Two of the products I most wanted to see in the flesh at the show didn't actually arrive due to the exhibitor's respective shipping services. The first was Antelope's Rubicon DAC, lost by DHL; this time it was the Mimer music server from Bladelius, lost courtesy of UPS.

Too bad, because the photo in the brochure is quite enticing. The Mimer is essentially a wall-hung touchscreen device about 7.5 inches wide by 13.5 inches tall. You can see by the photo of a photo how the touchscreen display is arranged for album cover art and control/navigation. The chassis looks about an inch thick and inside is an upgradable hard drive for storing music as well as support for NAS and USB drives, 32/348 files, 4 SPDIF inputs, Wi-Fi and ethernet, internet radio and Spotify, headphone amp, multi-room support and analog input (for the built-in analog preamp).

Though I'm sure many will differ, I've always been partial to music servers that have always-ready built-in navigation screens like Meridian's Sooloos as apposed to relying on iPad apps. I'm hoping to get my hands on the Mimer in the future and see if it lives up to the photo and spec sheet.

MSB gets the award for most interesting new chassis design for their new The Analog DAC, which is essentially a single low-slung curvy slab of aluminum with pockets sliced out of the bottom for the electronics.

Pricey though it was, their Diamond DAC IV is the best I've heard in my system so far, so you have to wonder what the new DAC brings to the table. The intial price is $7,000 with one input module installed. You can install up to three and pick from ethernet, USB or SPDIF at $995 each. Add $1,000 for volume control and $3,000 for the powerbase option for a total of $12,990 fully loaded.

This is the first time I've taken a close look at the Gato products from Denmark. Though the company has a rich history at home, tracing their roots back through GamuT to other brands, the Gato moniker is now making inroads around the US. They manufacture speakers, amps and the $8,000 CDD-1 that I spotted in their room at the Venetian.

Promoted as "the first pocket-sized portable speaker good enough for the audio purist,” the Soundmatters FoxLv2 has had endorsements from renowned speaker designers—including Michael Kelly (Aerial Acoustics), Gayle Sanders (MartinLogan), and Peter Tribeman (Atlantic Technology)—and a rave review by Michael Fremer on AudioStream. There are three models, the price ranging from $149 to $229, the basic model accepting analog input only, the other two connected with Bluetooth (including aptX technology) as well. The top Platinum model has a longer battery life (20 hours vs 12 for the other two) and includes an AudioQuest interconnect. I have some interest in portable speakers, and have listened to a fair number of them, including the audiophile-oriented offerings from B&W, Arcam, and B&O, but somehow the FoxLv2 was not among them. CES 2013 gave me an opportunity to remedy this omission. The Soundmatters booth was in the iLounge section of the Convention Center, and when I got there it was surrounded by a full TV crew. There is apparently a lot of interest in this product.

Over at T.H.E. Show, Acoustic Sounds' Chad Kassem proudly showed me the box and inserts for his new Bill Evans Waltz for Debby reissue, which will be released as a UHQR LP. Kassem's QRP pressing pant has acquired the rights to JVC's 30 year-old LP technology and each 200-gram UHQR pressing, with its flat profile, will be hand-pressed on a Finebilt press and hand-inspected. Back in the 1970s I was told by an EMI executive that that they could have pressed perfect LPs but people would never pay for it. Chad didn't seem to get the memo as he has invested a lot of money in producing LPs the way they should have been all along!

Wednesday evening after the CES closed, Luke Manley (left) and Bea Lam (second left) of VTL held a reception to honor the memory of Luke's father and VTL founder David Manley, who passed away in December. Everyone present offered their memories of David, including Stereophile's Larry Greenhill (right) and Jason Serinus (second right).

Speakers in the VTL room were Rockport's new Atria ($21,500/pair). This is a three-way dsign using a 9" carbon fiber sandwich-cone woofer, a 6" carbon fiber sandwich-cone midrange unit, and a 1" beryllium-dome tweeter, with Transparent Audio internal cabling. The 43.5"-tall speaker has a specified frequency response of 28Hz–30kHz, –3dB, a 4 ohm impedance, and a sensitivity of 87dB/W/m. Driven by VTL MB450s in triode mode, Peter Gabriel singing David Bowie's "Heroes: from LP had a delicious tangibility to the voice and a powerful but clean bass line. "Sweet" I commented in my notebook.

The Arabesque speakers ($90,000/pair) in the Crystal room, with their glass enclosures, were familiar, as were the Crystal cables that Jason Serinus blogged about a few days ago. But the Siltech SAGA amplifier—for Structural Amplifier Gain Architecture— were new. Designed by Siltech's Edwin Rijnveld and costing $100,000, the three-piece, 300Wpc amplifier comprises a preamplifier chassis with ultra–low-noise tubes, a battery-powered voltage-amplifier chassis, and a current-amplifier chassis. No negative feedback is used, either global or local, and the current amplifier uses optical drive of the output transistors, called "Apollo Light Drive." Output device biasing is said to be class-A at all powers into all loads.

Meridian pioneered the integration of digital crossovers and D/A converters in a powered loudspeaker and the first room I visited at the 2013 CES featured the DSP7200 speaker ($38,000/pair). The has anew tweeter, said to be smoother and more open-sounding than the HF units used in earlier speakers, but perhaps more importantly, the 7200's crossover now compensates for the low-frequency group delay associated with the high-order alignment. This is difficult to do, as it conventionally demands a very long digital, computationally intense filter. However, Meridian's engineering team came up with a solution that only adds around 40 milliseconds of latency. While this might make video synchronization tricky, the added clarity at low frequencies was impressively audible. Bass started and stopped as it should, with none of the feeling of the lows being detached from the upper ranges that is typical of high-order woofer alignments.

Jeff Joseph was demming his new Pearl3 floorstanding speakers ($28,100/pair) in an all Bel Canto system (including their new USB converters), hooked up with Cardas cables. Jeff's music choice was decidedly idiosyncratic— a duet for marimba and double bass, a recording of an African singer and sax player made in his backyard, Harry Belafonte live at Carnegie Hall—but with every kind of music, the Pearls allowed the music to speak most effectively.