Full Disclosure: All jazz writers fantasize about owning a jazz label. These fantasies persist even in our post-CD, download era, when the record industry as we knew it has been laid to waste. It is reasonable to speculate that, as a reader of this magazine and therefore a music junkie, you may have had an entrepreneurial record label fantasy or two of your own. For us, it should be interesting to hear from Mark Feldman, because he actually did it. In fact, he did it twice.

You think Watergate was a momentous break-in? You should hear what a good electronic Rolfing does to the sound of this meticulously built, full-sized, full-featured, and full-priced ($3495) phono section imported from New Zealand by Fanfare International. Out of the box, the Plinius M14 sounds like what it looks like: all silvery, hard, and steely. Just leaving it powered up doesn't do the trick, nor does playing music through it—unless you're prepared for endless hours of truly bad sound before the sonic clouds begin to break.

For a phono cartridge to generate current and voltage, something must move: a coil of wire (as in a moving-coil cartridge), or a magnet (as in a moving-magnet type), or a tiny piece of iron (a moving-iron type). In those rare cartridges that depart from the electricity-generating principle of the ones described above, it can be a displacement-measuring device in which a moving shutter modulates a light source to vary a supplied voltage (as in an optical cartridge), or one in which voltage is modulated when a tiny chip of silicon crystal is squeezed by a moving element, which varies the chip's electrical resistance (as in a strain-gauge cartridge). But regardless of what it is that moves in a cartridge, something has to.

In the introduction to "Recommended Components" in the final issue in Volume One of what was then called The Stereophile, published in May 1966, founder J. Gordon Holt briefly described his Top-Rated Loudspeaker Systems.

Altec A-7
A highly efficient horn-loaded system for use in large to very large listening rooms (at least 15' from the listening area), or for very high-volume "Row-A" listening. Excellent woofer-tweeter blending, moderately deep (useful 45Hz limit in most rooms) and very taut, well-defined low end. Highs smooth and slightly soft, yielding most natural high-end quality at high listening levels. Middles smooth, rather forward, placing closely miked instruments somewhat in front of the system itself.