Recommended Components: Fall 2020 Edition Loudspeakers

Loudspeaker Systems

Editor's Note: Class A "Loudspeakers" are sufficiently idiosyncratic and differ enough from one another that prospective customers should read Stereophile's original reviews in their entirety for descriptions of the sounds. We have therefore just listed every system or combination that at least one of Stereophile's reviewers feels, as a result of his or her experience, approaches the current state of the art in loudspeaker design. (Note that, to be eligible for inclusion in Class A, the system must be full-range—ie, feature bass extension to 20Hz. It must also be capable of reaching realistic sound-pressure levels without any feeling of strain.)

For those unconcerned about the last few hertz of low-bass extension, we have created "Classes A, B, and C (Restricted Extreme LF)" for those speakers that are state of the art in every other way. Candidates for inclusion in this class must still reach down to at least 40Hz, below the lowest notes of the four-string double-bass and bass guitar.

Someone once asked us why Stereophile bothers to review inexpensive loudspeakers at all: In effect, aren't we insulting our readership by recommending that they buy inexpensive models? Remember: It's possible to put together a musically satisfying, truly high-end system around any of our Class D recommendations. That's why they're listed—and why you should consider buying them.

A (Full-Range)

Bang & Olufsen Beolab 90: $85,000/pair ★
(Vol.40 No.1 WWW)

Dutch & Dutch 8c: $12,500/pair (stands necessary)
(Vol.42 No.8; Vol.43 No.4 WWW)

Egglestonworks Viginti : $39,995/pair
(Vol.41 No.6 WWW)

GoldenEar Technology Triton Reference: $9999.98/pair $$$
(Vol.40 No.12 WWW)

Göbel Divin Marquis: $80,000/pair in standard finish
See JA's review in this issue.

Magico M2: $56,000/pair plus $7600/pair for MPOD Base
(Vol.43 No.2 WWW)

Magico S5 Mk II M-Cast: $41,800/pair ★
Price is with M-Cast (textured powder-coat) finish. M-Coat high-gloss paint adds $5225. (Vol.40 No.2 WWW)

MartinLogan Renaissance ESL 15A: $24,999.98/pair ★
(Vol.40 No.1 WWW)

mbl Radialstrahler 101 E Mk.II: $70,500/pair ★
(Vol.35 No.4 WWW)

Revel Ultima2 Salon2: $21,998/pair ★
(Vol.31 No.6, Vol.32 No.3, Vol.42 Nos.5 & 7 WWW)

Rockport Technologies Avior II: $38,500/pair ★
(Vol.40 No.8 WWW)

Sonus Faber Aida: $130,000/pair
(Vol.41 No.10 WWW)

Tidal Audio Akira: $255,000/pair
Vol.41 No.11 WWW)

Vandersteen Audio Quatro Wood CT: $16,315/pair
Rating assumes it is used with its companion M5-HPA high-pass amplifier. (Vol.42 No.11 WWW)

Vimberg Mino: $31,000
Accuton diamond tweeter upgrade (not reviewed) costs $8500/pair. (Vol.43 No.4 WWW)

Vivid Audio Giya G1 Spirit: $93,000/pair including external crossovers
(Vol.41 No.1 WWW)

Von Schweikert Ultra 55: $100,000/pair
Price is for version reviewed, with powered woofers. Passive version costs $95,000/pair. (Vol.43 No.7 WWW)

Wilson Audio Specialties Alexia Series 2: $57,900/pair
(Vol.41 Nos.7 & 8 WWW)

Wilson Audio Specialties Alexx: $109,000/pair ★
(Vol.40 No.5 WWW)

A (Restricted Extreme LF)

Bowers & Wilkins 805 D3: $6000/pair (stands necessary) ★ Stands: $599.99
The smallest model in Bowers & Wilkins's Diamond line, the 805 D3 features a 1" diamond-dome tweeter carried over from earlier models (though B&W say they've improved its motor system) and a 6.5" woofer made of Continuum, a proprietary woven material that replaces the resolutely yellow Kevlar of the company's earlier speakers. The woofer is reflex loaded with a flared port on the front panel, and the tweeter is loaded with a transmission line inside an aluminum housing shaped like the head of the xenomorph from the Alien franchise. Placed atop 24"-tall, sand-and-lead-filled Celestion stands, the 805 D3s presented JA with "astonishing clarity in the midrange and treble," coupled with "impressive dynamic capability." He also noted that B&W's designers have "managed an optimal balance between bass power and control," evinced by the speaker's ability to reproduce double bass "with good weight, but also with the leading edges of notes well defined." Tape hiss in one recording and vocal sibilants in another were more audible than expected, leading JA to remark that "this is a speaker that will verge on the edge of excess with unsympathetic ancillary components, or in a room that itself emphasizes the highs"—an observation borne out during JA's test regimen, which revealed "a somewhat 'tailored' frequency response in the treble." (Vol.40 Nos.3 & 5 WWW)

DeVore Fidelity Gibbon 3XL: $3900/pair (stands necessary) $$$ ★
Hand-built in Brooklyn, New York, the Gibbon 3XL has a beautifully finished cabinet made mostly of solid bamboo, and uses an unusual 0.75" tweeter and a 5" midrange/woofer custom-designed for DeVore by SEAS. The speaker has a claimed sensitivity of 90dB and a nominal impedance of 8 ohms, never dropping below 7.4 ohms. While the comparably priced Harbeth Compact 7 ES-3 offered a slightly richer, fuller sound, the Gibbon 3XL produced excellent low-level resolution, reasonably wide dynamics, and stable, pinpoint imaging, said ST in June 2010. In his April 2017 Follow-Up, HR wrote that his time with the 3XLs was all about "Leica-like focus, pulsing flow, [and] fresh-air transparency." He added that, although their bass performance was limited, the DeVores' "ability to reproduce human voices, chamber orchestras, and architectural spaces was as good as those things get." The almost obligatory matching bamboo stands add $695/pair. (Vol.33 No.6, Vol.40 No.4 WWW)

DeVore Fidelity Orangutan O/96: $13,200/pair (stands included) ★
Handmade in Brooklyn, New York, the O/96 is a two-way, reflex-loaded, stand-mounted speaker with a rated sensitivity of 96dB/W/m and an unusually high nominal impedance of 10 ohms. The wide-baffle design measures 28.25" H by 18" W by 12" D and has a 1" silk-dome tweeter and a 10" paper-cone woofer. The O/96 exhibited a superb overall tonal balance with impressive clarity, color, impact, drama, and scale, said AD. "The O/96 is distinctly easy to drive with low-power amplifiers, yet it's clearer, wider of bandwidth, and more spatially accomplished than most other high-sensitivity loudspeakers," he summed up. JA's measurements uncovered a low-treble resonance and a lively enclosure, but these problems were considerably less audible than he was expecting. AD originally considered this a very high Class B recommendation, bordering on Class A, but as of April 2015, the rating is upgraded. In a Follow-Up, AD noted: "I have refined my own O/96 installation, moving each speaker farther from its sidewall, and minimizing the influence of unfortunate room characteristics with some John DeVore–inspired asymmetry," with excellent results. AD also quoted John DeVore's observation that, in 2013, the O/96 was his best-selling model "by a clear margin. I wouldn't be surprised to see that it did that again in 2014." (Vol.35 No.12, Vol.38 No.1, Vol.40 No.9 WWW)

Dynaudio Contour 20: $5250/pair (stands necessary) ★
The 17.3"-tall, 34.2lb Dynaudio Contour 20, which HR described as "luxuriously large and heavy for a stand-mounted model," has a 1.1" Esotar2 soft-dome tweeter and a 7.1" Magnesium Silicate Polymer (MSP) mid-woofer, crossed over at 2.2kHz and bolted to a ½"-thick aluminum baffle. Resistive loading for its rear-mounted reflex port is user-adjustable by means of foam inserts. Used with Dynaudio's optional Stand 6 ($500/pair), and following a few setup challenges—tube amplification of at least moderate power is among the key requirements—the Contour 20s rewarded HR with a soundstage that was "galaxy deep, the orchestra precisely arranged on it," plus "a lively sonic luminescence" and "fierce forward momentum" on classic bluegrass music. While expressing his belief that "a loudspeaker expresses its full character in how and where it directs the listener's attention," HR praised the Contour 20 for performing "well on both the poetic and scientific levels," offering "a near-perfect balance of the Apollonian and the Dionysian." In measuring the Contour 20, JA found a sensitivity slightly lower than specified (84.2 vs 86dB), and a faint port whistle that was audible only from behind the speaker; he declared the Dynaudio an exemplar of "excellent audio engineering." In the May 2017 issue, JA described trying the Contour 20s in his own listening room. Compared with the similarly priced and more sensitive Bowers & Wilkins 805 D3, he found that the Dynaudio extended lower in the bass, and while it gave richer-toned accounts of some instruments, it offered "more neutrally balanced top octaves." The Contour 20 is, JA concluded, "a true monitor speaker." Add $750/pair for premium finishes. (Vol.40 Nos.4 & 5 WWW)

Harbeth Monitor 30.2XD: $6795/pair (stands necessary)
In its "well-crafted, elegantly proportioned," 18.1"-tall reflex-ported cabinet, the Harbeth Monitor 30.2 combines a 7.9" bass-midrange cone made of Harbeth's proprietary Radial2 polymer with a 1" soft-dome tweeter from SEAS. For the 40th Anniversary Edition of this model, derived from the BBC's LS5/9 design, Harbeth sweetens the deal with an exclusive silver eucalyptus veneer, a restyled tweeter grille, better crossover capacitors, and upgraded internal wiring and binding posts. Used on 24"-tall stands from TonTräger Audio ($1495/pair), the Harbeths delighted HR with easy-flowing music, vivid colors and textures, "unshakable clarity," and stereo images that were "tangibly there." Herb's verdict: "the most tuneful, accurate, neutral, fun, and music-loving stand-mounted two-way speaker I've heard." Writing from his lab, JA reported higher-than-specified sensitivity (87.3 vs 85dB) and benign impedance characteristics ("it should be an easy load for amplifiers to drive"), and declared the Monitor 30.2 "as well-engineered a design as I have come to expect from [Harbeth chief designer] Alan Shaw and his respect for the BBC tradition." (Vol.41 No.4 WWW)

