Recommended Components: Fall 2017 Edition Loudspeakers

Loudspeaker Systems

Editor's Note: Class A "Loudspeakers" are sufficiently idiosyncratic and differ enough from one another that prospective customers should read Stereophile's original reviews in their entirety for descriptions of the sounds. I have therefore just listed every system or combination that at least one of Stereophile's reviewers feels, as a result of his or her experience, approaches the current state of the art in loudspeaker design. (Note that, to be eligible for inclusion in Class A, the system must be full-range—ie, feature bass extension to 20Hz. It must also be capable of reaching realistic sound-pressure levels without any feeling of strain.)

For those unconcerned about the last few hertz of low-bass extension, we have created "Classes A, B, and C (Restricted Extreme LF)" for those speakers that are state of the art in every other way. Candidates for inclusion in this class must still reach down to at least 40Hz, below the lowest notes of the four-string double-bass and bass guitar.

In addition, such has been the recent progress in loudspeaker design at a more affordable level that we have an extra class: E, for "Entry Level." Someone once asked us why Stereophile bothers to review inexpensive loudspeakers at all: In effect, aren't we insulting our readership by recommending that they buy inexpensive models? Remember: It's possible to put together a musically satisfying, truly high-end system around any of our Class D and E recommendations. That's why they're listed-and why you should consider buying them.

A (Full-Range)

Bang & Olufsen BeoLab 90: $84,990/pair
The three-way Bang & Olufsen BeoLab 90 contains 18 drivers, 18 class-D power amplifiers, 9 DACs, and, to rule them all, a pair of DSP-enabling Analog Devices chips. (Vol.40 No.1 WWW)

Bowers & Wilkins 802 D3 Diamond: $22,000/pair
(Vol.39 No.6 WWW)

GamuT RS7: $39,900/pair
(Vol.38 No.9 WWW)

KEF Blade Two: $25,000/pair
(Vol.38 No.6 WWW)

Magico S5 Mk.II: $38,000/pair–$42,750/pair
(Vol.40 No.2 WWW)

Marten Coltrane 3: $120,000/pair
(Vol.39 No.6 WWW)

MartinLogan Masterpiece Renaissance ESL 15A: $24,995/pair
(Vol.40 No.1 WWW)

mbl Radialstrahler 101 E Mk.II: $70,500/pair ★
(Vol.35 No.4 WWW)

Revel Ultima Studio2: $15,998/pair $$$ ★
FK's long-term reference. (Vol.31 No.3, Vol.32 No.12 WWW)

Vandersteen Model Seven Mk.II: $62,000/pair
(Vol.33 No.3 original version, Vol.39 No.5 WWW)

Wilson Audio Specialties Alexandria XLF: $210,000/pair ★
MF's long-term reference. (Vol.36 No.1 WWW)

Wilson Audio Specialties Alexx: $109,000/pair
(Vol.40 No.5 WWW)

YG Acoustics Sonja 1.3: $106,800/pair ★
(Vol.36 No.7 WWW)

A (Restricted Extreme LF)

Aerial Acoustics 5T: $3795/pair (stands necessary)
Representing a departure from the sealed-box loading, rectangular cabinet, and metal-dome tweeter of the original Model 5 and its first variant, the 5B, Aerial Acoustics' new 5T sports a slotted reflex port on the gently sloped front baffle of a gracefully curved enclosure, and trusts its trebles to the same model of ring-radiator tweeter used in Aerial's well-regarded 7T floorstander. A 6.7" woofer with a papyrus-blend cone and a crossover network comprising "high-order multi-element" filters complete the picture. With the 5Ts mounted atop 24"-tall, sand-and-lead-filled Celestion stands, JA noted "somewhat reticent" trebles coupled with "superb bass control," the latter characteristic allowing bass guitar to "[speak] with authority in its lower register." The 5T presented "near-holographic images," and was so successful at resolving spatial information from a recording of an Eric Whitacre choral work that JA remarked, "This is how a pair of speakers with superbly accurate and stable stereo imaging can serve the music." At his test bench, JA noted slightly lower-than-specified sensitivity (85.2 vs 87dB), and some small and apparently port-influenced midrange peaks; otherwise, he said, "Aerial's 5T demonstrates excellent speaker engineering." (Vol.40 No.3 WWW)

Auditorium 23 Hommage Cinema: $49,995/pair (plus power supply)
Auditorium 23's Keith Aschenbrenner dreamed of making a commercial product that could combine a vintage Western Electric 555 compression driver with a modestly sized horn, supplemented with similarly efficient treble and bass drivers. When the Chinese firm Line Magnetic began making faithful replicas of the 555, Aschenbrenner saw his chance, and with acoustician Uwe Meyer created the Hommage Cinema, which combines LM's 555 with a tidy midrange horn, coupled with LM's replica of the vintage WE 597A treble driver/horn and a bass cabinet with two powered paper-cone woofers: one 7", one 12". Like their WE forebears, the LM drivers are field-coil types, so a 7V DC power supply is also required; Auditorium 23 offers the NT1 supply ($5495), which they commissioned from AcousticPlan. Used with his low-power Shindo tube amplification, the Hommage Cinemas presented AD with coherence, physicality, and exceptional ease: "the force behind [music's] remaking was on a par with the force behind its making." The leading edges of bass notes were slightly rounded, and treble extension was "noticeably less than one associates with modern loudspeakers," yet, overall, AD found the Hommage Cinema to be "the most thoroughly competent" contemporary high-efficiency speakers he has had in his home. In a Follow-Up, JA wrote of determining that the Cinema has a sensitivity of 102dB—"This is heroic engineering!"—and a triode-tube-happy 15 ohm impedance. While confessing that he could not live with the Cinema's lack of top-end energy, JA advised, "you should give this speaker a listen, just to experience what's possible from a classic compression driver loaded with a horn." However, he feels that Class B is a more appropriate rating for what he feels is an old-fashioned–sounding speaker. (Vol.39 No.11, Vol.40 No.1 WWW)

Bowers & Wilkins 805 D3: $6000/pair (stands necessary)
The smallest model in Bowers & Wilkins's Diamond line, the 805 D3 features a 1" diamond-dome tweeter carried over from earlier models (though B&W say they've improved its motor system) and a 6.5" woofer made of Continuum, a proprietary woven material that replaces the resolutely yellow Kevlar of the company's earlier speakers. The woofer is reflex loaded with a flared port on the front panel, and the tweeter is loaded with a transmission line inside an aluminum housing shaped like the head of the xenomorph from the Alien franchise. Placed atop 24"-tall, sand-and-lead-filled Celestion stands, the 805 D3s presented JA with "astonishing clarity in the midrange and treble," coupled with "impressive dynamic capability." He also noted that B&W's designers have "managed an optimal balance between bass power and control," evinced by the speaker's ability to reproduce double bass "with good weight, but also with the leading edges of notes well defined." Tape hiss in one recording and vocal sibilants in another were more audible than expected, leading JA to remark that "this is a speaker that will verge on the edge of excess with unsympathetic ancillary components, or in a room that itself emphasizes the highs"—an observation borne out during JA's test regimen, which revealed "a somewhat 'tailored' frequency response in the treble." (Vol.40 Nos.3 & 5 WWW)

