Audio Skies Michael Vamos - YG Acoustics, JMF Audio, Ideon at Capital Audiofest 2025
The Listening Room and Fidelity Imports - Diptyque DP-160 Mk.2 at Capital Audiofest 2025
Fidelity Imports Audia Flight and Perlisten System
Fidelity Imports Wilson Benesch and Audia Flight System at Capital Audiofest 2025
J Sikora Aspire, Innuos Stream 3, Aurender N50, Gryphon Antileon Revelation, Command Performance AV
Bella Sound Kalalau Preamplifier: Interview with Mike Vice
BorderPatrol Zola DAC – Gary Dews at Capital Audiofest 2025
Audio Note UK TT3 Reference Turntable Debut at Capital Audiofest 2025
Kevin Hayes of VAC at Capital Audiofest 2025
2WA Group debuts Aequo Ensium at Capital Audiofest 2025
Capital Audiofest 2025 lobby marketplace walk through day one
Lucca Chesky Introduces the LC2 Loudspeaker at Capital Audiofest 2025
Capital Audiofest 2025 Gary Gill interview
Sponsored: Pulsar 121
Acora and VAC together at Capital Audiofest 2025
Scott Walker Audio & Synergistic Research at Capital Audiofest 2025: Atmosphere LogiQ debut
Sponsored: Symphonia
Sponsored: Symphonia Colors

LATEST ADDITIONS

Lansche–Ypsilon–Aaudio Imports

Blues singer Jimmie Lee Robinson was singing when I entered the Aaudio Imports room, his jingling spurs sounding preternaturally real on the 6’-tall Lansche Audio 7 speakers ($108,000/pair). Like the Lansche 5.1 that I reviewed in July, the 7 uses an RF-energized corona tweeter to produce clean, transparent-sounding highs. Amplification was the new Ypsilon SET100 monoblocks ($125,000/pair) with a tubed Ypsilon PST-100 Mk.II preamp and tubed VPS-100 phono preamp, these two both favorites of Mr. AnalogPlanet, Michael Fremer.
Continue Reading »

Classic Audio–Atma-Sphere–Stahl-Tek–Purist

Classic Audio always makes good sound at Shows, and RMAF was no exception, both analog and digital sources sounding clean, clear and detailed. The system featured a pair of T-1.4 Reference speakers ($36,500/pair), this a retro-looking design combining two reflex-loaded, field-coil energized 15” woofers (one firing forward, the other downward) with a horn-loaded, field-coil energized midrange unit, and a Fostex tweeter. Amplifiers were Atma-Sphere MA1.5 monoblocks, cables were by Purist, and analog source a Brinkman Bardo turntable fitted with a Tri-Planar arm and van den Hul Grasshopper cartridge. The digital source was new to me: all from Texas-based Stahl-Tek, an Opus CD transport fed the “entry level” Ariaa D/A converter ($12,900).
Continue Reading »

Sanders Sound Delivers

People sat up and took notice when Sanders Sound Systems released their Model 10 full-size electrostatic loudspeakers with analog electronic crossover amplifiers a few years back. The latest version, Model 10c ($13,000/pair) was delivering solid, full-range sound from a system that also includes Sanders Magtech Stereo amplifier ($5000), new preamplifier that combines both line and phono stages ($4000), and their own interconnects and speaker cables.
Continue Reading »

Neat/Scheu/Zanden and More

High Fidelity Services of Braintree, MA was producing good, solid sound on well-recorded rock on a system that mixed two products it imports and distributes, Neat Acoustics’ Ultimatum XL6 loudspeakers ($14,280/pair) and Scheu Analog’s Das Laufwerk 1 turntable with 12" Tacco arm and Scheu/Benz cartridge ($15.995), with Zanden’s Model 2500 CD player ($22,000), Model 6000 integrated amplifier ($22,000), and 1300 phono stage ($13,750); Running Springs’ Maxim power conditioner ($6400); and Chord Cable Company’s SArum cabling ($8400).
Continue Reading »

Tocaro Loudspeakers

“We have no crossover,” I was told soon after I entered the Tocaro loudspeaker room. “Our tweeter receives the full signal. And even though our speakers are 100dB or more efficient, they can handle the 175W of power that we’re feeding them.”

Developed by Miguel Herrero and hand-built in Gütersloh, Germany, the Tocaro 42D ($14,000/pair including stands) was connected by Crimson interconnects ($360/m) and Crimson bi-wire speaker cable ($1070/8’ pair) to the Resolution Audio Cantata ($6500), Crimson 710 solid-state preamplifier ($7000), and Crimson 640E monoblock amplifier ($6000/pair). I tried to do what the sign said, and forget whatever I thought I knew, but I couldn’t overlook the sound of boxy percussion on my well-played Chesky CD of Marta Gomez, nor the bright edge around her voice.

Continue Reading »

Audio Summa

It was great to again encounter Silverline’s flagship Grand Bolero loudspeaker ($35,000/pair), displayed by Scot Markwell of Southern California’s Audio Summa. Together with Kuzma’s Stagi S NSE 12" w/TVA tower and Crystal Cable Silver ($2950) and Stabi SD in brass w/external power supply ($3700); BEL’s 1001 Mk.IV amplifier (NFS); and Furutech’s Lineflux RCA interconnects ($2704/1.2m pair), Speakerflux speaker cables ($3645/2m pair), and Powerflux power cords ($3007/1.8m each), the system produced admirable full-range sound.
Continue Reading »

BMS

Assistance Audio, North American distributor for BMS, was showing off the company’s drivers. As I was soon to learn, Lacoustic, JBL, and Volti are but three of the audio manufacturers that use BMS’s drivers in their products.

The company’s Jack Arnott explained that BMS’s drivers can be found everywhere from soundstages in LA to naval paging systems and home audio installations. “I’m using my own cabinets so you can see what’s inside,” he said. “I am using Home Depot speaker cable because I am selling speaker components, not speaker cable." Well, I must say that both Tony Bennett and K.D. Lang’s duet on “La Vie en Rose” and the opening chorale from Glenn Gould’s second recording of Bach’s Goldberg Variations sounded quite beautiful.

Continue Reading »

Carver Towers

According to Bob Farinelli of Bob Carver LLC, the legendary designer has “made some adjustments” to the sound of his 35-driver Bob Carver ALS line-source speakers with active tube based crossover network ($19,700/pair). I’ll say. The sound has improved greatly since I blogged Carver’s speaker and electronics at AXPONA in early June. The system’s subwoofer may have overloaded the small room—this is not the first or the last time you’ll read about bass overload in these blogs—but the line array’s ability to reproduce the timbre of an unnamed jazz trumpeter’s instrument was spot-on.
Continue Reading »

Sonic Studio’s Amarra Preview

Since Sonic Studio dropped the price of its Amarra music software system to $189, lots more people have been enjoying its sound. Less than two months after Amarra’s last release, James Anderson announced the imminent arrival of 2.4.3 (free to current owners). He also played Reference Recordings’ superb recording of Copland’s Symphony 3, one of whose movements has become known as the “Ode to the Common Man.” Turns out that the performance was recorded using Sonic Studio’s professional Soundblade products. Played back with Amarra 2.4.3, it sounded fabulous, with absolutely tight, room-shaking bass. No doubt Amarra’s optional equalization component, which can help control bass booming created by either room nodes or less than flat loudspeaker response, had more than a little to do with the success of the presentation.
Continue Reading »
Advertisement
Advertisement
Advertisement