Joseph Audio Perspective2: $14,999/pair
Introduced in 2013, the floorstanding Perspective started life with a SEAS 1" impregnated-fabric dome tweeter and two SEAS 5.5" magnesium-cone woofers. After its 2019 upgrade to Perspective2 status, the tweeter remains, but the woofers have been replaced with 5.5" SEAS Excel Graphene drivers, in which magnesium-alloy cones are coated with a graphene-based "nanomaterial." JA, who in 2014 reviewed the Perspectives, wrote that the Perspective 2s "produced the same wide sweep of full-range sound and tangible stereo imaging" that impressed him with the originals: "The low frequencies were still rich, but perhaps the articulation was even better." He also found the Perspective2s to be more tolerant than their predecessors of overly bright recordings. Reporting from his test bench, JA confirmed that, like the original, the Perspective2 was easy to drive if somewhat less sensitive than average, and concluded by recommending the new speaker "even more highly than I did the original." (Vol.37 No.7, Vol.42 No.7 WWW)

Joseph Audio Pulsar2 Graphene: $9000/pair (stands necessary)
The compact (15" H by 9" W by 13" D), rear-ported Pulsar produced sweet treble, a neutral midrange, solid bass, and superbly focused images, for a natural, involving overall sound, said MF. JA was impressed by the Pulsar's superbly flat on-axis response and well-damped enclosure. HR, having long enjoyed the Joseph Pulsars at audio shows, borrowed a pair in 2018 and wrote in his Follow-Up that the Pulsars worked hand in hand with a much-loved recording to "let me delight in sound purely for the sake of sound." Herb felt the Pulsars lacked "the more saturated tone and deeper textural descriptiveness" of Harbeth's 30.2 40th Anniversary Edition loudspeakers, but were more transparent, and provided better stereo imaging. He summed up: "The Pulsar is a reference-quality loudspeaker." The Pulsar has been updated with drivers coated in a graphene-based "nanomaterial," but based on JA's experience with the larger Perspective, the new Pulsar is likely to remain recommendable. (Vol.35 No.6, Vol.41 No.7 WWW)

KEF LS50 Anniversary Model: $1499.99/pair $$$ (stands necessary) ★
This tribute to the famed LS3/5a monitor was made to celebrate KEF's 50th anniversary. Measuring just 11.9" H by 7.9" W by 10.9" D, the two-way, reflex-loaded design combines, in KEF's Uni-Q driver array, a 1" vented aluminum-dome tweeter and a 5.25" woofer cone of magnesium-aluminum alloy. The beautifully finished, computer-modeled MDF cabinet incorporates a convex front baffle, offset port, and damped internal cross-bracing for optimal suppression of external sound radiation and internal standing waves. The LS50 produced a surprisingly large, clean, transparent sound, with natural tone color and precise, stable stereo imaging, said JA, who also noted superb measured performance. "Recommended. Highly." ST found the LS50's tonality "spot-on, more neutral than sweet," adding that the diminutive KEFs could deliver "surprising bass: down to around 50Hz." ST's verdict: "I haven't had such great sound in my listening room since the departure of Quad's ESL-2805 electrostatics." As SM put it: "In 13 years of working at Stereophile, I have not seen another component that offers such a radical combination of value and performance." Late in 2014, after spending time with some new LS50 samples that he had purchased, JA wrote: "[Although] it had been two years since I'd last listened to the KEF LS50 at home, getting a new pair reminded me why I had so highly recommended them. The KEF LS50 gave a sound that was evenly balanced from the upper bass through the high treble, with superbly defined imaging." (Vol.35 No.12, Vol.37 Nos.5 & 6, Vol.38 No.1 WWW)

Kii Audio Three: $16,985/pair including Kii Control ★
In a field of endeavor in which, according to KR, "we have not seen anything really new in a long time," the Kii Three impressed him as "a refreshing splash of cool water." This three-way, six-driver loudspeaker is self-amplified—each Three contains six 250W Ncore class-D modules—and uses an integral DSP system to perform crossover functions, room-boundary compensation, phase equalization, and to allow the user to shape the radiation pattern of its drivers. (As KR remarked near the end of his review, "the only valid comparison was with B&O's BeoLab 90.") Bundled with the Three—which stands only 16" tall and is intended for use on purpose-made stands—is a wired remote control for volume adjustment, input selection, and other functions. In spite of the Kii's modest size, it was, per Kal, "entirely satisfying in delineating the descending pedal notes" in a favorite pipe-organ recording, and was "almost unique" in its ability to convey "the sensation of a single throbbing column of air." Not only that, but the Threes' "dynamic range was huge," and KR was impressed by their soundstaging and transparency: "The Kii Three didn't just lift a veil away from the music—it removed a heavy cloak." In measuring the Kii, JA noted its lively enclosure, but was otherwise "very impressed." (Vol.40 No.9 WWW)

Manger s1: $24,995/pair
The active version of the Manger p1 that HR reviewed in December 2019, the s1 combines the unique Manger "bending-wave" drive-unit for the mids and highs with a sealed-box–loaded 8" woofer with a carbon fiber/paper sandwich. Controls are provided for treble level and Room Acoustics Correction. JCA found the s1 sounded most neutral with the high-frequency control set to "0"—the sound became a little hard if he increased the treble—but he did boost the 50–80Hz band by 3dB to better match his room. JCA summed up the Manger's sound as "Fast, pure, more articulate than smooth. The bass is present—all there—but don't expect to bathe in it. The s1 leans more toward exciting than toward comfortable, but not excessively so." Price is for satin finish; wood veneer adds $4000/pair. High-gloss finish adds $7000/pair. (Vol.43 No.9 WWW)

Paradigm Persona 5F: $17,000/pair
Q: What do you get when a company that specializes in high-value, high-tech loudspeakers sets its sights on the High End? A: Something very like the new Paradigm Persona series—so says KR, who tried the Persona 5F in his reference system and declared it "an auspicious entry into the thinner air of high-end audio." Kal also suggested that the key word in the Persona story is beryllium, as in the 5F's 1" beryllium-dome tweeter and 7" midrange driver. The speaker's three 7" woofers have aluminum cones, and are loaded by a bass-reflex enclosure made from seven layers of HDF, bonded to one another under high pressure, with RF waves used to cure the adhesive. (Try making something like that in your garage!) According to KR, that all adds up to a pair of well-balanced, full-range speakers that favor no one style of music, and that "disappear" from the soundstage "like aural Cheshire Cats." In measuring the Persona 5F, JA discovered slightly lower than the specified sensitivity (88 vs 90dB), and an impedance characteristic that augurs in favor of "an amplifier compatible with 4 ohm loads." Those quibbles aside, he proclaimed the Paradigm an example of "textbook audio engineering." (Vol.41 No.10 WWW)

Q Acoustics Concept 300: $4499.99/pair with stands, $3599/pair without stands
The unusually proportioned Concept 300—it is deeper than it is tall and, at 32lb, perhaps heavier than the average 14"-tall loudspeaker—is supplied with its own Tensegrity stands (included), which incorporate a sprung plate that's essential to the speaker's performance. Drivers are a 1.1" coated-microfiber-dome tweeter, isolated from the baffle with a rubber gasket to ameliorate intermodulation, and a reflex-loaded 6.5" woofer with a coated/impregnated paper cone. The enclosure walls are made with three layers of MDF, compliantly isolated from one another and strategically braced. In auditioning the Concept 300s, JA remarked upon their "stable, accurate imaging," "well-preserved" low-level detail, and the ability to play louder in the bass range than his reference KEF LS50s. In his role as Technical Editor, JA measured far lower than the specified sensitivity: 86 rather than 90dB; otherwise, he felt that "the Q Acoustics Concept 300 offers excellent measured performance." (Vol.43 No.1)

Q Acoustics Concept 500: $5999.99/pair
This two-way, three-driver floorstander combines a 1" microfiber soft-dome tweeter with two impregnated/coated-paper-cone 6.5" mid-woofers, the three arranged in a vertical D'Appolito configuration. The Concept 500's 45.3"-tall enclosure is made of triple layers of MDF separated by a proprietary nonsetting gel; resonances are further tamed by what Q calls Helmholz Pressure Equalization (HPE), in which tuned tubes are added to the cabinet interior. The crossover is a fourth-order Linkwitz-Riley type. Played in TJN's medium-large listening space, an orchestral soundtrack recording "sounded superb through the Concept 500s, with excellent imaging, convincing depth, and a remarkable sense of space surrounding the performers, particularly the chorus." With other recordings, Tom noted an absence of obvious colorations, but did point out that bass response "wasn't quite as punchy, powerful, and deep as I've heard from a few other speakers in my room." Reporting from his test bench, JA noted a "usefully higher than average" sensitivity of 89.2dB, and opined that the Concept 500's bass is "optimized more for definition than weight." His conclusion: "I was impressed by the Concept 500's measured performance." (Vol.42 No.3 WWW)

Quad ESL-2912: $17,995/pair ★
The new Quad ESL-2912 electrostatic loudspeaker is a direct descendent of the Quad ESL-989, itself a variation on the successful Quad ESL-63—the speaker in which designer Peter J. Walker introduced his concept of annular-ring stators fed by progressively delayed signals, to mimic point-source dispersion. The ESL-989 was, in essence, a taller ESL-63 with two more bass panels, with consequently better bass performance and higher maximum SPL levels. The ESL-2912, manufactured in China, is offered as a better-built and thus performance-optimized ESL-989, with such refinements as a stiffer frame, veneered plywood panels intended to further stiffen and damp the speaker, physical separation of the ESL-2912's power-supply and audio circuits, and a more acoustically transparent grillecloth/sock. RD, no stranger to electrostats in general or Quads in particular, praised the ESL-2912 for its ability to play loudly enough and to provide sufficient bass extension and power. But, he wrote, "the greatest strength of the Quad ESL series, beginning with the ESL-63, has been, and continues to be, its midrange: smooth, revealing . . . and presenting a virtual open window on the music." JA's measurements uncovered a high treble range that's "first a little peaky, then rolls off sharply above 15kHz or so," and a "hashy" waterfall plot, the latter "like that of every other panel speaker I've measured." (Vol.40 No.8 WWW)

Revel Performa F228Be: $10,000/pair
The first floorstanding model in Revel's recent Performa line, the F228Be is a three-way, four-driver loudspeaker in which two 8" ceramic-and-aluminum-cone woofers and a 5.25" ceramic-and-aluminum-cone midrange driver are mated with a 1" beryllium-dome tweeter, that last driver seated within a shallow waveguide and fitted with an acoustic lens. The Performa F228Be stands 46.5" tall and weighs 82lb. KR writes that, from even the first sounds he heard through the Revels, it was apparent that their midrange was "consistently clean, open, and balanced." In the weeks that followed those impressions gained strength, leading Kal to remark that, consistently, "individual voices and instruments sounded more honestly natural and balanced with each other than I'd heard them before from these same recordings." He also noted bass performance that was "full, extended, and surprisingly tight," adding that he "wouldn't consider adding a subwoofer to a pair of F228Be's." In measuring the Revel, JA noted a slightly demanding impedance curve, indicating the need for an amplifier comfortable with 4 ohm loads. That said, he proclaimed the F228Be's performance indicative of "excellent speaker engineering." (Vol.42 No.2 WWW)