Crystal Cable Arabesque Minissimo Diamond: $19,995/pair (stands included)
Unlike its larger stablemate, the Crystal Cable Arabesque—a floorstanding loudspeaker in a stunning glass enclosure—the two-way Arabesque Minissimo Diamond is built into a compact but radically shaped monocoque cabinet milled from a single piece of aluminum-loaded polymer. It features a laminated-paper 6" woofer and a diamond-dome 1" tweeter, the latter protected by a laser-cut grille. Its aluminum stand, atop which the speaker reaches a height of 38", is integral. With a nod to "the intellectual elegance of a speaker that is no bigger than it needs to be," JA described being impressed by the Arabesque Minissimo Diamond, praising in particular the speaker's consistently "excellent imaging and clarity." That said, he also noted the speaker's "slightly midrange-forward balance," and the fact that $19,995/pair is "very expensive for a small two-way loudspeaker." Writing from his test bench, JA discovered less than the specified sensitivity—81 instead of 83.5dB—and in-room behavior that supported his impression of a "midrange-dominant" sound; otherwise, he declared, the Arabesque Minissimo Diamond "offers respectable measured performance." (Vol.39 No.10 WWW)

DeVore Fidelity Orangutan O/96: $12,000/pair ★ (stands included)
Handmade in Brooklyn, New York, the O/96 is a two-way, reflex-loaded, stand-mounted speaker with a rated sensitivity of 96dB/W/m and an unusually high nominal impedance of 10 ohms. The wide-baffle design measures 28.25" H by 18" W by 12" D and has a 1" silk-dome tweeter and a 10" paper-cone woofer. The O/96 exhibited a superb overall tonal balance with impressive clarity, color, impact, drama, and scale, said AD. "The O/96 is distinctly easy to drive with low-power amplifiers, yet it's clearer, wider of bandwidth, and more spatially accomplished than most other high-sensitivity loudspeakers," he summed up. JA's measurements uncovered a low-treble resonance and a lively enclosure, but these problems were considerably less audible than he was expecting. AD originally considered this a very high Class B recommendation, bordering on Class A, but as of April 2015, the rating is upgraded. In a Follow-Up, AD noted: "I have refined my own O/96 installation, moving each speaker farther from its sidewall, and minimizing the influence of unfortunate room characteristics with some John DeVore–inspired asymmetry," with excellent results. AD also quoted John DeVore's observation that, in 2013, the O/96 was his best-selling model "by a clear margin. I wouldn't be surprised to see that it did that again in 2014." (Vol.35 No.12, Vol.38 No.1. Vol.40 No.9 WWW)

DeVore Fidelity Gibbon 3XL: $3700/pair $$$ ★ (stands necessary)
Hand-built in Brooklyn, New York, the Gibbon 3XL has a beautifully finished cabinet made mostly of solid bamboo, and uses an unusual 0.75" tweeter and a 5" midrange/woofer custom-designed for DeVore by SEAS. The speaker has a claimed sensitivity of 90dB and a nominal impedance of 8 ohms, never dropping below 7.4 ohms. While the comparably priced Harbeth Compact 7 ES-3 offered a slightly richer, fuller sound, the Gibbon 3XL produced excellent low-level resolution, reasonably wide dynamics, and stable, pinpoint imaging, said ST in June 2010. In his April 2017 Follow-Up, HR wrote that his time with the 3XLs was all about "Leica-like focus, pulsing flow, [and] fresh-air transparency." He added that, although their bass performance was limited, the DeVores' "ability to reproduce human voices, chamber orchestras, and architectural spaces was as good as those things get." The almost obligatory matching bamboo stands add $695/pair. (Vol.33 No.6, Vol.40 No.4 WWW)

Dynaudio Contour 20: $5000/pair (stands necessary)
The 17.3"-tall, 34.2-lb Dynaudio Contour 20, which HR described as "luxuriously large and heavy for a stand-mounted model," has a 1.1" Esotar2 soft-dome tweeter and a 7.1" Magnesium Silicate Polymer (MSP) mid-woofer, crossed over at 2.2kHz and bolted to a ½"-thick aluminum baffle. Resistive loading for its rear-mounted reflex port is user-adjustable by means of foam inserts. Used with Dynaudio's optional Stand 6 ($500/pair), and following a few setup challenges—tube amplification of at least moderate power is among the key requirements—the Contour 20s rewarded HR with a soundstage that was "galaxy deep, the orchestra precisely arranged on it," plus "a lively sonic luminescence" and "fierce forward momentum" on classic bluegrass music. While expressing his belief that "a loudspeaker expresses its full character in how and where it directs the listener's attention," HR praised the Contour 20 for performing "well on both the poetic and scientific levels," offering "a near-perfect balance of the Apollonian and the Dionysian." In measuring the Contour 20, JA found a sensitivity slightly lower than specified (84.2 vs 86dB), and a faint port whistle that was audible only from behind the speaker; he declared the Dynaudio an exemplar of "excellent audio engineering." In the May 2017 issue, JA described trying the Contour 20s in his own listening room. Compared with the similarly priced and more sensitive Bowers & Wilkins 805 D3, he found that the Dynaudio extended lower in the bass, and while it gave richer-toned accounts of some instruments, it offered "more neutrally balanced top octaves." The Contour 20 is, JA concluded, "a true monitor speaker." Add $750/pair for premium finishes. (Vol.40 Nos.4 & 5 WWW)

ENIGMAcoustics Sopranino Electrostatic supertweeter: $3690/pair ★rf (stands optional)
Here's something you don't see every day: a horn-loaded, self-polarized, electrostatic supertweeter. The Sopranino is a 6-lb, 7.6"-tall enclosure intended for installation either atop the user's nominally full-range speakers or on their own height-adjustable stands ($600/pair). Its 12dB/octave high-pass filter can be set to one of three crossover frequencies—8, 10, or 12kHz—and connection via the Sopraninos' binding posts puts the supertweeters in parallel with their host speakers. A rear-mounted toggle switch offers the option of –3dB of attenuation. JA found that the Sopraninos, when used with the Joseph Audio Perspective loudspeakers, had a decidedly subtle influence on the sound of his system; on removing them after a week of listening, he declared his system still sounded good—"Just not quite as good." With JA's vintage Rogers LS3/5a loudspeakers, the Sopraninos allowed cymbals to sound "more like struck bronze than shaped and textured white noise," and stereo imaging was more palpable. Measurements revealed a clean cumulative spectral-decay plot and other distinctions, although JA was surprised that, by the end of the review, one of the Sopraninos had ceased performing above 15kHz: an enduring mystery. Writing in his Follow-Up review, AD also reported a spot of trouble: one of the Sopraninos in his loaner pair arrived in non-working condition. EnigmAcoustics replaced that well-traveled pair with a fresh one, and AD went on to enjoy "a greater improvement in spatial performance than any other aspect of playback" when using the Sopraninos—plus their optional stands—with his Quad ESL loudspeakers. As he wrote, "my assessment of the EnigmAcoustics supertweeter is precisely the same as JA's: 'An audition will be mandatory prior to purchase.'" (Vol.37 No.6, Vol.39 No.11 WWW)

Fujitsu Ten Eclipse TD-712z Mk.2: $10,600/pair (stands included)
RD reviewed the original version of this unique speaker—it uses a single 4.7" driver with a glass-fiber/cotton cone mounted in an egg-shaped ported enclosure—in January 2007 and was very impressed with its sound. Though the TD712z wouldn't play very loud and didn't go very deep, it had clarity, transparency, resolution, timbral accuracy, and image specificity that were "simply breathtaking," said RD. JA was impressed by the speaker's time-coincident presentation and freedom from cabinet resonances, though he was more bothered by its distinctly non-flat frequency response. The new version improves the original's power handling and extends its low-frequency response. "In a modestly sized room, with no help from subwoofers, the TD712zMk.2s delivered sound that was . . . well . . . extraordinary," he concluded. Matching sand-filled stands are included. (Vol.30 No.1, Vol.38 No.5 WWW)

Joseph Audio Perspective: $12,999/pair ★
The 36"-tall, floorstanding Perspective combines the same SEAS 1" impregnated-fabric dome tweeter used in Joseph Audio's Pulsar with two SEAS 5.5" magnesium-cone woofers, all mounted on a baffle profiled to optimize high-frequency dispersion. The woofers are reflex-loaded with a rear-mounted resistive port—the resistive foam can be removed for certain applications—and, according to JA, with "an Asymmetrical Infinite Slope Crossover set at 2kHz, with about a 40dB/octave low-pass slope for the woofers." In his listening, JA noted slightly unforgiving trebles on recordings with ragged high frequencies, but with good recordings, the Perspectives delivered "a wide, rich sweep of full-range sound, with tangible stereo imaging." JA also noted midrange clarity and lack of coloration, and that the Perspective's bass performance required an amp with a firm hand lest it sound a bit phat. Summing up with praise for the Perspective's cosmetics and small footprint, he concluded: "It's a lot of high-performance loudspeaker in a beautiful, modest-sized, domestically appealing package." (Vol.37 No.7 WWW)

KEF Reference Five: $19,000/pair
See JA's review in this issue.

