…
search
There was something for everyone in Sunil Merchant's Sunny Components room. Even if you didn't have a spare half million dollars to give for great music reproduction, you could still listen to MoFi's Lenny Mayeux spin vinyl on the Brinkmann Taurus turntable with 12.1 tonearm ($21,000) and Koetsu cartridge ($3995). Amplification was a CH Precision M 1.1 Amplifier ($54,000), L1 line preamplifier ($34,500), P1 phono stage ($31,000), and X1 dual power supply powering the P1 and L1. And if you had questions afterwards, you could always approach Merchant, Mayeux, or CH's Ralph Sorrentino.
Voss Audio, a southern California-based brand new to me, made an extremely strong show debut with its Voss Steve Keiser Design Magnum Opus stereo power amplifier ($80,000) and Vitra preamplifier ($50,000). The amp’s designer, who died last year, was one of the founders of B&K components. John Voss’s company also manufactures the Vitus phono preamplifier ($45,000). Rather than showing it, he teamed up with Philip O'Hanlon's On A Higher Note (shown above) to use a Revox/SonoruS PR99 open-reel deck to play master tapes through Graham LS5/8 loudspeakers ($14,000/pair) with Townshend super…
By a long shot, most people who visited the marketplace immediately headed to the LP bins and rummaged away. In fact, if my photo had come out, I could show you how busy the room was at 10:15AM on Friday, a time reserved for press, when a combination of vinyl-hungry exhibitors, attendees who managed to get in early, and press people from online publications that are dedicated to serving their owners first were pouring through bins, looking for buried treasure.
Hopefully, some of those folks made it over to Todd Garfinkle's MA Recordings booth and discovered some his fabled audiophile…
This report could also be titled "My Visit with Cable Support Plate and A/V Room Service," but that's hardly as eye-catching. And catching your eye is my goal, because there was a lot of import at these two booths.
John H. Bring's Cable Support Plate (CSP) manufactures single, dual, and quad power outlet plates designed to support heavy power cables that tend to pull out of the wall. There's even a long-nose version for outlets that are positioned sideways, with receptor prongs aligned on the vertical. All CSPs are 3D-printed; the largest takes 27 hours to manufacture. Given that one of…
I love when industry veterans get excited by new discoveries. Thus, when David Solomon of Qobuz began one of our interactions with, "Have you been to the room that's premiering the GaN (gallium nitride) tubed components?" I asked him to tell me more. David followed with something like, "I couldn't figure out how anyone could have possibly incorporated GaN class-D power technology into KT150, K88, and K120 GaNTubes until the guy showed the 'tubes' to me." That's when I knew I had to visit.
Nor did Solomon stop praising AGD's equipment and sound after we met. During my visit to…
In this moderately priced system, speaker designer and recording engineer Tony Minasian paired his new Oriaco G6 standmount loudspeaker ($3500/pair with stands) with Denon and Marantz gear. "Most of the sound comes from the full-range driver," he told me. "The tweeter mostly acts like a supertweeter." From what I could tell, its impact is major.
Minasian described his baby as "a BBC design with a twist." That twist involves different damping material and, perhaps, the placement of the rear port.
Minasian is also a recording engineer whose discs have been used by…
It's been a few shows since I've encountered one of Jeff Candy's granite Pietra loudspeakers, whose distribution is mostly confined to Southern California due to the high cost of shipping a speaker that weighs in excess of 350lb. Which doesn't mean that you can't get one shipped to upstate New York if that's where you live.
Pietra's flagship Model 3.10 ($19,000/pair) deviates from the large Pietra speaker I've seen in the past in that it's a one-piece sealed 3-way design with an internal divider between the woofer and the two drivers above it. The front baffle is ¼" thick marble, and the…
Folks were already packing up in the Wyred4Sound room when I happened upon an active display of their just-completed prototypes, none of which is listed on their website. If you total up the total cost of the Aura preamp ($2999, Aura GaN amplifier ($2999), MS i3 music server ($2999) with its outboard HCPS power supply ($999). Isolink USB reclocker ($399), 10th Anniversary DAC ($4499), and Reference Standard 1 speaker ($14,999/pair), plus cables and all the rest, you end up with a $31,213 system.
It wasn't the best scenario for listening, especially when someone from another…
"We are so proud of everyone who made T.H.E. Show 2021 come to life," texted show coordinator Emiko Carlin about what was the first post-pandemic audio show to take place in North America. "After more than a year of unprecedented losses, this was no doubt a true celebration of audio and musical connection. We are thrilled that 1416 unique attendees showed up to reconnect, and we are delighted that [they] all did it safely and responsibly. As the first audio show in the US to open, and one that had to honor venue attendance caps, we are over the moon with how of T.H.E. Show 2021 turned out. We…
The Who: The Who Sell Out
Universal 7711420 (5 CDs, 2 7" singles). 1967/2021. Kit Lambert, Pete Townshend, prods.; Damon Lyon-Shaw, Jon Astley, Andy MacPherson, other engs.
Performance *****
Sonics ****
Universal 7711420 (5 CDs, 2 7" singles). 1967/2021. Kit Lambert, Pete Townshend, prods.; Damon Lyon-Shaw, Jon Astley, Andy MacPherson, other engs.
Performance *****
Sonics ****
This 5-CD box-set version of The Who Sell Out is the latest iteration of a 54-year-old work-in-progress. It contains an unrivaled wealth of recorded information covering the period between the Who's second album, A Quick One (Happy Jack in the US), and the monumental rock opera Tommy.
At the package's core are remasters of the original album in mono and stereo. It also…