Sonus Faber Guarneri Tradition: $16,900/pair (stands included)
Like its distinguished forebears, this fourth iteration of the Sonus Faber Guarneri has an enclosure made from multiple thin sheets of tonewood, the shape of which suggests, in cross section, a lute: a nod to its nominal family of luthiers as much as a structurally and acoustically motivated design element. The two-way design has a 1.1" silk-dome tweeter, enhanced with a tiny damping pad held against its diaphragm by a slender exterior bracket, and a 5.9" sandwich-cone mid/bass driver, both on a baffle covered in Italian leather (the rest of the cabinet is veneered with the tropical hardwood wengä). The low-frequency driver is reflex-loaded with a rear-mounted rectangular port that's radiused and lined with rubber at its top and bottom and damped with foam—basic black, of course. Playback quality was no less elegant: While listening to a track from Peter Gabriel's Scratch My Back, JA noted that the double-bass line "was reproduced with enough low-frequency power to support the music, while the image of the singer was palpable." In other recordings, low-level details were clear "without . . . being unnaturally spotlit," and JA praised the Sonus Fabers' "delicate-sounding high treble" and stable, detailed imaging. Writing from his test bench, JA observed "a small but well-defined peak" at 2kHz, noting that there is otherwise "a lot to admire in the Sonus Faber Guarneri Tradition's measured performance." (Vol.41 No.3 WWW)

TAD Micro Evolution One: $14,995/pair (stands included in price)
TAD's first domestic loudspeaker not designed by Andrew Jones (now of Elac), the Micro Evolution One—ME1 for short—is a three-way loudspeaker that, at first glance, appears to have only two drivers: its 1" beryllium-dome tweeter and 3.5" magnesium-cone midrange driver are, in fact, concentric with one another, a technology that is TAD's spécialité du chez. Lower frequencies are handled by a 6.5" composite-cone woofer loaded with slots engineered into the sides of the ME1's plywood, MDF, and steel enclosures, and which TJN guessed might betray a variation on aperiodic loading. (Spoiler alert: JA's measurements uncovered behavior suggestive of traditional reflex loading.) Used well away from the walls of his 21' by 16' room, the ME1s impressed TJN with their resolving ability: "Subtle shadings of instrumental percussion textures were far more evident than I'm accustomed to hearing, and the distinct reproduction of the ambience of the recording venue added welcome helpings of air and depth." The TAD's midrange performance was commendably neutral—"instrumental timbres were convincingly reproduced, as were the voices of a wide range of singers"—but while bass was "consistently tight and well defined," the ME1's response didn't extend as low as some might wish, with "just-audible output" at 40Hz. JA's measurements confirmed the TAD's less-than-Stygian bass performance—apart from which, he observed that the ME1 offered "excellent measured performance." Not long after making those measurements, encouraged by TJN's positive report and spurred by an enthusiastic HR, JA installed the ME1s in his own listening room and proclaimed: "Herb and Tom were right: It may be expensive, but TAD's Micro Evolution One is indeed a special loudspeaker." Matching ST3 stands cost $2500/pair. (Vol.41 Nos.2 & 3 WWW)

Vivid Audio Kaya 45: $18,000/pair
Vivid's Kaya 45 is a three-way loudspeaker in a distinctive enclosure made of a glass-reinforced sandwich material of intentionally varying thickness. Drivers are a 1" aluminum-dome tweeter, a 4" alloy-cone midrange driver, and two side-mounted 5" alloy-cone woofers, physically braced to each other to cancel extraneous vibrations; the woofers are reflex-loaded while the other drivers are loaded with closed, exponentially tapered tubes. In KR's system, a pair of Kaya 45s proved "marvelous in their rendering of voices, individual and massed;" male voices in particular were "endowed with appropriate body, but without unnatural resonance." Kal also noted that "the bass performance of the Kaya 45s was remarkable for their size." Technical Editor JA found the Vivids to be more sensitive than specified—90 instead of 87dB!—but that good news was slightly offset by an impedance curve that suggested the need for "amplifiers that are comfortable with 2 ohm loads." He adds: "Almost full-range." (Vol.43 No.2 WWW)

Wilson Audio Sasha DAW: $37,900/pair
Derived from the original Sasha W/P of 2009—itself based upon Wilson's long-running WATT/Puppy line—the Sasha DAW is named in honor of company founder David A. Wilson, who passed away in 2018. Compared to previous Sashas, the DAW has more voluminous upper and lower enclosures, built with thicker panels. Other changes include a redesigned crossover with all–second-order filters, and a textile-dome tweeter as opposed to one with a titanium inverted dome. With the Sasha DAWs in his system, SM reported increased texture and detail over his reference speakers and praised the Wilsons for communicating "pace, snap, drive, and speed" in his favorite recordings. And he noted that, in terms of reproducing orchestral crescendi with full power and weight behind the bass drum, the new Sashas "took things to another level." In measuring the Sasha DAW, JA found evidence of "optimal crossover topology" and noted the speaker's "careful balance between frequency and time domains." (Vol.43 No.1 WWW)

B (Full-Range)

Bowers & Wilkins 702 S2: $5000/pair
Derived from Bowers & Wilkins's 800 series, loudspeakers in the 700 series differ from their upscale cousins in two ways: the speakers are made in China rather than Sussex, England, and their cabinets are rectangular rather than curved—and are thus easier and less expensive to build. So it is with the top model in the line, the three-way, reflex-loaded 702 S2, which retains the solid-body, bullet-shaped tweeter housing of the 800 series—yet here that housing has been re-engineered to suit a flat-sided enclosure, in addition to which the tweeter it houses has a carbon rather than a diamond dome. (Yes, I know, those are both carbon; work with me here.) Also from the 800 series is a 6" midrange driver made of the company's silvery woven Continuum material, supplemented with three 6.5" Aerofoil-laminate woofers. Driven by solid-state amplification (Classé Sigma monoblocks and a Parasound Halo A 31), the 702 S2s impressed KR from here to next Sunday: "The tonal balance from bottom to top of [the piano's] range was well nigh perfect. The reproduction of the sound of the violin, too, was excellent." Kal also noted "full, firm" bass, dynamic capabilities that allowed percussive effects to be startling, and convincing spatial performance, even if the 702 S2s's soundstage wasn't quite as deep as that of the 804 D3s. In measuring the 702 S2, JA confirmed its high (90dB) sensitivity, though its impedance curve suggested use with a robust amplifier. He concluded that, despite some unevenness of response, with careful setup this B&W "can produce very satisfying sound." (Vol.41 No.5 WWW)

DeVore Fidelity Gibbon X: $15,890/pair
The Gibbon X is a three-way, four-driver design with a 0.75" ultra-low-mass textile dome tweeter, a 7" midrange driver with a phase plug, and two 9" side-mounted long-throw woofers, contained within a 46"-tall structure that is essentially two enclosures: an inner one made of plywood, and a bamboo outer shell. Of particular note is the next-to the lowest chamber: an area where the inner, plywood enclosure has no side walls, and so the bamboo outer walls are allowed to vibrate. In JCA's large (32' by 24') listening room, the Xes "did not sound reticent or especially warm. I heard the X as a bid for neutrality. It had considerably more energy in the higher frequencies than other DeVore speakers I've listened to, and though its bass went deeper, it was leaner." In measuring the Gibbon X, JA found slightly lower than specified sensitivity—88.8dB instead of 91.5dB—but confirmed that the X is "relatively easy for an amplifier to drive." Otherwise, JA observed, "in most respects, the Gibbon X offers good measured performance." (Vol.42 No.3 WWW)

Focal Kanta No.2: $9990/pair
The Kanta No.2 combines a 1.1" beryllium inverted-dome tweeter with three 6.5" flax-sandwich cones, one used for midrange, two as a woofers. The baffle, which incorporates a reflex port—there's another one in back—is molded of a high-density polymer, while the rest of the enclosure is made of what Focal describes as a molded wood product. A glass top panel adds class. Driving a pair of them with his PS Audio M700 monoblock amps, RD noted that "The Kanta No.2 was transparent to the source, adding very little sound of its own." He pointed in particular to the Focals' treble range, which he described as "airy and extended—that beryllium tweeter was earning its keep," and to "surprising bass extension for the speaker's size." JA's measurements uncovered slightly-lower-than-specified sensitivity, and load characteristics that suggest the need for an amplifier well versed in the driving of low-impedance loudspeakers; overall, he said, the Kanta No.2 "offers excellent measured performance." The Kanta's available color combinations, each involving one color for the baffle and another for the rest of the enclosure, would require a blurb of their own; suffice it to say your choices are many. (Vol.41 No.11 WWW)

GoldenEar Triton One.R: $6599.98/pair
The successor to the original GoldenEar Triton One, the Triton One.R is a tall (54"), dark (black, with black grilles), and narrow (just 8" wide) floorstander. Active drivers are a Heil-alike folded-ribbon tweeter, two polypropylene-cone 5.25" midrange cones, and three 5" by 9" woofers with glass-fiber/Nomex composite cones; the latter are powered by an internal 1600W class-D amplifier—fitted with a user-adjustable level control—and assisted by four 7" by 10" planar passive radiators. KR found the Triton One.R's to be "capable of conveying the dynamics" of music and of presenting "a convincing image of the instruments and [preserving] their tone." JA's measurements uncovered sensitivity that was virtually up to spec (91.2 vs 92dB) and "impressively flat" response through the mids and trebles, contributing to the GoldenEar's "excellent measured performance." KR's verdict: "The One.R does it all, and at a fair price." (Vol.42 No.12 WWW)

KEF Reference 5: $20,000/pair
Like its stablemate, the demiflagship Blade Two (see elsewhere in Recommended Components), KEF's Reference 5 uses a Uni-Q coincident driver array to cover most of the audioband, plus four 6.5" aluminum-cone woofers for the lowest octaves. The most apparent distinction is in the Reference 5's enclosure: whereas the woofers in the Blade Two are fixed to the sides of a parabolically curved, narrow-fronted enclosure of high-density polymer, the Reference 5's woofers are mounted on the front of a conventional-looking floorstanding enclosure, its greatest departure from convention being KEF's choice of aluminum for the front baffle. The woofers are reflex loaded by means of two adjustable ports on the rear panel. JA noted the Reference 5s' "weighty but well-defined lows" and "sweet, smooth highs," and was mightily impressed with their spatial performance, noting their ability to resolve image depth with even mono recordings and observing, with a recording of his own making, that the Reference 5s didn't skimp in conveying reverberant information. Writing from his test bench, JA noted the KEF's benign load characteristics and praised its "excellent" engineering. (Vol.40 No.10 WWW)