KEF LS50 Anniversary Model: $1499.99/pair $$$ ★ (stands necessary)
This tribute to the famed LS3/5a monitor was made to celebrate KEF's 50th anniversary. Measuring just 11.9" H by 7.9" W by 10.9" D, the two-way, reflex-loaded design combines, in KEF's Uni-Q driver array, a 1" vented aluminum-dome tweeter and a 5.25" woofer cone of magnesium-aluminum alloy. The beautifully finished, computer-modeled MDF cabinet incorporates a convex front baffle, offset port, and damped internal cross-bracing for optimal suppression of external sound radiation and internal standing waves. The LS50 produced a surprisingly large, clean, transparent sound, with natural tone color and precise, stable stereo imaging, said JA, who also noted superb measured performance. "Recommended. Highly." ST found the LS50's tonality "spot-on, more neutral than sweet," adding that the diminutive KEFs could deliver "surprising bass: down to around 50Hz." ST's verdict: "I haven't had such great sound in my listening room since the departure of Quad's ESL-2805 electrostatics." As SM put it: "In 13 years of working at Stereophile, I have not seen another component that offers such a radical combination of value and performance." Late in 2014, after spending time with some new LS50 samples that he had purchased, JA wrote: "[Although] it had been two years since I'd last listened to the KEF LS50 at home, getting a new pair reminded me why I had so highly recommended them. The KEF LS50 gave a sound that was evenly balanced from the upper bass through the high treble, with superbly defined imaging." (Vol.35 No.12, Vol.37 Nos. 5 & 6, Vol.38 No.1 WWW)

Kii Audio Three: $13,255/pair including Kii Control unit (stands necessary)
In a field of endeavor in which, according to KR, "we have not seen anything really new in a long time," the Kii Three impressed him as "a refreshing splash of cool water." This three-way, six-driver loudspeaker is self-amplified—each Three contains six 250W Ncore class-D modules—and uses an integral DSP system to perform crossover functions, room-boundary compensation, phase equalization, and to allow the user to shape the radiation pattern of its drivers. (As KR remarked near the end of his review, "the only valid comparison was with B&O's BeoLab 90.") Bundled with the Three—which stands only 16" tall and is intended for use on purpose-made stands—is a wired remote control for volume adjustment, input selection, and other functions. In spite of the Kii's modest size, it was, per Kal, "entirely satisfying in delineating the descending pedal notes" in a favorite pipe-organ recording, and was "almost unique" in its ability to convey "the sensation of a single throbbing column of air." Not only that, but the Threes' "dynamic range was huge," and KR was impressed by their soundstaging and transparency: "The Kii Three didn't just lift a veil away from the music—it removed a heavy cloak." In measuring the Kii, JA noted its lively enclosure, but was otherwise "very impressed." (Vol.40 No.9 WWW)

Monitor Audio Platinum PL300 II: $14,495/pair
A functional—but not cosmetic—update of their original PL300, Monitor Audio's latest speaker is a three-way, four-driver floorstander with two reflex-loaded 8" woofers, a 4" midrange cone, and a Heil-style air-motion tweeter bearing the Monitor Audio trademark MPD, for Micro-Pleated Diaphragm. The PL300 II's curved, multilayer cabinet is made of a mineral-loaded thermoset polymer. After extended listening, RD felt that the PL300 II deserved comparison with the legendarily non–boxy-sounding Quad ESL, ultimately finding that the Monitor "had less 'speaker sound' than any loudspeaker I've reviewed." According to RD, "Monitor Audio has managed to reduce distortion and nonmusical resonances to a degree that made it easier to imagine that I was listening to live singers," and concluded by naming the PL300 II "my new reference." Apart from uncovering a lower sensitivity than specified (87 vs 90dB), JA gave the PL300 II a clean bill of health: "I am not surprised that RD was impressed . . . so was I." (Vol.39 No.11 WWW)

PSB Imagine T3: $7498/pair
PSB's new flagship is a three-way, five-driver floorstander built into what JA described as "a gracefully curved, veneered enclosure, formed under pressure from MDF laminations" and adding up to "a gorgeous-looking piece of furniture." Each of the Imagine T3's three 7" woofers is loaded with its own reflex-ported (to the rear) subenclosure, while the 5.25" midrange driver—whose cone is formed from the same compressed-felt-and-fiberglass material as the woofers—has its own sealed enclosure. The tweeter is a 1" titanium dome, the operating range of which is extended to a lower-than-usual 1800Hz. JA achieved the best bass performance when the bottommost reflex port on each speaker was occluded by a rubber plug, supplied by PSB for such in-room tuning. According to him, the T3's obvious neutrality kept it from being impressive in a superficial, fleeting way; rather, as the review period continued, the Imagine T3s revealed "superb sound quality for what is still a relatively affordable price." Apart from noting a reflex-port resonant peak that made itself known in the midrange (650Hz) and a disparity between observed and specified crossover frequencies, JA declared that "PSB's T3 demonstrates excellent speaker engineering." (Vol.39 No.8 WWW)

Quad ESL-2912: $13,999/pair
The new Quad ESL-2912 electrostatic loudspeaker is a direct descendent of the Quad ESL-989, itself a variation on the successful Quad ESL-63—the speaker in which designer Peter J. Walker introduced his concept of annular-ring stators fed by progressively delayed signals, to mimic point-source dispersion. The ESL-989 was, in essence, a taller ESL-63 with two more bass panels, with consequently better bass performance and higher maximum SPL levels. The ESL-2912, manufactured in China, is offered as a better-built and thus performance-optimized ESL-989, with such refinements as a stiffer frame, veneered plywood panels intended to further stiffen and damp the speaker, physical separation of the ESL-2912's power-supply and audio circuits, and a more acoustically transparent grillecloth/sock. RD, no stranger to electrostats in general or Quads in particular, praised the ESL-2912 for its ability to play loudly enough and to provide sufficient bass extension and power. But, he wrote, "the greatest strength of the Quad ESL series, beginning with the ESL-63, has been, and continues to be, its midrange: smooth, revealing . . . and presenting a virtual open window on the music." JA's measurements uncovered a high treble range that's "first a little peaky, then rolls off sharply above 15kHz or so," and a "hashy" waterfall plot, the latter "like that of every other panel speaker I've measured." (Vol.40 No.8 WWW)

