Paradigm Persona 5F loudspeaker Specifications

Sidebar 1: Specifications

Description: Three-way, floorstanding, bass-reflex loudspeaker. Drive-units: 1" (25mm) beryllium-dome tweeter, 7" (178mm) beryllium-cone midrange, three 7" (178mm) X-PAL-cone woofers. Crossover frequencies: 450Hz, 2.4kHz. Frequency response: 45Hz–45kHz, ±2dB (on axis); 45Hz–20kHz, ±2dB (30° off axis). Low-frequency extension: 23Hz. Impedance: "compatible with 8 ohms." Sensitivity: 93dB (in room), 90dB (anechoic). Maximum input power: 300W. Recommended amplification: 15–500W.
Finishes: Carbon Black, Vanta Black, Harmony White (high gloss); Aria Blue, Sonic Silver (metallic gloss); 18 custom finishes.
Dimensions: 46.7" (1185mm) H by 9.5" (241mm) W by 16.8" (427mm) D. Weight: 94.8 lb (43kg).
Serial numbers of units reviewed: AGG5219403J08, AGG5219404J08; "Crafted in Canada."
Price: $17,000/pair; custom finish, add $2550/pair. Approximate number of dealers: 70. Warranty: 5 years.
Manufacturer: Paradigm Electronics Inc., 205 Annagem Boulevard, Mississauga, Ontario L5T 2V1, Canada. Tel: (905) 564-1994. Web: www.paradigm.com.

COMPANY INFO
Paradigm Electronics Inc.
205 Annagem Boulevard
Mississauga, Ontario L5T 2V1
Canada
(905) 564-1994
ARTICLE CONTENTS

COMMENTS
mtrot's picture

Excellent! Your impressions reflect exactly mine about the 3F. Considering that Paradigm only rates low frequency extension to be 1Hz deeper with the 5F over the 3F, I'm wondering under what circumstances it would behoove someone to pony up the extra dollars for the 5F.

gabemtz83's picture

dont base the frequency response based on a spec sheet. The 5F sounds tremendously bigger than the 3F. I own both Persona 7Fs and 5Fs. I recently put the 5F's in my theater room after days of comparing to the 3F. As i already own a set of 7F's in my living room, it was gonna be hard to convince myself to spend the difference for the 5F. After hours of comparing the two i had to go with the 5Fs. They sound so much bigger! Thats saying a lot because the 3F is an incredible speaker!

Kal Rubinson's picture

I cannot say but I recently heard the 3f and didn't find the bass lacking. However, that was under unusual and unfamiliar circumstances.

Bogolu Haranath's picture

Is 5F "Persona non grata"? :-)..........

Indydan's picture

I've owned 3 pairs of Paradigms at different price points. I find them good for home theater, but there are more refined speakers for music.

gabemtz83's picture

Persona is not your average paradigm!

Johnseye's picture

I think one of Kal's points was that the Persona's aren't what you've heard from Paradigm in the past. I would agree 100%.

yooperaudio's picture

Thanks for the enjoyable review of the Paradigm speakers. I noticed your comment about the Benchmark AHB2s (which I own) - is the known feature of the AHB2s that you referenced just that they reveal a lot of detail, or that they reveal detail better when floor-standing speakers are positioned in a straight-ahead position (30 deg. off-axis to your nose)? Mine are at about 25 deg. off-axis now (about 5 deg. toe-in from straight ahead), and they are doing very well, but I've never thought of pointing the speakers straight ahead to hear what happens. I've got an equilateral triangle setup, with my seating position maybe 10-12" father out from equilateral apex. Guess I'll try it - thanks again!

Kal Rubinson's picture

This is a work in progress. I have been listening to some speakers "on-axis" with the AHB2s and, for multichannel, prefer it. However, it is not always possible for other speakers.

jeffhenning's picture

"AHB2 question about speaker positioning..."

"...is the known feature of the AHB2s that you referenced just that they reveal a lot of detail, or that they reveal detail better when floor-standing speakers are positioned in a straight-ahead position (30 deg. off-axis to your nose)? Mine are at about 25 deg. off-axis now (about 5 deg. toe-in from straight ahead), and they are doing very well, but I've never thought of pointing the speakers straight ahead to hear what happens. I've got an equilateral triangle setup, with my seating position maybe 10-12" father out from equilateral apex."

"I have been listening to some speakers "on-axis" with the AHB2s and, for multichannel, prefer it. However, it is not always possible for other speakers."

Seems like a lot talk about speaker positioning and the amp being used.

Again, an AHB2 will have no effect on the speaker's in room frequency response and the speaker's radiation pattern.

Do you need more explanation?

Kal Rubinson's picture

The first two quotes are from another poster and the third does not even imply anything like what you infer. I do not require anything further of you. (This is not to say that I am disputing what you have posted.)

jeffhenning's picture

Your speakers and their frequency response, group delay and dispersion patterns will have several (or several dozen) orders more effect on where you position them in room than the amp driving them. Most likely it will make no difference at all with a load invariant amp like the AHB2.