Manger P1 Loudspeaker: $14,995 in basic finishes
To the pantheon of uncommon drive-unit technologies must be added the non-pistonic Manger Sound Transducer (MST), for which its manufacturer claims wide frequency range, superior time-domain performance, and frequency-independent impedance, among other nice things. Manger's own p1 is a 44.8"-tall floorstander in which the MST driver hands off to an 8" carbon fiber/paper sandwich woofer; the crossover frequency is an exceptionally low 360Hz. The Manger speakers impressed HR with their sheer lack of noise and "tight, bright, rhythmic, and 100% clear" if ungenerous bass. Herb concluded by praising the p1s for "reproducing music in a manner that felt uniquely unmolested." Reporting from his testing lab, Technical Editor JA noted lower than the specified sensitivity (85.6 instead of 89dB) and "a significant lack of presence-region energy off-axis. (Vol.42 No.12 WWW)

Monitor Audio Gold 300 G5: $7700/pair
The flagship of Monitor Audio's Gold line, the 300 is a three-way floorstander employing two 8" sandwich-cone woofers, a 2.5" ceramic-coated-aluminum midrange dome, and a 1" "Micro Pleated Diaphragm" tweeter—an air-motion transformer in all but name. In common with other Monitor models, the woofers are held rigid via threaded rods that fasten to the rear panel of the all-MDF enclosure; that panel is also home to twin reflex ports and twin pairs of binding posts. Outriggers of the usual sort hold the cabinet steady and can be used with or without spikes. TJN noted that the 300s' bass response wasn't subwoofer-like, but he praised the pleasing lack of muddiness in that range. He praised the midrange for a lack of "obvious coloration," adding that the 300s sounded "a trace more open and airy" than his own Monitor Silver 10s. Technical Editor JA noted slightly less-than-specified sensitivity (87.3dB instead of 90dB); otherwise, the 300s exhibited "excellent measured performance." (Vol.42 No.11 WWW)

Monitor Audio Silver 300: $2200/pair
Compared to its predecessor, the three-way, four-driver Silver 8, Monitor Audio's Silver 300 floorstander is similar in size, specifications, even price. The differences—apart from adding 292 to the model number—all come down to sound-enhancing refinements: a newly designed tweeter fires from behind a grille whose perforations are asymmetrical in the vertical but not the horizontal plane. Each drive-unit is held in place with a single long bolt fastened to a threaded insert on the enclosure's rear panel, for rigidity. And a mounting plinth has given way to four steel outriggers, to provide a wider, more stable stance. Perhaps unsurprisingly, KR wasn't surprised to find the Silver 300s "just as immediately appealing" as the Silver 8s: "Male and female voices, and orchestral and solo wind instruments, were tonally balanced and clearly delineated." He also noted that, "in terms of grip and delineation, the Silver 300's bass response was better than I might have expected from two 6" woofers." In measuring the Silver 300, JA noted that it came within 1.2dB of its high specified 90dB sensitivity, and that, in terms of impedance, "this speaker won't tax the amplifiers with which it is used." All in all, the Monitor Silver 300 impressed JA as "a well-engineered design." (Vol.41 No.3 WWW)

PMC fact.8 signature: $12,000/pair
This slim, two-way tower loads its twin 5.5" woofers with PMC's "Advanced Transmission Line," which, the company says, has a cross-sectional area at the start and end of the line "to be essentially as small as possible without compromising low-frequency performance and upper-bass absorption." KR found that the fact.8s needed to be much closer to the wall behind them, less than 1', than other speakers he had used in his room. Nevertheless, he felt that he was missing energy in the upper bass and low midrange. He also found that he had to play with both toe-in and the HF switch to get a suitable mid/treble balance and open up the center image and soundstage. "Removal of the front-panel grille enhanced and clarified midrange detail," he decided. JA's measurements revealed an accurate specified sensitivity of 89dB/W/m and a kind-to-amplifiers impedance of 8 ohms. He also found a lack of upper-bass energy in the PMC's frequency response due to the complex behavior of the woofers and the transmission line in the region where their outputs overlap. (Vol.43 No.5 WWW)

Spendor Audio Systems A7: $4995/pair
A revision of Spendor's long-running A6R, the new A7 floorstander mates a 7.1" polymer-cone woofer with a 7/8" silk-dome tweeter, the latter made by a third party. The woofer, which is made in-house, is reflex-loaded by a rear-firing rectangular port. Inside the 36.8"-tall enclosure are several layers of what Spendor describes as a "high-damping coefficient polymer." Additional small, internal damping blocks are applied where needed. In KM's smallish listening room, the A7s proved "persnickety as to where they would and wouldn't sing," but once dialed in, they produced "some of the most extended, tonally rich, and weighty frequencies ever to fill my room." The Spendors' spatial performance also impressed: "With disc after disc, the A7s produced solid images with lightning-fast delivery and impressive physicality—I could feel each instrument's unique texture in space." While measuring the Spendor A7, JA noted its commendable drivability, but also remarked on a resonance, possibly related to the distance between the woofer and its port, that might have complicated Ken's setup efforts. He concluded that, all in all, "the A7 offers good measured performance." (Vol.42 No.3 WWW)

Volti Audio Razz: $4999/pair
This beautifully constructed, high-sensitivity tower combines a horn-loaded 1" tweeter with a horn-loaded 2" midrange compression driver and a reflex-loaded 12" woofer. "The ability of Volti Audio's Razz to portray music of any genre with scale, realism, and thrilling dynamics is unmatched by any loudspeaker I've had in my system," wrote TG, adding that while the Razz demonstrates a lovely midrange liquidity, "there's no sacrifice of detail." While Volti specifies the Razz's sensitivity as 97dB, JA's estimate was somewhat lower at a still-high 93dB(B)/2.83V/m, though JA did note that the Volti's highish impedance makes the speaker an easy load for amplifiers. Low and high frequencies are boosted compared to the midrange level, though the treble can be fine-tuned by experimenting with toe-in. Price is for walnut, mahogany, black cherry, or maple veneer. Premium finishes add $1000/pair. (Vol.43 No.8 WWW)

Wilson Audio Yvette: $25,500/pair
Bob Deutsch could never come to grips with the notion of the Yvette as the Sophia's replacement. He preferred to think of it as a smaller Alexandria XLF. He especially praised the "oneness" of the sound—not as in pieces assembled, but as in no pieces at all. Listening to the Yvettes was "like a tug-of-war in which the sound produced by the orchestra and the space surrounding it were compliant and pushing against each other." After trying out some trite audiophile terms, he concluded, "no combination of those qualities could describe what a pair of Yvettes could actually do: push back the line that separates recorded and live music." "Overall," JA wrote, "the Yvette offers good measured performance," while noting the "remarkable" similarity between the Yvette's in-room response and that of the Alexia Series 2. (Vol.42 No.5 WWW)

B (Restricted LF)

DALI Callisto 6 C: $5747/pair with SoundHub, BluOS module
The Callisto 6 C floorstander is a three-way design that contains its own 96kHz DSP system and pairs of 30W class-D amplification. The 6 C speaks to the world via one ribbon supertweeter, one 1.15" soft-dome tweeter, and two 6.5" wood-fiber-impregnated-pulp-cone woofers, the latter reflex loaded. Included with each pair of 6 Cs is the DALI Sound Hub, a smallish box that connects to the speakers with either a 2.4GHz or 5.8GHz Wi-Fi connection, and which itself receives source signals via its analog and digital (S/PDIF and TosLink) inputs, Ethernet, and Bluetooth. The speakers themselves also have analog (RCA) inputs, and digitize all incoming signals at 96kHz. In his listening tests, JA noted low frequencies "with an excellent combination of weight and articulation," a "natural-sounding" midrange, and "good depth" to soundstage reproduction—and his lab tests revealed "good measured performance." (Vol.42 No.9 WWW)

DeVore Fidelity Orangutan O/93: $8400/pair $$$ ★
Made in Brooklyn, New York, the Orangutan O/93 is a two-way floorstanding loudspeaker with a SEAS 1" soft-dome tweeter—the same one used in DeVore's upmarket O/96—and a 10" paper-cone bass/midrange driver. It has a claimed sensitivity of 93dB and a nominal impedance of 10 ohms. The beautifully finished cabinet is made from a combination of Baltic birch plywood and MDF; the front baffle has a distinctive fiddleback mahogany veneer, while the sides, back, and rear are veneered in maple and finished in a semitranslucent gloss-black lacquer. Driving the O/93s with a Unison Research Simply Italy amplifier, ST noted the DeVores' lively, immediate sound: a sweet, extended treble; punchy bass; and a deep, wide soundstage with excellent center fill. In his follow-up, AD praised the O/93 for the physicality of its sound—the sense of touch in robustly played piano trills, the feel of mallet against marimba, the tactile pluck of a double bass—and for its fine overall balance that allowed excellent timbral color from acoustic instruments yet also "gave nearly full weight" to kettledrums. He regards the O/93 as among the best choices for people who appreciate the impact, drama, and thrills of vintage loudspeakers yet whose rooms and budgets require a contemporary speaker of more modest price and size—considered as which, the DeVore is "far better stuff than most everyone else is making." With the O/93s driven by the Linear Tube Audio Z10e amplifier, HR concluded, "I've experienced countless audio components that measured well, but only a rare few that produced authentic tone, nine octaves of natural detail, and copious atmospherics. The LTA Z10e driving the DeVore Orangutan O/93s did all that." In a measurements follow-up, JA estimated the O/93's sensitivity as 90.1dB—slightly lower than the nominal 93dB, yet still, when combined with the speaker's 10 ohm impedance, indicative of a very flea-watt–friendly loudspeaker. (Vol.37 No.1, Vol.38 No.12, Vol.39 No.6, Vol.41 No.5, Vol.42 No.1, Vol.43 No.5 WWW)