Rockport Technologies Avior II: $38,500/pair
The Avior II is a three-way floorstander in a heavily braced, raked-back enclosure that boasts a triple-laminated, constrained-mode-damped construction, all mounted on an integral base—hence its back-breaking weight of 220 lbs. The reflex-loaded Avior II uses two 9" carbon-fiber, sandwich-composite-cone woofers, designed from the ground up by Rockport; also designed in-house is the speaker's 6" carbon-fiber, sandwich-composite-cone midrange driver—which, like the woofers, has a cast-aluminum frame and a vented titanium voice-coil former. High frequencies are handled by a 1" beryllium-dome tweeter from Scan-Speak, housed in a shallow waveguide. Though installation and setup posed some challenges—have we mentioned that the uncrated speaker weighs 220 lbs?—JA was rewarded with speakers that provided a "resolutely neutral" tonal balance (though they were a bit lean at the start) and excelled with voices. Also impressive was the Avior II's combination of bass extension and low-frequency transparency: "The Rockport was definitely a bass guitarist's speaker," JA wrote, "offering definition without boom." On the downside, he detected a narrowband coloration that, with some piano recordings, accentuated certain notes. Writing from his lab, JA noted that the Avior II was, at 89dB, 1dB more sensitive than specified, and praised the "superbly clean initial decay" evident in its cumulative spectral-decay plot. He ultimately declared the Rockport an example of "excellent speaker engineering." (Vol.40 No.8 WWW)

Spendor D7: $5995/pair $$$ ★
The British-built D7 is a 2.5-way, 38"-tall floorstander, with a rated sensitivity of 90 dB/W/m and a nominal impedance of 8 ohms. Its driver complement includes a 7/8" soft-dome tweeter with a specially designed cover of stainless-steel mesh, a 7" plastic-cone mid/woofer, and a 7" Kevlar-cone woofer, the latter two both made by Spendor and loaded by the same rear-mounted reflex port. Used with ST's 80Wpc Quicksilver Silver 88 tubed monoblocks—"a superb combination"—and giving their best about 3' from the wall behind them, the D7s played with "authority, weight, and speed." ST praised the speaker's fine trebles—"a crystalline clarity that put the Spendor D7 among the finest speakers I have heard at any price"—and noted that, "40 years on, Spendor is still known for getting the midrange right." Although ST's 3.5Wpc 2A3 amplifier failed to coax from the D7 sufficient bottom-end authority, the sound of that combination was "glorious"—and the Spendor was otherwise easy to drive with tubes or transistors, ultimately coaxing from the floorstander-phobic ST the highest praise: "one of the finest loudspeakers I have had in my listening room." JA confirmed its distinction as a 2.5-way (not a 3-way) design, and praised its overall "excellent measured performance." (Vol.37 No.9, Vol.38 No.4 WWW)

Technics Premium Class SB-C700: $1699/pair $$$ (stands necessary)
In 2015, Technics re-entered the perfectionist audio market with four Premium Class products, none more interesting than the compact and decidedly high-tech SB-C700 loudspeaker. Standing 13" high, the speaker's MDF cabinet is designed with a wider-in-the-middle profile when viewed from the front, and has walls of varying thickness to help tame internal resonances. The two-way SB-C700 has a reflex-loaded 6.5" woofer, the flat diaphragm of which is a sandwich of carbon cloth and honeycombed aluminum, plus a coaxial 0.75" tweeter with an aluminum dome and a neodymium magnet. HR put the SB-C700E through its paces with a variety of amplifiers, discovering such consistent traits as very good forward momentum with briskly paced music and laudable clarity and transparency, and noting that the Technics produced "not the biggest but perhaps the most properly scaled soundstage" among the small speakers he'd recently auditioned. HR added that the Technics speaker reached lower in the bass and "presented a wider spectrum of bass detail" than the KEF LS50 and lacked the "treble exaggerations" of the Falcon LS3/5a, although, with some recordings, it missed a bit of texture and force. Pointing to its higher-than-specified sensitivity, well-designed reflex tuning, and "impressively clean" cumulative spectral-delay plot—among other qualities that became apparent on his test bench—JA lauded the SB-C700E's "excellent audio engineering." (Vol.39 No.1 WWW)

Trenner & Friedl Sun: $3450/pair (stands necessary)
Imagine a SEAS coaxial driver—a 1" silk-dome tweeter set into the throat of a 4.7" black-anodized aluminum mid/woofer—in a ported cabinet only 8.5" high by 6.25" wide by 5.5" deep. That is the Tenner & Friedl Sun, an 82dB-sensitive loudspeaker that nevertheless impressed the heck out of KM, who likes his loudspeakers—not to mention his women, his coffee, and his hairstyle—au naturel. Newcomers Trenner & Friedl, who build the Sun in the forested countryside of Styria, Austria, claim that the Sun's solid-birch cabinet adheres to the oft-mentioned (especially in sales literature) golden ratio. JA dismissed that claim as incorrect, but otherwise—and apart from noting the presence on all cabinet surfaces of a 605Hz mode—declared that the Sun "offers excellent measured performance." KM praised the Sun for its "ample bass reproduction" in his New York City apartment, its "terrific drive [and] clarity," and its "astounding rhythmic drive" when partnered with the right amplifier. Ken's conclusion: "a modern classic." (Vol.40 No.1 WWW)

Triangle Signature Delta: $8000/pair ★
Triangle's Signature Delta is a three-way floorstander whose drivers and enclosure are all designed and manufactured in-house, said house being in France. Its two 7.3" fiberglass-cone woofers are loaded by a bifurcated reflex port on the front, while a 7.3" paper-cone midrange driver handles most of the audioband. That midrange is of notably limited excursion, in which vintage context the Signature Delta's horn-loaded titanium-dome tweeter, mounted atop the 4'-tall, curved-sidewall cabinet, fits well. Triangle specifies the Signature Delta's sensitivity as 92dB/W/m and its impedance as 8 ohms nominal, 3.2 ohms minimum (but see below). JA praised the Triangle's bass, observing that "a pipe-organ recording . . . had tremendous weight through the Deltas when the bass pedals descended to 32Hz," while noting that the Delta's low frequencies had "excellent pace and force" and "[a] propulsive way with well-recorded rock." JA praised as equally important the speaker's resolution and clarity, and noted a superior "jump factor" that did not compromise neutrality: "Unless you like your music tame and uninvolving, this is a speaker well worth an audition." In his measurements, JA described the Signature Delta as "a well-engineered, well-optimized loudspeaker," although he uncovered an unkind impedance-phase angle at 82Hz that would seem to require a well-muscled amp. (Vol.37 No.9 WWW)

Volti Audio Rival: $7900/pair
The smaller and less expensive sibling of the well-regarded Volti Vittora, the Rival combines a 15" paper-cone woofer with a rectangular-mouthed wooden horn driven by a compression driver with a 3.5" phenolic diaphragm, and a 1" compression tweeter mounted to a molded Tractrix-flare horn with a 1" compression driver. The crossovers are adjustable, and a range of finish options is available. (The price above is for cabinetry with just a satin lacquer finish on its birch outer ply, and without the optional grilles.) Driven by a modestly powered Shindo Laboratory tube amp in KM's modestly sized room, the 125-lb Rivals "managed the sort of 'disappearing' act I've heard only from electrostatic panels." The sorts of colorations that some associate with horns never intruded—"the Rivals were the most neutral, transparent, dynamic speakers I've heard"—and although some adjustments were required to prevent them from sounding lean, ultimately, bass performance was "as riveting, powerful, and forceful, and as full of tone, texture, and energy as I've heard." KM's conclusion: "a true bargain." JA's technical assessment: "one of the highest-sensitivity loudspeakers I've measured," whose perceived balance "will depend to a greater degree than usual on the . . . size and acoustics of the room." (Vol.40 No.6 WWW)