There is no amp on the planet better than the AHB2. There are a couple manufacturers that make amps on par with Benchmark. Not one of them costs less than 200% more than an AHB2.

I digress though.

Your amp is not the solution or problem. Your speakers and room acoustics are the problem. No amp can fix them. You need better speakers or better acoustics or both.

If you can't win races with an engine that has more HP than everyone else, you should be looking at the set up of your car. And if that is as good as everyone else's, then, you need to look at who is behind the wheel. That works on every race track in the world.

The analogy is valid.

Just sayin'.

Kal Rubinson's picture

I do not know who or what you are addressing in your post. No one has suggested that any of the three amps were a problem or a solution. We are talking about one specific pair of speakers. Just sayin'.

Bogolu Haranath's picture

Is it possible to get in-room frequency response for KR's listening room like JA's and MF's listening rooms? :-) .............

Kal Rubinson's picture

AFAIK, JA does measurements in the reviewer's home listening room in cases where the product (usually a loudspeaker) is too large and heavy to be efficiently shipped or for him to physically manuever on his own. In recent memory, he measured the BeoLab90 speakers in my room.
https://www.stereophile.com/content/bang-olufsen-beolab-90-loudspeaker

Bogolu Haranath's picture

BTW ......... These Persona 5F speakers are approximately the same price as the Kii Three active, built-in DSP speakers which were favorably reviewed by KR and listed under Class-A Stereophile :-) ........

Bogolu Haranath's picture

For passive speakers we could use external EQ/DSP for optimizing the in-room response and to suit personal listening preferences. Lot of home theater processors(pre-pros)/receivers come with built-in EQ/DSP, for example :-) .........

KR reviewed several such external EQ/DSP products in the Stereophile recommended component list :-) ..........

dalethorn's picture

There's a product (a tweak) you can find in most audiophile shops, which looks like a coat hanger with cupped hands on each end. You wear it on your shoulders/neck like a collar and the 'hands' sit behind your ears. The soundstage and sense of aliveness it brings are amazing, and given that the 'hands' can be turned a few degrees each direction helps to tune the response.

Kal Rubinson's picture

Sure, we could use DSP/EQ and, generally, I do. But for stand-alone reviews (i.e., not in my column "Music in the Round"), I always set up and assess the product as will the majority of readers: Without DSP/EQ unless built into the product. The reason is to report on the inherent capability of the product as it comes from the manufacturer.

Now, I am aware that this seems like a false dichotomy because there is no justification for abjuring DSP/EQ with stereo and yet to rely on it for multichannel. I do use for both!

dalethorn's picture

I wouldn't want to take this too far off course, but ..... there are many equipment reviews here that describe (apparently) small differences in sound, where such differences justify a significant expenditure. So when an external/addon DSP is figured in, not only would we be talking about much larger differences in sound due to the user's DSP settings, but I would expect at least small differences in sound from the DSP itself when the settings are flat, neutral, or otherwise zeroed out - just because the DSP was added into the signal path.

Bogolu Haranath's picture

May be you could review the latest DEQX flagship model HDP-5? :-) ............

Kal Rubinson's picture

I did review the DEQX PreMate in 2014. Is there a compelling reason to review the HDP-5?
https://www.stereophile.com/content/deqx-premate-da-processordigital-equalizer

Bogolu Haranath's picture

I know about your review of the DEQX PreMate ........... I read that review ......... The new HDP-5 has additional capabilities including Roon ...... You can check the DEQX website .......... May be a follow-up review, if possible :-) .........

Kal Rubinson's picture

I do not think the inclusion of Roon justifies consideration since Roon is a known matter. Are there any other significant and new inclusions?

I am not trying to be difficult (although it may seem so) because I am a big fan of DEQX and would consider using it if they offered something that was suitable for my multichannel system. The issue is whether there is a reason for a follow-up.

Bogolu Haranath's picture

From what I see from the DEQX website, we may need several HDP-5 units for multi-channel configuration ...... My interpretation may not be correct ......... You may have to directly communicate with the manufacturer and/or a representative. I'm sure they are gonna be happy to communicate with you. Your review is featured on their website :-) ...........

Kal Rubinson's picture

True. They know of my interest but they have not determined that it is worthwhile for them to make a single device appropriate for a multichannel system. I would love a 6-8channel DEQX.

Russellbobby's picture

and haven't looked back.
Even though they have similar measurements to the 3F they just sound much "bigger". Heard these at Axpona with a pair of Mono Mcintosh MC611 doing 1 kilowatt peaks and these speakers never even shivered. 105 db at 20 ft in a 30x60x20 banquet room. Just saying they will rock as well as play as intimate as you like.
I am only 20 inches off my front wall but still have front to back depth between players. The beauty of the down firing port as you don't need a lot of room with these speakers. Running a couple of Odyssey Kismet monos and a MicroZotl 2.0S and they sound pretty damn nice. Much better in the mid and lower bass and a much more balanced sound overall than the Magico's.

MDKELLY504 Atreides's picture

I own the Signature 6S’s; anyone compare the Performa 5F speakers to the Signatures?

X