Dragonfire Mini Dragon DFA 2.1: $10,000 for the system
The DFA 2.1 system from Dragonfire Acoustics comprises the company's Mini Dragon Satellite planar-magnetic desktop speakers; MD-4 250 Wpc class-D amp, which contains a DSP module for correcting and controlling the speakers; and DFA SB-8P subwoofer, along with a version of the miniDSP SHD headphone amp/streamer (equipped with Dirac Live room-correction software), plus a suite of cables and a calibrated USB microphone. Although Dragonfire published individual prices for all of the above, they really must be used together—especially the speakers and the amp, which cannot perform optimally in isolation from each other. Although JVS found that "setup was not without its challenges" and noted, duly, that the Dragonfire system was designed for "intimate listening where its monitors are precisely aligned to ear height," he remarked that the system's "remarkably transparent, colorful, and detailed full-range sound is musical to the core." JA noted that the system "offers excellent measured performance," but confirmed the for desktops only dictum. (Vol.42 No.9 WWW)

Dynaudio Special Forty: $3499/pair (stands necessary)
Introduced in celebration of the Danish manufacturer's 40th anniversary, Dynaudio's two-way, stand-mounted Special Forty has a 1.1" fabric-dome tweeter with a special (or perhaps even Special) coating, back-loaded with a damped chamber, as well as a 6.7", aluminum-voice-coil woofer whose diaphragm is made of Dynaudio's proprietary magnesium-silicate-polymer (MSP) material. The drivers are crossed over at 2kHz with first-order slopes, and fitted to an enclosure, veneered inside and out, whose large, flared reflex port can be stopped with an easily removable foam plug (supplied) for tuning to the owner's room characteristics. JA used the Special Fortys on 24"-tall stands and reported hearing "a surprisingly solid bass foundation, considering their modest size," and the ability to convincingly play loud rock music. He noted a "top octave [that] was a touch on the mellow side," clean trebles, and "stable, well-defined stereo imaging," but was troubled by some midrange congestion, apparently related to cabinet resonances, that he was able to reduce in level by paying extra attention to the speaker/stand interface. In measuring the Dynaudio, JA found on the cabinet's sidewalls some resonant modes, one of them very strong, and a small, ca 1kHz response peak that proved inaudible. Other than that, he wrote, the Special Forty "offers generally excellent measured performance." (Vol.41 No.9 WWW)

Elac Carina BS243.4: $1379.98/pair (stands necessary) $$$
The standmount BS243.4 loudspeakers—not the snappiest name you're likely to see in this issue—combines a 5.25" aluminum-cone mid-bass driver with a version of the Heil air-motion transformer tweeter that Elac refers to as a Jet Emission Tweeter (JET), crossed over at 2.7kHz. Its 13"-tall enclosure, which is trapezoidal in cross-section, loads the larger of its two drivers with a downfiring reflex port aimed toward the rear. (Designer Andrew Jones says that keeping the speaker 12" from the front wall "is about right in general.") Used on his 24"-tall Sound Anchors Reference stands, HR described the Elacs as capable of "[resolving] supermicro information better than any speaker I know in its price range," describing its overall sound as "refined" and praising in particular its "supersmooth octave-to-octave balance." Upon measuring the Elac, JA suggested that it offers "excellent audio engineering." Tarrifs necessitated a higher price, but still an excellent value. (Vol.43 No.1 WWW)

Falcon Acoustics LS3/5a: $2995/pair (stands necessary) ★
In contrast to a typical ultradamped speaker—which, according to HR, can sound like "a moaning, wheezing pile of wood"—Falcon Acoustics' BBC-licensed LS3/5a delivered "expression, transparency, [and] tonal purity." This true vintage reissue, created in part by the man who oversaw production of the 127mm KEF Bextrene-cone woofer of the 1974 original, went so far as to make HR's own ca-1985 Rogers LS3/5as "sound a tad drowsy and fuzzy" by comparison. In HR's room, the Falcons loved low-powered amps—especially low-powered tube amps, such as the 22Wpc Line Magnetic LM518-IA—but turned up their noses at class-D amplification. In measuring the Falcons, JA went to the well and compared his findings with measurements of earlier LS3/5a iterations. His verdict: Falcon "has resisted the temptation to 'improve' the sound quality, but has also managed to re-create what made the speaker great in the first place." In 2019, AD described the Falcons as offering "greater openness and air" than other LS3/5a's of his recent experience. (Vol.38 No.8, Vol.42 No.7 WWW)

GoldenEar BRX: $1599/pair (stands necessary)
The final loudspeaker to be introduced by GoldenEar while Sandy Gross was still with the company he cofounded, the immaculate-looking BRX (for Bookshelf Reference X) marries the flagship Triton Reference's HVFR (High-Velocity Folded Ribbon) tweeter and 6" polypropylene-cone upper-bass/midrange driver to a pair of 6.5" planar passive radiators. The optimal listening axis is just below the tweeter, so JA used 30" Sanus SF30 twin-pillar stands to get the best sound. The result is superb stereo imaging accuracy and uncolored, natural-sounding midrange and treble with the grilles, but a touch too much mid-treble energy without them. Excellent low-frequency extension, to 50Hz, for such a small speaker, JA found, with fleshed-out upper bass even with the BRXes used well away from the wall behind them. Measured sensitivity was 87.5dB(B)/2.83V/m compared with the specified 90dB. "While it benefits from being powered by high-quality amplification, its sound quality features an uncolored midrange, clean high frequencies, and enough mid- and upper-bass energy to satisfy, coupled with stable, accurate stereo imaging," he concluded. However, he warned that despite its impedance being specified as "compatible with 8 ohms," the BRX will perform best with substantial amplifier power. (Vol.43 No.9 WWW)

Graham Audio LS3/5: $2990/pair (stands necessary) Graham Audio Chartwell LS3/5a: $2990/pair (stands necessary)
Graham Audio of Newton Abbot, UK, is the twelfth and most recent manufacturer to bring to market a BBC-approved LS3/5a minimonitor, and they are doing so under the historic brand name Chartwell. Their version has the same specs as the 1987-2000 version, including an 11 ohm nominal impedance, plus bespoke drivers engineered for Graham by Derek Hughes. Alongside their LS3/5a, Graham also produces the sole commercial version of the BBC's original LS3/5, a 15 ohm speaker that differs from the a in some key respects, and whose drivers were also engineered by Hughes. AD has now tried both, in tandem with a pair of 24" tall Gig Harbor Audio stands ($599/pair), and found both to be explicit, well-balanced, and generously musical. Although he appreciated the somewhat richer-sounding LS3/5's, AD noted a preference for the Graham/Chartwell LS3/5a's. (Vol.42 No.7 WWW)

Harbeth HL-P3XD: $3295/pair (stands necessary) ★
In its standard version, the two-way, sealed-cabinet P3ESR ($2195/pair) stands just 12" tall and partners a 0.75" tweeter with a 5" woofer, the latter using Harbeth's proprietary, patented Radial2 polymer for improved clarity and low-level resolution. Though restricted in loudness and bass extension, the P3ESR had a slightly warm overall balance characterized by smooth highs, an uncolored midrange, and stable and accurate stereo imaging. "The Harbeth P3ESR is the best iteration yet from any manufacturer of the BBC LS3/5A minimonitor concept," concluded JA. The littlest Harbeth also gets the strongest recommendation from JM. While its lack of low and midbass disqualified it for most rock and large-scale orchestral performances, felt BD, the Harbeth's incredible midrange clarity and detail made it an outstanding choice for small, intimate works. The 40th Anniversary Edition, which adds upgraded connectors, internal cable, and crossover capacitors, as well as an exclusive olivewood veneer and two commemorative badges, found favor with HR: Used on TonTrÑger P3 stands ($1485/pair) and compared to the standard P3ESRs, the 40th Anniversary Edition Harbeths showed him "greater separation of instruments, and a fleshier texture to [Birgit] Nilsson's voice." Herb regards the 40th Anniversary Edition P3ESR as "the best-built, most natural-sounding small speaker I have ever heard, and considers the prices of both versions "chickenfeed." (Vol.33 Nos.8 & 10, Vol.34 No.7, Vol.41 No.12 WWW)

KEF LSX Wireless: $1250/pair $$$
Similar in appearance to the well-received KEF LS50 standmount, the LSX is a wireless amplified loudspeaker system that gets its signal via Bluetooth or dual-band WiFi; alternatively the LSXes can be hardwired to the user's router via an Ethernet cable, or to an alternate source via Toslink optical or a 3.5mm line-level analog jack. The speaker itself is built around a variant of KEF's tried and true Uni-Q dual-coaxial driver, installed within a molded bass-reflex enclosure that also contains DACs, preamps, and class-D amplifiers; most of said enclosure is covered in a high-tech fabric, available in a variety of colors. According to HR, "Fine detail and sharply focused images were the most conspicuous aspects of the LSX system's sound," while "lack of force and dynamic expression" were its prime failings. JA was impressed by the LSX's measured performance, noting its "astonishingly flat" farfield response. In a Follow-Up, JA described his at-home listening impressions, noting "sweet-sounding top octaves" and "stable, accurate stereo imaging." (Vol.42 Nos.5 & 6 WWW)

Legacy Studio HD: $1795/pair (stands necessary)
The Studio HD is a 13"-tall, reflex-loaded minimonitor with an 8" woven (silver threads among the graphite) woofer and a 1" folded-ribbon tweeter, built into a tapered, faceted cabinet of MDF. Each Studio HD has two pairs of binding posts, for biwiring/biamplifying, and two two-position toggle switches that let the user run either or both drivers flat or with 2dB of attenuation. Used on 24"-hgh Sound Anchor stands—which, in this context, HR preferred to his less massive TonTrÑgers—and driven with a Pass Laboratories solid-state amp, the review pair exhibited an elevated presence region, prompting Herb to note that male voices seemed "thin and lacking in growl and testosterone." The Legacies succeeded in reproducing "the momentum and intense artistry of [violinist] Hilary Hahn's playing, but diminished her violin's rich tones and unique textures." Tube amplification made for "a more physically attractive sonic presentation," while the class-D Bel Canto e.One REF600M monoblocks drew from the Legacies "fuller, tighter" bass and restored testosterone to voices. Ultimately, at their best, the Studio HDs rewarded Herb with "spirited liveliness" and good musical timing. In measuring the Studio HD, JA found it a somewhat demanding load, and expressed puzzlement over its unusual and ultimately underdamped bass alignment. Premium finishes add $185/pair; "exotic" finishes add $300/pair. (Vol.41 No.10 WWW)