Wilson Audio Specialties Duette Series 2: $22,500/pair (stands included)
In the words of company founder/chief designer Dave Wilson, the Duette Series 2 loudspeaker was created for a "hostile environment," the definition of which includes limited floor space and the need to keep loudspeakers close to room boundaries. Codesigner Daryl Wilson made for the Series 2 a new stand, to which the crossover and connecting cables are integral. Other refinements include a more sculpted shape, and a new treble driver derived from the Convergent Synergy tweeter Dave Wilson designed for his top-of-the-line Alexandria XLF. Driven by low-power tube amps, the Series 2 Duettes impressed AD with how they "nailed the timbral colors of instruments and voice alike, with generous and very realistic saturation." And although the Duettes didn't have quite the scale or impact of his large Altec horns, AD observed that the Wilsons' "deep-bass power and extension were surprisingly good for their size. Cellos sounded subjectively undiminished down to their lowest tones, as did timpani and most double-bass notes, while nearly full weight was given to the orchestral bass drum." JA's measurements confirmed the high (91.6dB) sensitivity of the Duette Series 2, and he confirmed that, "Overall, the Wilson Duette's measured performance suggests that it is a well-engineered design optimized for use close to the wall behind it." (Vol.38 No.3 WWW)

Wilson Audio Specialties Sabrina: $15,900/pair
Approximately the size of the original WATT/Puppy combo, the single-box, three-way Sabrina enters the Wilson line just below the Sophia 3—which was, until now, the company's entry-level floorstander. The Sabrina has an 8" paper-composite woofer, a 5.7" paper-composite midrange driver, and a 1" doped-silk dome tweeter based on the Convergent Synergy tweeter first used in Wilson's Alexandria XLF, all built into a sleekly sculpted MDF cabinet with a baffle made of Wilson's proprietary X-material. Driven with a Theta Digital Prometheus amplifier, a pair of Sabrinas treated RD to a level of dynamic-contrast reproduction that "came closer to [my Avantgarde horns] than any other speaker I've reviewed." RD also raved about the Wilsons' lack of cabinet colorations, their "wide and deep" soundstage with "precisely defined" imaging, and their "first-rate" resolution. In his measurements, JA uncovered slightly higher-than-specified sensitivity (88.2 vs 87dB) and praised the overall design as "carefully optimized." Extra points for being the first Wilson floorstander to ship via UPS rather than common carrier, thus contributing to its affordability. (Vol.39 No.5 WWW)

YG Acoustics Carmel 2: $24,300/pair
The entry-level loudspeaker from Colorado-based YG Acoustics, the Carmel—now revised as the Carmel 2, with curved rather than straight sides and baffle—is a two-way design in a sealed enclosure of CNC-machined aluminum. Its 7" aluminum-cone woofer is made in-house, as is the aluminum frame for its 1" soft-dome tweeter; even the air-core inductors for the Carmel 2's crossover network are wound on the premises. Perhaps counterintuitively, setting up the Carmel 2s in JA's room proved trickier than with YGA's larger, more complex Sonja 1.3, the best results in terms of bass smoothness being achieved with an asymmetrical installation relative to the side walls, and the best tonal coherence achieved with a PrimaLuna tubed integrated amplifier. JA described the Carmel 2's midrange as "superbly natural," and said that "its clean highs gave the cymbals and triangle a superbly real quality" on a DSD file of a Lyn Stanley album of vocal standards. Notwithstanding the Carmel 2's "ungenerous" bass, JA concluded that, "properly set up in a sympathetic acoustic and matched with appropriate electronics, it will sing." JA noted that, in its bass alignment, the Carmel 2 does indeed maximize low-frequency articulation at the expense of "body," and praised the speaker's quasi-anechoic response curve as "one of the flattest I have ever measured." (Vol.38 No.12 WWW)

B (Full-Range)

Bowers & Wilkins 683 S2: $1650/pair $$$
The numbers tell an unusual story: The three-way, floorstanding 683 S2 would seem almost identical to Bowers & Wilkins' well-reviewed 804 Diamond (Vol.36 No.9) in every way—save for the $6000 difference in price per pair. As KR found, the Chinese-built, medium-sensitivity 683 S2 provided satisfying bass response, with "clean and full" organ notes and, in orchestral music, timpani that had "heft and impact." Spatially, the B&W's center-fill so impressed KR that he left his seat "to make sure that, somehow, my disconnected center speaker hadn't gotten magically reconnected." KR's verdict: The five-times-as-expensive 804 Diamond "scores over the 683 S2 only with some singing voices and in extension/enhancement at the extremes of the audioband." Test results, generally unremarkable, follow in what JA describes as a B&W tradition: speakers that don't measure quite as well as they could, but whose performance on the test bench reveals a product whose sound "has been carefully managed and [is] better than one might expect" for the price. (Vol.38 No.9 WWW)

Bryston Middle T: $6240/pair
A floorstanding tower just under 40" tall, the Bryston Middle T—the name is a reference to designer and Bryston cofounder James Tanner—is a three-way, reflex-loaded loudspeaker with a complex, well-braced, and ultimately heavy (over 80 lbs) enclosure. The Middle T has a 1" metal-dome tweeter, a 5.25" polypropylene-cone midrange driver, and two 8" polypropylene-cone woofers, the last loaded by twin rear-firing reflex ports. With the Brystons in place of his usual B&W 800 Diamonds, KR reported "such integrity that it might have been generated by a single driver . . . large, holographic soundstages that approached what I enjoy with my multichannel system . . . thrilling new detail" from old, familiar recordings, and bass that was "outstanding for a speaker of this size." On the downside, KR noted that "male voices sounded natural, but somewhat richer" than he's used to, and was disappointed by the appearance of the wood veneer and the "ungainly" grilles. JA found lower sensitivity than claimed (85 vs 88dB/W/m), and an impedance curve that, in his words, "starts to resemble a short circuit at ultrasonic frequencies," indicating the need for care in the selection of a partnering amp. Rosewood veneer adds $800/pair. Vinyl available at special order for $4680/pair. (Vol.38 No.2 WWW)

DALI Rubicon 8: $7995/pair
Neither a two-way nor even a three-way loudspeaker, the Rubicon 8 is referred to by its manufacturer, DALI, as a "2-1/2+1/2+1/2-way" loudspeaker: None of its three 6.5" woofers covers the same range as the others, and only the one at the loudspeaker's (physical) top extends as high as 2.5kHz, whence the music is given over to a 1.15" soft-dome tweeter, which itself hands off to a ribbon supertweeter at 14kHz. Although each is operated over a different frequency range, all three woofers are, in JA's words, "technically sophisticated," and benefit from a proprietary material said to reduce hysteresis distortion. They and the higher-frequency drivers are all made by DALI, and are installed on the front baffle of a 43.5"-tall MDF enclosure, the rear panel being taken up by two pairs of binding posts and three reflex ports. JA reported hearing good bass weight—although some lower-pitched instruments sounded "overripe" and "a little on the rich side"—and noted that "the Rubicon 8's reproduction of the top octaves was superb." JA also noted that, "With all recordings I played, the Rubicon 8s threw a solid, well-defined, impressively stable soundstage, with precise layering of image depth." Writing from his lab, JA suggested that the DALI's measured performance "indicates a careful balance of its design parameters to produce a seductive yet clean full-range sound." (Vol.38 No.3 WWW)

Focal Sopra No.3: $19,999/pair
Standing 49.8" high and weighing a hefty 154.3 lbs each, Focal's Sopra No.3 is big if not quite titanic—and, as KR pointed out, "When it comes to bass, big is good." Indeed, the Sopra No.3 employs two of Focal's 8.25" W-cone woofers (W being a stiff material with a structural foam core sandwiched by skins of woven glass fiber), complemented by a 6.5" midrange driver (also made of W) in the top enclosure and, in its wedge-shaped intermediate section, Focal's emblematic tweeter with inverted beryllium dome. Once the positions of the Sopras were fine-tuned—it took a bit of doing—KR was treated to "fully detailed bass, stable imaging across the spectrum, and appropriate ambient decay." In measuring the No.3, JA found highish (89.2dB) sensitivity but an impedance curve suggesting both that the Focal is "a difficult load" and that it will sound a bit brighter with tube amps, given the latters' typically high output impedances. That said, JA noted that, "Overall, this big speaker measured very well." Borderline Class A, feels JA. KR demurs. (Vol.40 No.4 WWW)

