Columns Retired Columns & Blogs |
Is there any way to judge the amount of negative feedback that is used based on any particular measurement?
Description: Solid state, class-AB power amplifier (output stage biased into class-A operation up to 12W). Inputs: 1 pair single-ended (RCA), 1 pair balanced (XLR). Outputs: 2 pairs binding posts. Power output: 150Wpc into 8 ohms (21.76dBW), 300W into 4 ohms (21.76dBW), 600W into 8 ohms (27.8dBW) as bridged monoblock (BTL). Instantaneous maximum output power: 1200W into 1 ohm (21.76dBW), 2400W into 2 ohms (21.76dBW), BTL. Frequency response: 20Hz20kHz, +0/0.1dB; 1Hz130kHz, +0/3dB. Voltage gain: 29dB. Input sensitivity (for 150W into 8 ohms): 1.24V. Input impedance: 51k ohms (unbalanced, "Line"), 28k ohms (balanced). Damping factor: 600 according to EIAJ Current Injection Method. THD: <0.003%, 1kHz at 150W into 8 ohms, <0.04%, 20Hz20kHz. Signal/noise: 117dB, IHF A-weighted. Power consumption: 540W (max), 250W (no signal), 1W, standby.
Dimensions: 17.3" (440mm) W × 8.8" (224mm) H × 19.1" (485mm) D. Weight: 106.5lb (48.4kg).
Finish: Silver.
Serial number of unit reviewed: M10800029 "Sample."
Price: $19,995. Approximate number of dealers: 75. Warranty: three years parts and labor.
Manufacturer: Luxman Corporation, 1-3-1 Shin-yokohama, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan. Tel: (81) (0)45-470-6980. Web: luxman.co.jp. US distributor: Luxman America Inc., 27 Kent St., Unit 122, Ballston Spa, NY 12020. Tel: (518) 261-6464. Email: Sales01@luxmanamerica.com. Web: luxmanamerica.com.
Is there any way to judge the amount of negative feedback that is used based on any particular measurement?
Each JC1+ has 198,000uF of OUTPUT capacitance. The 44,800uF is the INPUT power supply capacitance. Lets get our facts strait.
Hi
Sorry, what do you mean by "OUTPUT capacitance" ????
Jack L
Hi
Please get your "facts strait" when you said "198,000uF of OUTPUT capacitance.
You asked what you meant by it. You ignore my question ! You know or don't know the right answer at all ?
Jack L
Do you not understand filter capacitance in power supplies? Why do you keep asking the same idiotic question over and over?
Have another....I am done here.
Hi
YOU were 100% drunk when you quoted above stupid statement. YOU need a coffee to wake you up.
If YOU were not drunk, your would have stated: "198,000uF FILTER capacitance used in amp's output power section." You expect every consumer readers here knows your drunken use of English ????
I started desigh/builing solidstate power amps some 4 decades back.
FYI, If you knew enough filter capacitors, you should know huge huge huge capacitance is only part of the filter design for better SOUND !
Do you know the AC internal design of a capacitor ??
That was enjoyably well-written and I thought it was one of the better ones from the most recent Stereophile.