Magnepan LRS: $650/pair $$$
Introduced as a replacement for the long-running MMG planar-magnetic speaker, Magnepan's new LRS—it stands for Little Ribbon Speaker—is a low-sensitivity (86dB) low-impedance (nominally 4 ohms) quasi-ribbon panel speaker that stands 46" tall and is, like its successful predecessor, only sold direct. HR found that the "slender and elegantly finished" LRS required a great deal of setup effort, especially when it came to dialing-in just the right amount of toe-in. But once he got there, he found that the new speaker's "levels of microscopic detail, accurate timbre, and pure-water transparency are unprecedented at anywhere near $650/pair"—although he also noted that the 20% larger Magnepan .7 "played a lot bigger than the LRS." In measuring the LRS, JA discovered "sensitivity [that] was almost 6dB lower than specified," yet he pronounced the LRS "capable of good sound , provided its owner takes care in optimizing such matters as placement and toe-in." (Vol.42 No.8 WWW)

Piega Premium Wireless 701: $7495/pair
This slim, Swiss-made, two-and-a-half-way active tower features an enclosure extruded from a single piece of solid aircraft-grade aluminum. A ribbon tweeter is mounted above two 5.5" drivers, the lower of which rolls off earlier than the upper. As the name suggests, the Piega Wireless 701 uses a proprietary Wi-Fi connection to receive signals from the Connect control unit—a choice of three RF frequencies and corresponding data rates is offered—though it also has a line-level analog input feeding an A/D converter. The Connect has both analog and digital inputs (the latter with aptX Bluetooth) and allows the speaker's volume to be controlled. DSP is used to implement the speaker's crossover, adjust low frequencies to suit the room acoustics, prevent woofer overload, and provide loudness compensation. JMu was impressed by what she heard from this system, which sounded "bigger than you'd expect from these slender speakers. Bass extension and control were impressive. Music from the 701s filled my room, and the spaciousness of the sound suggested wide, even dispersion. Tonal balance remained fairly neutral, and familiar music sounded like it should. Hi-hat cymbals were smoothly reproduced, without detectable resonance or ringing." Despite the system offering generally respectable acoustic performance, JA found some anomalies on the test bench. Though the Connect would lock to a 192kHz datastream, it appeared to downsample that rate to 96kHz. In addition, the Wi-Fi connection between the Connect and the loudspeakers appeared to be limited to a 48kHz sample rate, higher rates being downsampled. Systems sold in the US include the Connect control unit. (Vol.43 No.8 WWW)

Polk Audio Legend L100: $1199/pair (stands necessary)
See KM's review in this issue.

ProAc Response D2R: $4500/pair (stands necessary)
The D2R is derived from the Response D Two that JM and JA reviewed in 2010. It keeps the original's reflex-loaded, 6.5" glass-fiber–cone woofer but replaces the D Two's 1" silk-dome tweeter with a 2.75" ribbon tweeter made by ProAc. "The D2R impressed me immediately with its lucid, clear top end, rich-sounding midrange, and, for a cabinet of its size, well-defined and extended bass," KM wrote. Although JA's measurements indicated that the tweeter's top-octave output was 3–5dB too high in level compared with the average level of the woofer, KM never experienced the speaker's ribbon tweeter as forward, bright, or mechanical sounding, writing that the D2R was "open and natural sounding in the treble, reproducing the tone, texture, and sizes of pianos, percussion—and cymbals." MF concluded that "the ProAc D2R demonstrated excellent transparency . . . When called for by the recording, it delivered rich, characterful midrange sounds and deep, well-defined bass notes." (Vol.43 No.4 WWW)

Quad S-2: $1195/pair $$$ (stands necessary)
Like Quad's very first loudspeaker, which bowed in 1949, their newest is not an electrostatic panel; rather, the Quad S-2 is a stand-mounted minimonitor in which a reflex-loaded 5" Kevlar mid/bass driver hands off to a 1.75"-long ribbon tweeter, the moving element of which is given extra strength by a very thin deposition of polycarbonate. The 13" by 7.1" by 10.25" (HWD) cabinet, which incorporates a rear-firing reflex port, is made of MDF sheets with rounded corners and rolled edges, and comes in a natural Sapele Mahogany veneer (black oak, Piano White, and Piano Black are also available). Used on 24"-tall steel stands, a pair of S-2s impressed KM by allowing large-ensemble jazz to sound "very big, very dynamic, and very extended." KM heard levels of purity and clarity he'd never heard from traditional dome tweeters—the S-2s "sometimes sounded literally incandescent"—as well as an ability to reproduce "richly tonal electric-bass notes, delivered with fine texture and copious weight." But to do all that, the Quads required a bit more than the 20Wpc offered by his Shindo Haut-Brion amp: "To hit their stride, I would guess the Quad S-2s require power in the 45–65Wpc range." Writing from his test bench, JA confirmed the Quad's 87dB sensitivity but noted some panel resonances—ultimately inaudible, it seems—as well as a "somewhat underdamped" woofer alignment. The Quad's cumulative spectral-decay plot on its tweeter axis was "superbly clean," correlating with the speaker's high perceived purity and clarity. (Vol.41 No.1 WWW)

Rogers LS3/5a (2020): $3350/pair (stands necessary)
This new version of the legendary British sealed-box minimonitor from the 1970s adheres to the pre-1987 BBC specification, including a 15 ohm nominal impedance, a 19mm tweeter with a doped Mylar dome, and a 110mm woofer with a doped-Bextrene cone. These drive-units were reverse-engineered by ex-Exposure and Audio Note engineer Andy Whittle. "Rest assured, here was that LS3/5a explicitness at its smoothest and easiest to take," AD wrote. "There was no sonic edge tagging along with those crisply realistic and perfectly aligned note attacks," he added, though he did find that the new speaker wasn't kind to typically overcooked contemporary digital pop recordings. Summing up, AD wrote that "the Rogers LS3/5a served up a convincing illusion of extended low-frequency response." (Vol.43 No.4 WWW)

Sonus Faber Olympica Nova I: $6500/pair
The new Olympica Nova 1 is a two-way standmounter with a 5.9" pulp-sandwich-cone midbass driver and a 1.1" silk-dome tweeter. The former is reflex loaded with a vertically aligned slot on the rear of the speaker's non-symmetrical cabinet, the walls of which are formed from eight thin, crossgrain-oriented layers of wood bonded together under high pressure. Sonus Faber's recommended stands—used in our review—are 27" tall and cost an additional $1200/pair. With the Olympica Nova 1s in his system, LG heard clean response down to only 40Hz, yet he also noted the speakers' "rich, warm tone" and "considerable heft" on some recordings. In particular, Larry found that "imaging was the Nova 1's strength." Writing from his test bench, JA found a resonant mode in the cabinetry and some midrange peaks in the reflex port's output, noting that the newest Sonus Faber otherwise "did well on the test bench." (Vol.43 No.3 WWW)

Tekton Design Impact Monitor: $2000/pair (stands necessary)
Like all of Tekton's loudspeakers, the stand-mounted Impact Monitor uses multiple 1" fabric-dome tweeters—in this case, seven—in a circular arrangement the company calls a "polycell array." Here, that array handles frequencies above 1kHz, yet when it receives frequencies whose wavelengths are smaller than the quarter-wavelength associated with the distance between any two tweeters, that frequency is handed over to only the centermost tweeter, thus minimizing acoustical comb-filter effects. Frequencies below 1kHz are handled by two 6.5" woofers whose lightweight pulp cones include papyrus fibers to enhance rigidity. The reflex-loaded enclosures are 24.5" tall; grilles are a $50/pair option. In his relatively small listening room, HR found that the Tektons produced excessive bass when placed too close to the front wall, yet did not reward nearfield listening. His solution was to stuff their reflex ports with resistive elements—socks, actually—after which the Impact Monitors delivered more measured bass response, fine imaging and saturation of tone, and, despite Herb's apprehensions regarding their multiple tweeters, "surprising amounts of well-focused detail." HR wrote that the Tektons' best feature was their ability "to grab and hold my attention"; he praised them as "all-rounders" that suited every musical genre he threw at them. In measuring the Impact Monitor, JA observed a significantly lower-than-specified sensitivity—87.5 vs 94dB—but noted that, in terms of impedance, the speaker is "a relatively easy load." Pointing to its "superbly even on-axis response," JA concluded that "this unusual design is not compromised." (Vol.41 No.8 WWW)

Totem Signature One: $2895/pair (stands necessary)
Essentially a modern take on the company's groundbreaking Model 1 loudspeaker of the late 1980s, the Totem Signature One is both bigger than its forebear—its cellulose-acrylic-cone woofer is itself as large in diameter as the Model 1's cabinet was wide—and twice as heavy. Joining that 6.5" woofer, which is reflex-loaded by a rear-firing port, is a 1" SEAS tweeter with a dome of aluminum-titanium alloy, rear-loaded with a chamber of its own. The veneered cabinet is made from ¾"-thick MDF with lock-miter joints, and its interior surfaces are both veneered (for stability) and coated with a borosilicate-loaded damping compound. After devoting considerable time to optimizing the Totems' positions in the room, HR was particularly impressed with their bass performance: "If a small loudspeaker like the Totem Signature One can deliver a little power and scale from pipe-organ recordings, as it did . . . and if it can make [bassist Charlie] Haden's notes unique in a noticeable way, that is all the bass power and quality I require." HR also praised the Signature Ones' imaging as "a special joy," but felt that comparable bookshelf speakers offer better "texture, transparency, and tone," the Totems on occasion seeming "a little thin" by comparison—yet, by the end of the review period, more setup work yielded "improved instrumental corporeality." In measuring the Signature One, JA noted lower-than-specified sensitivity—83.5 vs 87dB—as well as cabinet and, especially, reflex-port resonances. Otherwise, the Signature One "measured better than its predecessors." (Vol.41 No.1 WWW)

Totem Skylight: $1000/pair (stands necessary)
This small two-way design uses a 1" soft-dome tweeter and a long-throw 5.75" woofer in a rear-ported cabinet. The minimal crossover leads to significant overlap between the drivers, which makes listening axis critical; RS found that the stand used needs to place the tweeter just above the listener's ears, which was confirmed by JA's measurements. RS also found that the Skylight needs to be placed close to the wall behind it to flesh out its low frequencies. Once optimally set up, the Totem produced "an illumined clarity in the midband that seemed to accentuate the colors and shapes of the sounds within it" but without sounding etched or fatiguing. In summing up his experience of the Skylights, RS wrote that it was "their combination of midband clarity and sense of rhythm and drive" that impressed him. The Skylight fared less well on the test bench, where the sensitivity was 2.6dB lower than the specified 88dB. The measurements also revealed a high-amplitude port resonance in the upper midrange as well as some significant panel resonances. Measurements call for Class C; JCA awards Class B due to RS's enthusiastic assessment. (Vol.43 No.6 WWW)