Focal Aria 936: $3999/pair $$$
This three-way, five-driver, French-made floorstander is among the first products to use Focal's new driver-cone material: a sandwich of flax and fiberglass that's said to offer low mass, high rigidity, and good self-damping properties. That material finds its way into the Aria 936's three 6.5" woofers and single 6.5" midrange driver, while its 1" dome tweeter is made of an aluminum-magnesium alloy, also new. The 936 also has three reflex ports—two on the front, one on the bottom—and a spiked plinth, the design of which contributed to easy setup work for RD, who also praised the 45"-tall Aria 936 for its "big, spacious sound" and for being "tonally neutral, with impressive dynamics, and powerful bass for the size of the speaker." RD also singled out for praise the Focal's treble range, for sounding "clean and extended but not overly bright, with no emphasis added to sibilants." At the other end, "double basses, bowed or plucked, were firm, not weak or exaggerated." RD added that, although "the Aria 936 couldn't match the startling dynamics of the horn-hybrid Avantgarde Uno Nano, it came surprisingly close." JA's measurements confirmed the 936's good sensitivity but found a wider low-impedance range than implied by its 8-ohm rating, thus indicating the need for a non-wimpy amplifier. Otherwise, his test results confirmed the Focal's standing as "an extraordinary value." (Vol.37 No.11 WWW)

GoldenEar Technology Triton One: $4999.98/pair $$$
Preceded in the GoldenEar line by a number of less-expensive loudspeakers, the Triton One is their new flagship: a 54"-tall tower whose cloth wrap conceals a powered, passive-radiator–loaded subwoofer system, two 5.25" midrange drivers, and, as RD describes it, "GoldenEar's version of the famed Heil Air-Motion Transformer, called a High-Velocity Folded Ribbon tweeter." Other distinctions include a fully balanced crossover, the use of DSP in the active portions of said crossover, and a 1600W internal subwoofer amp. According to RD, the Triton One performed with little strain on music played at "impress-your-friends levels," but that was far from this pony's only trick: "I could play the speakers at a low level and all the music was still there." He added, "the bass always tuneful and firm. In music that didn't reach down into the deep bass, there was no midbass emphasis to give a false impression that there was deep bass." JA's measurements confirmed the Triton One's high sensitivity, but noted an impedance-phase angle sufficiently challenging that the user "will require a good 4 ohm–rated amplifier to drive the speaker to acceptably high levels." In all, JA declared this latest GoldenEar to be "another finely engineered loudspeaker." Borderline Class A. (Vol.38 No.2 WWW)

GoldenEar Technology Triton Two+: $3499.98/pair $$$
Designed by a team led by industry veteran Sandy Gross and made in China, the original Triton Two was a three-way floorstander with a unique array of drive-units: a High-Velocity Folded Ribbon tweeter, two 4.5" midrange cones, two 10" by 7" passive radiators, and two 9" by 5" cone woofers powered by a 1200W class-D amplifier. The speaker's slim cabinet is made of high-density Medite, features a separate subenclosure for the midrange drivers, and is covered in black cloth. Though it exhibited some box colorations when pushed too loud, the Triton Two offered sweet, detailed highs, an uncolored midrange, well-extended lows, and excellent dynamics, said RD in 2012. In 2016, GoldenEar released the Triton Two+, with improved midrange/upper-bass drivers that feature new cones, surrounds, spiders, and voice-coils. (The other drivers remain the same.) Other improvements, including a revision to one leg of the crossover network and fine-tuning of the DSP that manages the handoff to the powered woofers, are also reported by the manufacturer. With the revised speakers in his system, RD heard "clarity and transparency that exceeded" what he remembered of the original Triton Twos, and suggested that the Two+ had less of a "speaker sound" than its predecessor. (Vol.35 Nos. 2 & 10, Vol.39 No.12 WWW)

KEF R700: $3599.99/pair ★
The middle model of KEF's R series of British-designed, Chinese-made loudspeakers, the R700 is a 44.1"-tall floorstander in which a 5" coaxial Uni-Q driver is joined by a pair of 6.5" concave-cone woofers, all drive-units made of aluminum. The Uni-Q handles everything from 500Hz up, while the two woofers—which physically straddle the Uni-Q driver, D'Appolito-style, and are reflex-loaded with twin ports—are specified as 6dB down at 37Hz. TJN found it more daunting than usual to get the R700s to perform as specified in terms of bottom-end extension and smoothness, but eventually was rewarded with "full-bodied and boom-free" bass, the extension of which surprised him—although the very deepest tones and sound effects went missing. A "slight forwardness to voices" in most music characterized the R700s, coupled with a top-end "reticence" in which not every recording retained its natural sparkle: "The KEF R700s . . . leaned more to the forgiving than to the aggressive side, but were by no means dull." Stereo imaging was "excellent." In his measurements, JA discovered the R700 to be less sensitive than claimed—87 rather than 89dB/W/m—but described the load as benign; beyond that, he found that the R700 "demonstrates some excellent engineering expertise." (Vol.37 No.9 WWW)

Paradigm Prestige 95F: $4998/pair
The top model in Paradigm's midprice Prestige series, the Canada-made 95F is a 2.5-way bass-reflex floorstander with a 1" aluminum-dome tweeter and no fewer than three 8" aluminum-cone woofers, one of which goes all the way up to 2kHz. (The other two venture no higher than 400Hz.) All drivers are proprietary, the tweeter being distinguished by a Perforated Phase Alignment (PPA) lens that appears, at first glance, to be a simple protective screen. The hefty (98 lbs) MDF enclosure rests on aluminum outriggers with adjustable feet; two pairs of binding posts are provided, to enable biwiring where desired. Notwithstanding his initial concern over handing off a highish range of frequencies to an 8" driver, TJN "heard no consistent problems in the speaker's upper midrange and low treble," and went on to praise the 95F's "tightly and consistently focused" imaging—though he added that "the 95F wasn't particularly forgiving of overbright source material." The speaker's bass performance, TJN noted, may be best suited to larger-than-average rooms. JA's tests uncovered some lively cabinet panels, slightly elevated tweeter output, wiggy response on the part of the highest-reaching woofer, and measurable differences between the left and right speakers. (Vol.39 No.1 WWW)

Revel Performa3 F208: $5000/pair $$$ ★
The F208, from Revel's Performa3 line, is a floorstanding three-way speaker with all aluminum drivers: a 1" dome tweeter, 5.25" cone midrange, and two 8" cone woofers. The woofers are reflex-loaded through a front-mounted port with a removable resistive plug, while the tweeter fires through a newly designed, dispersion-enhancing waveguide. Sensitivity and impedance are 88.5dB/W/m and 8 ohms, respectively. The biwirable F208 includes two user controls: a tweeter-level control that works in 0.5dB increments, and a bass-contour switch with settings for Normal—for speakers positioned away from walls—and Boundary. EL was impressed with the fit and finish of the F208s, which are made in Indonesia, and had no trouble optimizing them for his small room, in which they sounded seamlessly coherent, with note fundamentals "in perfect balance with the formants and overtones" of choral music. EL welcomed the effectiveness of the treble control, without which "the tweeter did very little to hide the flaws of bad recordings," praised the untubby and well-extended bass, described the stereo imaging as "superb," and lauded the Revel's lack of compression and apparent strain, pronouncing the F208 "my new benchmark for loudspeakers at this price." Summing up his measurements, JA wrote, "In every way, this is textbook loudspeaker design." (Vol.37 No.7 WWW)

Vienna Acoustics Beethoven Baby Grand-SE: $6000/pair
The drivers in this three-way floorstander comprise a 1.1" hand-coated silk-dome tweeter, a 6" midrange driver made of the company's proprietary X3P polymer, and two 6" woofers made of the same transparent material, stiffened with the radial ribs that have become a Vienna Acoustics trademark. The crossover uses first- and second-order filters at 150Hz and 2.3kHz, and at the rear of the enclosure, next to the reflex port, is a single pair of binding posts. In TJN's generously sized listening room, the Beethoven Baby Grand Symphony Editions sounded "'open and airy' . . . but not at all hard." At the other end of the audioband, "bass seemed more subdued than smash-mouthed, but I never found it lacking." Overall, listening to a variety of recordings through two different front ends, TJN found that the speaker's "lively but always natural-sounding balance kept me listening to recordings long after I'd planned to move on to others." In measuring the Viennas, JA found considerably lower sensitivity than the specified 91dB, and, despite a benign electrical phase-angle curve, recommended use of a good 4-ohm–rated amp. He also found some wrinkles in the performance of the midrange driver, but observed that in this speaker's "carefully balanced design," the effects of those flaws are reduced by other factors. (Vol.38 No.1 WWW)

B (Restricted-LF)

DeVore Fidelity Orangutan O/93: $8400/pair $$$ ★
Made in Brooklyn, New York, the Orangutan O/93 is a two-way floorstanding loudspeaker with a 1" soft-dome tweeter and a 10" paper-cone bass/midrange driver. It measures 35.5" H by 15" W by 10" D, and has a claimed sensitivity of 93dB and a nominal impedance of 10 ohms. The beautifully finished cabinet is made from a combination of Baltic birch plywood and MDF; the front baffle has a distinctive fiddleback mahogany veneer, while the sides, back, and rear are veneered in maple and finished in high-gloss piano-black lacquer. Driven by ST's Unison Research Simply Italy, the DeVores delivered a lively, immediate sound, with a sweet and extended treble, punchy bass, and a deep, wide soundstage with excellent center fill. (Vol.37 No.1, Vol.38 No.12, Vol.39 No.6 WWW)

Dynaudio Excite X14: $1299/pair $$$ ★ (stands necessary)
Descended from Dynaudio's Excite X12, itself a "Recommended Components" stalwart, the Excite X14 is a smallish (11.2" tall) two-way stand-mounter with a reflex port at the rear. Compared with its predecessor, the X14 boasts a redesigned 5.7" woofer, a more advanced coating for its 1" fabric-dome tweeter, a new crossover, and a refinement of its port tuning. The late BJR praised the X14 for a treble range that was "cleaner and more articulate in high-level passages" than its predecessor's, and noted that he was "very impressed with the Excite X14's bass performance throughout a wide range of recordings." The verdict: "Dynaudio has taken all of the aspects of the Excite X12 that I liked and improved them across the board," creating in the process BJR's "new favorite bookshelf loudspeaker for under $2000." In his measurements, JA confirmed that the X14 is easier to drive than the X12, and pronounced the new model "a well-engineered design." For his part, HR described the speaker's sound as "sober precision," noting that, through the X14s, "the bass is taut, fast, and detailed; the midrange lacks a bit of color and plushness; high frequencies are beautifully articulated, and never too wet or too dry." The Dynaudio Excite X14 is also available in active form as the Excite X14A ($2000/pair), wherein each driver gets its own internal 50W class-D amplifier. On its rear panel are EQ switches for adjusting bass, midrange, and, you guessed it, treble, plus a switchable high-pass filter for those who want to use the X14A with a subwoofer. With a Mytek Stereo192-DSD DAC as his source component, ML found the self-powered Dynaudios "excellent all around, throwing out an all-encompassingly rich and physical sound." (Vol.37 No.10, Vol.38 No.9, Vol.39 No.2 WWW)

Falcon Acoustics LS3/5a: $2995/pair (stands necessary)
In contrast to a typical ultradamped, ultraheavy, ultrabig speaker—which, according to HR, can sound an awful lot like "a moaning, wheezing pile of wood"—Falcon Acoustics' BBC-licensed LS3/5a loudspeaker proved capable of delivering "expression, transparency, [and] tonal purity." This true vintage reissue, created in part by the man who oversaw production of the KEF 127mm Bextrene-cone mid/woofer of the 1974 original, went so far as to make HR's own ca 1985 Rogers LS3/5as "sound a tad drowsy and fuzzy" by comparison. In HR's room, the Falcons loved low-powered amps—especially low-powered tube amps such as the 22Wpc Line Magnetic LM518IA—but turned up their noses at class-D amplification. In measuring the Falcons, JA went to the well and compared his findings with measurements, made throughout his 30+ years at Stereophile's helm, of earlier LS3/5a iterations. His verdict: Falcon Acoustics "has resisted the temptation to 'improve' the sound quality, but has also managed to re-create what made the speaker great in the first place." (Vol.38 No.8 WWW)

Harbeth Super HL5plus: $6499/pair (stands necessary)
"Like the sturgeon, the hellbender, and the woodlouse, the Super HL5plus bears an unusually strong resemblance to its prehistoric ancestor." Thus did AD put into context this most recent Harbeth: an update of the classic British box designed around two tweeters—a 1" aluminum dome and a 0.78" titanium dome—and a 7.8" mid/woofer whose cone is made from RADIAL2, the very latest version of Harbeth's proprietary polymeric composite (and the reason for the nominal plus). AD praised the stand-mounted Harbeth's "easy clarity" and the good degree of touch and force with which it reproduced notes in the bass range. The Super HL5plus was, he said, "somewhat more modern sounding" than its immediate predecessors. JA noted the Harbeth's intentionally lively enclosure, yet described the speaker's measured performance as otherwise "beyond reproach." (Vol.38 No.6 WWW)

Revel Performa3 M106: $2000/pair ★ (stands necessary)
A two-way, reflex-loaded speaker intended to be bolted to a matching M stand ($500/pair), the M106 is from Revel's Performa3 line of US-designed, Indonesian-made speakers. Its drive-units are a 1" aluminum-dome tweeter fitted with a waveguide said to improve dispersion above 8kHz—thus smoothing its frequency response and adding to the M106's detail resolution and spaciousness—and a reflex-loaded, 6.5" aluminum-cone mid/woofer. BJR: "The M106's stiff enclosure has its curved side panels formed from contiguous wood layers and is stiffened with strategically oriented bracing," and "the speaker's rear-firing port has identical flares at both ends"—to minimize compression and noise, of course. BJR said of the M106, "Its strengths impressed me across the board, especially for a speaker of its size and price," noting in particular the Revel's superb ability to articulate transients, its fine upper-bass clarity, and its low-bass forcefulness: "I found the speaker's bottom end impressive for a bookshelf model of its size." In addition to observing that "an amplifier or receiver rated at 4 ohms would probably work best with this speaker," JA noted "excellent measured performance that in turn reveals inspired audio engineering." Later in 2014, JA brought home the review pair, and compared them with a pair of the well-regarded KEF LS50: "[The] M106es did a little better when it came to separating the strands in [a] dense mix . . . [but] as much as I appreciated the Revel's transparency to recorded detail, its treble was a little unforgiving." But JA, whose room is not at all overdamped, then added: "In rooms that are larger than mine and/or more damped in the treble . . . the Revel M106's treble would tend to sound in better balance with the midrange." (Vol.37 No.9, Vol.38 No.1 WWW)