Vanatoo Transparent One Encore: $599/pair in black or cherry veneer
The Transparent One Encore is an active speaker system in which all electronics are housed in one of its two MDF speaker enclosures. Each speaker has a 1" aluminum-dome tweeter, a 5.25" aluminum-dome woofer, and a rear-firing 5.25" passive radiator, while a four-channel class-D amp provides 100W each for the woofers an 20W each for the tweeters. A 24-bit, 48kHz processor performs all DSP/crossover chores and accepts incoming signals up to 24/96, while analog inputs are digitized by a separate DAC. Wireless inputs are via Bluetooth SBC and aptX. After using the Vanatoo system with his MacBook Pro and an upgraded (putting it mildly) Nordost Valhalla 2 USB cable, JVS suggested that the Transparent One Encore "will likely shatter your expectations of what a $599 powered loudspeaker can deliver"—a level of enthusiasm supported by the conclusion JA dispatched from his test bench: "excellent measured performance." (Vol.42 No.7 WWW)

Wharfedale Linton Heritage: $1498/pair with stands $$$
Wharfedale's Linton Heritage, released as part of an extended observance of the company's 85th anniversary, is a three-way reflex-loaded standmount in a veneered chipboard/MDF enclosure; its $1498/pair price includes 17" tall steel-and-wood stands. Drivers include an 8" woven Kevlar woofer, a 5" woven-Kevlar midrange driver, and a 1" soft-some tweeter whose position on the Linton Heritage's unapologetically wide baffle is slightly offset. (The speakers are handed.) HR heard from the Wharfedales "a slight bass overhang," but also "voice intelligibility [that] was exceptional." Yet at the end of the day it was the Linton Heritage's consistent musicality that won him over: Comparing to the popular and similarly priced KEF LS50s, he wrote, "The KEFs play the sounds well, while the Wharfedales play the songs well." JA's measurements uncovered sensitivity (88.1dB) that was slightly higher than average (if slightly less than specified), and praised the Wharfedales' "excellent measured performance." (Vol.42 No.9 WWW)

Zu Audio Soul Supreme: $4499/pair and up, depending on finish ★
As HR was advised before reviewing Zu's Soul Supreme, "this is not your normal two-drivers-in-a-ported-MDF-box loudspeaker." Indeed, the Soul Supreme mates a 10.3" full-range driver, complete with whizzer cone, to a tweeter comprising a Radian compression driver loaded with an aluminum-alloy horn that stands proud of the 37.7"-tall cabinet. Bass extension and impact are maximized by the company's Zu-Griewe loading technology, the crossover is as minimal as can be, and the overall system sensitivity is specified at 97dB with a tube-friendly 16 ohm nominal impedance. HR's listening notes point to the Soul Supreme's vivid microtextures, exceptional musical flow and viscosity, and massive and abundant dynamic slam. His conclusions: "These speakers represent what I value in audio engineering. These speakers get me and I get these speakers! Highly recommended; high Class B." JA's measurements uncovered significantly lower sensitivity than advertised (a still-high 91dB instead of 97dB) but portrayed the Soul Supreme as "a very easy load." And while JA noted some wrinkles in the Zu's cumulative spectral-decay plot, these were not as audible as he'd expected: "I enjoyed the afternoon I spent listening to the speakers in Herb's system." (Vol.39 No.7, Vol.43 No.5 WWW)

C (Full-Range)

Emotiva Airmotiv T2+: $999/pair
The largest loudspeaker in Emotiva's Airmotiv line, the T2 is a three-way floorstander built around two reflex-loaded 8" woven-fiber-cone woofers, a 5.25" woven-fiber-cone midrange drive, and a 1.25"-long ribbon tweeter. The 42"-tall enclosure is made of HDF, painted satin black. With a pair of T2s installed in his listening room, TJN reported sound that was "clear and open, with impressive depth," although he found its bass performance to be "notably tight but not consistently powerful." In measuring the T2, JA observed that the speaker came close to meeting its high (91dB) sensitivity spec, but also noted load characteristics that indicate the need for a low-impedance-friendly amp. (Vol.42 No.5 WWW)

JBL Stage 170: $499.99/pair $$$
Measuring a little over 3' tall and a mere 7.5" wide, this slender floorstander uses a combination horn/waveguide for its 1" aluminum-dome tweeter. Below that are two 5.25" Polycellulose-cone mid-woofers, one crossed over at 2.8kHz and the other at 1.8kHz: The Stage A170 is a 2.5-way design. On the rear of its vinyl-clad cabinet are two reflex ports, and two pairs of loudspeaker connectors to facilitate biwiring. Key specs include a 6 ohm impedance and a sensitivity of 89dB. According to HR, the JBLs weren't at all fussy when it came to intricacies of setup and projected "an enormous, nicely detailed soundstage." On rock fare, and apart from slightly rounding-off leading-edge transients, the JBLs offered "relatively unrestricted" dynamics and allowed music to roll forward "with ridiculous ease." Writing from his test bench, JA confirmed the speaker's above-average sensitivity and praised the Stage A170's "excellent measured performance, especially considering its affordable price." (Vol.42 No.11 WWW)

Klipsch Forte III: $3998/pair
The rare Klipsch "heritage" product to have seen an interruption in its production, the Forte has been revived as the Forte III: a three-way floorstander with horn-loaded compression drivers for the high and mid frequencies and a 12" treated-paper-cone woofer loaded not with a reflex port but with a rear-mounted 15" passive radiator. Specs include a sensitivity of 99dB and an impedance described as "8 ohms compatible." KM, who described the Forte III as "the most amplifier-sensitive loudspeaker I've reviewed," found it to cast "an immersive soundstage" in which instrumental ensembles sounded "fully alive," and praised it for its freedom from "boxy, shouty, or spitty upper-frequency colorations." Technical Editor JA found the Klipsch's sensitivity to be 95.2dB—lower than spec though considerably higher than average—but impedance characteristics that suggest the need for an amp that's comfortable driving 4-ohm loads. (Vol.42 No.8 WWW)

NEAT Acoustics Iota Alpha: $1995/pair
The newest NEAT confounds expectations: Though the size of a stand-mounted speaker at 17.6" tall, the Iota Alpha is intended to be used as a floorstander with its angled upper baffle aimed upward, toward the listener. The Iota Alpha also confounds the expectations of those who assume that two drivers on that baffle—a 2"-long ribbon tweeter and a 4" midrange driver—are the only ones in play: Also contributing to the claimed 33Hz—22kHz frequency response is a reflex-loaded, downward-firing 5.5" woofer on the cabinet's bottom panel, raised above the floor by four spiked feet. Evaluating the smallish NEAT floorstanders in his smallish apartment, KM had particular praise for their "fully present, tactile, and meaty sound," with instrumental tones that were "rich and saturated for such small speakers," and with scale, pacing, and dynamics that were "as accurate and thrilling . . . as I've heard." Writing from his test bench, JA noted lower-than-specified sensitivity (83dB vs 86dB), reflex-port response peaks at multiple frequencies, a response peak at 3kHz, and other wrinkles, all prompting him to say that he was "disappointed in its measured performance." Writing from his Bed-Stuy bothy, HR told of conquering his initial placement difficulties and ultimately wringing from the NEATs sound that was "always smooth and outgoing" and "did pace, rhythm, and timing better than most," though he noted that "clarity of aural image was not a strong point" of the Iota Alphas. Grilles now included in price. (Vol.40 Nos.2 & 6 WWW)

Rethm Maarga: $10,750/pair
As with all of Rethm's loudspeakers, the third and most recent version of their midline Maarga combines a single high-sensitivity paper-cone driver with an enclosure built using large-diameter fiberglass pipes. In place of the UK-built Lowther drivers used in earlier Rethms, this Maarga uses a proprietary paper-cone driver, albeit one whose resemblance to their British forebears is unmistakable, supplemented in the lowest octaves by two isobarically loaded 6" x 9" drivers powered by an onboard class-D amp. After hurdling a technical problem with his early-production review samples, AD heard from the Rethms a pleasantly open sound with excellent temporal performance: "Music was rhythmically involving, and there were no dragging tempi." He also heard "superior" spatial performance and decent if not astonishingly weighty bass—plus very good drivability by low-power amps. Technical Editor JA noted a dearth of energy between 200Hz and 800Hz but lauded Rethm's success at creating a high-efficiency (mostly) single-driver loudspeaker. High Class C. (Vol.43 No.3 WWW)

C (Restricted LF)

Audio Physic Step Plus: $2695/pair and up, depending on finish
The latest iteration of Audio Physic's stand-mounted Step loudspeaker—a mid-1990s success whose notoriously narrow baffle contributed to its very good spatial performance—the Step Plus mates a 1.75" tweeter with as a 5.9" mid-woofer, the latter reflex-loaded with a rear-mounted port. Both drivers are designed in Germany and made in China, and both feature aluminum cones that are given a ceramic coating said to prevent "partial oscillations." KM noted that the Step Pluses delivered their best spatial performance when placed away from the wall behind them and directly toed-in toward the listening seat—after which they "shock[ed] me with [their] ability to completely 'disappear'." But upon measuring the Step Plus, JA observed that its drive-units are out of phase in the speaker's crossover region, creating an on-axis suckout; he concluded that its measured performance "suggests less-than-optimal engineering." In a Follow-Up report, JA listened to the Audio Physics in his own room, noting that "low frequencies [were] indeed on the lightweight side," but that the above-mentioned suckout "won't become a problem" as long as the speakers are placed with their tweeters "sufficiently below the listener's ear height." (Vol.42 Nos.2 & 4; WWW)

Fyne Audio F301: $425/pair (stands necessary)
Fyne Audio was founded by a group of former senior managers from Tannoy. The two-way, ported F301—the company's second-least-expensive speaker—marries a 1" polyester-dome tweeter to a 6" matte-silver–finished, "multi-fibre"–cone woofer. "After a break-in period," KM wrote, "the Fyne F301s impressed with their exceptional rendering of soundstage width and depth, reasonably wide dynamic range, extended low end (for their size), and exuberant, I-can't-stop-spinning-records presentation." He did note, however, that though it "tilted toward the dark side," the F301's treble could sometimes have a tinge of dryness or hardness on brass and strings. Even so, KM concluded that "the Fyne Audio F301 loudspeakers punch way above their price point. Their ability to cast a wide, deep soundstage with super imaging was as good as any bookshelf speaker I've had in house. Their serious jump factor and meaty bass frequencies were a consistent treat." JA's measurements indicated that while the F301's sensitivity was almost 3dB lower than the specified 89dB/2.83V/m, the F301 is a relatively easy load for the partnering amplifier. (Vol.43 No.5 WWW)

KEF Q350: $700/pair (stands necessary)
Outwardly similar to KEF's considerably more expensive LS50 stand-mount speaker (see elsewhere in Recommended Components), the Q350 is actually a bit bigger overall, with a slightly larger version of KEF's signature Uni-Q coincident driver array that has a 6.5" woofer cone instead of the LS50's 5.25" cone. The Q350 is also slightly more sensitive—87dB vs 85dB—and its crossover network is characterized by gentler filter slopes and, concomitantly, a lower parts count. Although HR preferred various aspects of the performance of the more expensive KEF—in particular its "more forceful and detailed" bass and its "balanced purity"—he found himself admiring the Q350s for their "above-average force and texture" and their lively, open, consistently "direct" sound. Herb's conclusion said it all: "Early in this review process I realized that KEF's Q350 is not the poor person's LS50, but has a unique goodness of its own." JA's measurements supported that: "Its rather lively enclosure apart, KEF's Q350 offers excellent measured performance." (Vol.41 No.3 WWW)

Klipsch RP-600M: $549/pair (stands necessary) $$$
Klipsch's two-way standmounted RP-600M uses a 6.5" spun-copper-plus-ceramic-cone woofer to handle frequencies below 1.8kHz and a 1" titanium-diaphragm tweeter loaded with a Tractrix horn to reproduce everything else, the latter presumably contributing to a specified 96dB sensitivity. In his listening room, HR used a pair of them on 24" Sound Anchor stands and found that proximity to the wall behind them influenced both tonal balance and perceived soundstage depth, finding 3' to be the best compromise. He also noted the speaker's "extraordinary job of emphasizing the beat [and] diagramming the melody" of classical music and the Klipsch's "ability to play really loud" with even an 8W amplifier. The verdict: "Not just a great loudspeaker for its price, or for horn-loving Klipsch Kids—it's way better than that. Super-highly recommended." Reporting from his lab, JA estimated the RP-600M's sensitivity to be 89.6db—"much lower" than Klipsch's spec—but otherwise praised its "impressive measured performance, especially when its affordable price is taken into account." (Vol.42 No.4 WWW)

Magnepan .7: $1450/pair $$$ ★
Magnepan's .7 planar-magnetic or "quasi-ribbon" loudspeaker is a two-way panel design that measures just over 54" high and 15" wide. The manufacturer's specs include a 4-ohm nominal impedance, sensitivity of 86dB, and bass extension down to 45Hz. Used on their own, especially when driven by Rogue Audio's 100Wpc Sphinx integrated amplifier ($1295), the .7s delighted HR with their "microdetail, transient attack, transparency, and soundstaging," but could also sound "a little bass shy." But when augmented with a pair of Magnepan's DWM bass panels ($795 each), the combination of .7 speakers and Sphinx amp delivered "disarmingly big, robust, vivid, and extremely tactile" sound with plentiful, "authentically toned" bass. "These Maggies did slam," HR declared, adding that he'd never enjoyed Led Zeppelin II more than through this system. Class B, felt HR; Class C decided JA, following his auditioning. (Vol.38 No.8 WWW)

PSB Alpha 5: $399/pair (stands necessary) $$$
A descendent of the original PSB Alpha, which in 1992 sold for $199/pair, the 11.375"-tall Alpha P5 mates a 0.75" aluminum-dome tweeter with a 5.25 polypropylene-cone woofer, aligned with the latter above the former. A 2" diameter reflex port is mounted to the all-MDF enclosure's rear panel, above a single pair of binding posts. Used on 24" stands and driven with amps both cheap and dear, the Alpha P5s impressed JA with low midrange coloration—"[they] did well with both male and female spoken voices"—and "sufficient upper bass weight" from well-recorded double bass. (Perhaps needless to say, low bass is absent.) The PSBs had less-well-defined imaging than the KEF LS50 ($1300/pair) but overall JA found them to do "relatively well in comparison" with that and another more expensive speaker. Writing from his test bench, JA praised the PSB's "excellent measured performance." (Vol.42 No.10 WWW)

Tannoy Revolution XT 6: $1000/pair (stands necessary)
This elegant-looking speaker uses a version of Tannoy's Dual Concentric drive-unit, where a "Linear PEI" (polyetherimide) dome tweeter is mounted at the apex of the 6" woofer's cone. The trapezoidal enclosure is separated from a 1"-thick plastic plinth by four 0.5"-high chrome-finished plastic spacers that allow the XT 6's bottom-firing port to breathe. HR initially found the XT 6's low frequencies MIA, but three full days of playing music and trying different amplifiers mostly brought them back. "My gut feeling is that these coaxial drivers require at least 30W to sing and 100W to dance," he wrote. The XT 6 offered the best voice intelligibility HR had heard from a box speaker on a stand, though he did comment on "a slight gray haze in the lower treble that reduced contrast and transparency." JA was bothered by an audible excess of energy in the presence region. However, HR concluded that the XT 6 has "a sensuous, flirty, seductive side that makes me want to smile, and dream, and listen to one record after another." On the test bench, the measured sensitivity confirmed Tannoy's 89dB specification, though the shape of the impedance magnitude graph suggests that the XT 6's treble will be exaggerated with tube amplifiers that have high output impedances. Even with a solid-state amplifier, the Tannoy's tweeter appears to be balanced 3–5dB too high in level. Price is for dark walnut or medium oak. Black or white finish adds $50/pair. (Vol.43 No.7 WWW)

Trenner & Friedl Osiris: $8500/pair
These small, swept-back towers took a long time to break in and proved hard to set up in KM's room. He also found it sensitive to amplifier matching. But after he put in that work, he heard "clarity, detail, and naturalness" that "competed with every speaker" he has ever reviewed, even if the balance was on the dark side of natural, though without being warm. For such a small speaker, he found, they played big music with force: "Through the Osirises, Die Walküre was intense and powerful." JA's measurements, on the other hand, found limited anechoic low-frequency output, the speakers rolling off fast below 50Hz and lacking the usual bass bump resulting from the nearfield measurement technique—an indication that the bass level is even lower than it looks. He concluded, "this loudspeaker's measured performance suggests that the unusual design approach has introduced problems that have not been fully resolved." (Vol.42 No.11 WWW)

Wharfedale Diamond 11.2: $499/pair (stands necessary)
The largest of three bookshelf speakers in Wharfedale's range of eight Diamond 11 models, the 11.2 combines a 1" fabric-dome tweeter with a 6.5" Kevlar mid/woofer, the latter reflex loaded. The 14"-tall enclosure is multilayer MDF, its reflex port a slot with an opening shaped to linearize airflow. With the Diamond 11.2s on 24" stands and held still with dabs of Blu-Tack (the speakers, not the reviewer), JA noted "a rather warm tonal balance, which was particularly noticeable with male speaking voices." And although the Wharfedales "added useful weight" to some recordings—a surprising amount for their small size—double-bass tone "lacked body." Yet, as JA also noted, when the Wharfedales' very low price is taken into consideration, such perfectionist quibbles fall by the wayside: "the Diamond 11.2s gave me enough of what I needed." Donning his measurer-in-chief hat, JA wrote that, while the Diamond 11.2 is slightly more sensitive than specified—89 rather than 88dB—its impedance curve is such that "amplifiers that are comfortable with 4 ohm loads" are recommended. In all, JA found measured performance that was "excellent, especially considering its affordable price." (Vol.41 No.12 WWW)

D

Audioengine A2+: $249/pair $$$ (stands optional) ★
At the end of 2013, Audioengine replaced the A2 ($199/pair) with the A2+, the only apparent differences being that the latter costs $50/pair more and, per JA, "adds to the left, master speaker a USB 1.1 input for digital audio and a pair of output jacks, used to feed an unfiltered, unequalized signal to the subwoofer(s)." JA compared the new speaker with its predecessor, confirmed that they sounded "identical," and added, "I was impressed by how well these tiny speakers managed to fill my listening room with sound." His new measurements noted that "the A2+'s farfield response . . . is identical to the A2's." He concluded, "A heck of a speaker at a heck of a price!" (Vol.37 No.9, Vol.38 No.4 WWW)

Deletions
Revel Ultima Studio2, no longer available. Auditorium 23 Hommage Cinema, Focal Sopra #3, GoldenEar Technology Triton Two+, Marten Coltrane, Monitor Audio Platinum PL300 II, Volti Audio Rival not auditioned in a long time.

COMMENTS
partain's picture

I can't stand it !
Please review the new & improved KEF LS50s.
The things I've read are titillating , to say the least.

John Atkinson's picture
partain wrote:
Please review the new & improved KEF LS50s.

There is a pair of the new KEF LS50 Meta on its way to me.

John Atkinson
Technical Editor, Stereophile

Link's picture

Awesome, looking forward to the review. Wireless or passive? Just curious what to expect. Thanks.

John Atkinson's picture
Link wrote:
Awesome, looking forward to the review. Wireless or passive?

Passive.

John Atkinson
Technical Editor, Stereophile

rk11's picture

Auditioned the KEF R3s, Polk Legend L200s and the KEF LS 50 Metas a few days ago with 5 tracks of my choosing and thus far my rank ordering of these speakers is as noted. Personally, I found the Metas a bit bright and their bass response was the most lacking - not surprising given the size of the speaker cabinet. Never been a fan of the Polk speakers till the Legend series. The 200s were every bit as good as the R3s EXCEPT in the vocals. I am sure that JA's review will be under a much better controlled environment.

Shangri-La's picture

In the written review, the Ares II was preferred over the Chord Qutest. Yet the Qutest is rated Class A and Ares II is Class B. Interesting...

LinearTracker's picture

BD gave the Duo an “A” rating and deservedly so, but I am listening to the new Duo with the linear power supply and believe it to be a game changer.
I hope to see an update soon.

Link's picture

I have been able to compare the BRXs to a true class A speaker in my system, and I do now agree with the class B rating. Thanks again for the great reviews.

Glotz's picture

with explanation...

Link's picture

Comparisons having been done, the BRXs are nothing to shake a 1M interconnect at. Although they are not quite up there in terms of transparency, detail, and air - they sure do get the timbre, neutrality, and imaging right.

thyname's picture

You butchered the name of T+A MP 3100 HV. Please fix it. There is no such thing as “ T+A MD 3001 HD SACD/CD player: $21,000”

Robin Landseadel's picture

The "A" rated Sennheiser HD 650 headphones have been reissued at a lower price [with a couple of changes that don't affect the sound] as the Drop HD 6XX. Drop is an online only operation, sells for $220 + shipping & tax. It's one of the cheapskate audio high points of the season along with Topping Headphone amps and DACS.

X