Sonus Faber Venere 2.5: $2499/pair ★
Beautifully finished in black or white lacquer, the Venere 2.5 is a compact (43.2" H by 13.3" W by 17" D), 2.5-way, reflex-loaded design with a 1.1" fabric-dome tweeter, a 7" Curv-cone mid/woofer, and a 7" Curv-cone woofer. The cabinet's sidewalls curve around to meet a very narrow rear panel just wide enough to accommodate a staggered array of four multiway terminals; the cabinet sits on a thick glass base plate that accepts four substantial spikes, the front pair nearly an inch longer than the rear, so that the entire cabinet tilts back to align the tweeter with the deeper woofer diaphragms. The sound was spacious, relaxed, and well balanced overall, with detailed mids and highs and a rich lower midrange, said KR. "The Venere 2.5 is not only provocatively sexy in appearance; it delivers," he concluded. The Venere 2.5 exhibited an exaggerated midbass on the test bench, but offered "respectable measured performance" overall, said JA. Add $499 for walnut wood finish. (Vol.36 No.11 WWW)

Sony SS-NA5ES: $6000/pair (stands necessary)
With the SS-NA5ES, Sony takes aim at what AD described as a lofty goal: "to create a compact loudspeaker that's as well balanced and as reliably musical as their SS-NA2ES floorstander." And while at first glance the finished product appears to be an SS-NA2ES with its bottom two-thirds missing, the reality is more complex. Here, the larger speaker's 5" spiral-cut paper midrange driver has been replaced by an identically sized aluminum-cone woofer, and the loading scheme has been altered accordingly. That said, the SS-NA5ES retains the larger speaker's I-Array of two 0.75" soft-dome tweeters straddling a single 1" soft-dome tweeter, all three covering the same bandwidth. In his system, used on 23.5" stands (not included), the smallest Sonys impressed AD with their "masterly," "clear," and "authoritative" sound, and provided especially good reproduction of singing voices: "Alfred Deller's distinctive tone and diction . . . emerged unscathed, with appropriate timbral warmth and presence." While noting that it will sound best "when used with amplifiers that are comfortable driving 4 ohm loads," JA wrote that, "[like the floorstanding SS-NA2ES], the SS-NA5ES is a well-engineered loudspeaker." (Vol.39 No.8 WWW)

Thiel Audio TT1: $7000/pair
A non-Thiel loudspeaker in all but name, the TT1, which is assembled in the US from Scandinavian drivers and Chinese enclosures, contains none of the design elements that were associated with the late Jim Thiel (first-order crossovers, raked baffles, corrugated driver diaphragms) and at least one that wasn't (a tweeter loaded by a shallow horn). That said, according to TJN, the three-way, four-driver, floorstanding TT1 was praiseworthy for refusing to impress on all recordings its own personality: "I can't think of many words to ascribe a 'characteristic sound' to the TT1: bright, dull, nasal, boxy, bloated, overly dynamic, showy—none fit. I have to limit myself to smooth yet detailed, uncolored (particularly with well-recorded voices), and tight, somewhat lean bass." That said, TJN suggested that other brands offer similar performance for less money: "the unmentioned elephant in the room is cost." JA's measurements confirmed the TT1's departure from Jim Thiel's adherence to time-coincident designs in particular, yet indicated that the new model is nonetheless an "excellent speaker." (Vol.39 No.9 WWW)

Wilson Benesch Series II Square One: $5195/pair (including stands)
The luxuriously finished Series II Square One—JM's review samples, the fit and finish of which he described as "second to none," were clad in Ebonized Walnut Gloss—is a two-way loudspeaker whose 1" soft-dome tweeter and 7" midbass driver are augmented with a 7" rear-mounted passive radiator and two bottom-mounted vents; dedicated stands accommodate the latter via metal standoffs that nonetheless hold the enclosure rigidly in place. The claimed sensitivity is 87dB, with impedances of 6 ohms nominal and 4 ohms minimum, and bass extension down to 45Hz. JM confirmed that last spec, noting performance in his room down to 44.1Hz: "very impressive for a speaker with an internal volume of only 10 liters." He also praised the Square Ones for "remarkable depth of soundstage" and "exemplary" clarity on piano, and concluded that the speaker "absolutely deserves a very high Class B (Restricted LF) rating." In measurements conducted for his Follow-Up report, JA found a sensitivity only slightly less than spec, plus "well-controlled horizontal dispersion, and clean decay in the treble." But he also uncovered a response peak between 3 and 7kHz, and suggested that the Series II Square One will sound best when the listener's ears are between 5° and 10° below the tweeter axis. (Vol.38 Nos. 8 & 9 WWW)

Zu Audio Soul Supreme: $4500/pair (may be higher depending on finish)
As HR was advised before reviewing Zu's Soul Supreme, "this is not your normal two-drivers-in-a-ported-MDF-box loudspeaker." Indeed, the Soul Supreme mates a 10.3" full-range driver, complete with whizzer cone, to a tweeter comprising a 113dB-sensitive Radian compression driver, loaded with an aluminum-alloy horn that stands proud of the 37.7"-tall cabinet. Bass extension and impact are maximized by the company's Zu-Griewe loading technology, the crossover is as minimal as can be, and the overall system sensitivity is specced at 97dB, with a tube-friendly 16 ohm nominal impedance. HR's listening notes point to the Soul Supreme's vivid microtextures, exceptional musical flow and viscosity, and massive and abundant dynamic slam. His conclusions: "These speakers represent what I value in audio engineering. These speakers get me and I get these speakers! Highly recommended; high Class B." JA's measurements uncovered lower sensitivity than advertised (a still-high 91dB instead of 97dB), but portrayed the Soul Supreme as "a very easy load." And while JA noted some wrinkles in the Zu's cumulative spectral-decay plot, these were not as audible as he'd expected: "I enjoyed the afternoon I spent listening to the speakers in Herb's system." (Vol.39 No.7 WWW)

C (Full-Range)

GoldenEar Technology Triton Five: $1999.98/pair
A two-way loudspeaker with three active drivers and four passive radiators, the Triton Five is the second-least-expensive model in GoldenEar's Triton line of floorstanders. Centered in a D'Appolito configuration at the top of this tower is the company's Oskar Heil–inspired High Velocity Folded Ribbon (HVFR) tweeter, straddled by two 6" cone woofers that are reflex loaded not by a port but by four side-mounted 8" passive diaphragms. The Triton Five's enclosure is otherwise a sealed box, covered with a stretched polyester sock. According to HR, the Triton Five was "a perfect match" with his Line Magnetic LM-518IA integrated amp, and although the very smooth-sounding GoldenEar didn't deliver the punch, sparkle, or flesh and blood of the more expensive DeVore Fidelity Orangutan O/93, it earned praise for re-creating "big, open, fully constituted" spaces. According to HR, even when heard to its worst advantage, the Triton Five "sounded beautiful but kind of soft and accommodating." Notably, JA's measurements revealed the Triton Five to be even more sensitive than specified—90.8dB vs the 90dB quoted by GoldenEar—and otherwise confirmed the speaker's "excellent measured performance at an affordable price." (Vol.38 No.12 WWW)

NEAT Acoustics Iota Alpha: $1995/pair
The newest NEAT confounds expectations: Though the size of a stand-mounted speaker at 17.6" tall, the Iota Alpha is intended to be used as a floorstander with its angled upper baffle aimed upward, toward the listener. The Iota Alpha also confounds the expectations of those who assume that two drivers on that baffle—a 2"-long ribbon tweeter and a 4" midrange driver—are the only ones in play: Also contributing to the claimed 33Hz–22kHz frequency response is a reflex-loaded, downward-firing 5.5" woofer on the cabinet's bottom panel, raised above the floor by four spiked feet. Evaluating the smallish NEAT floorstanders in his smallish apartment, KM had particular praise for their "fully present, tactile, and meaty sound," with instrumental tones that were "rich and saturated for such small speakers," and with scale, pacing, and dynamics that were "as accurate and thrilling . . . as I've heard." Writing from his test bench, JA noted lower-than-specified sensitivity (83dB vs 86dB), reflex-port response peaks at multiple frequencies, a response peak at 3kHz, and other wrinkles, all prompting him to say that he was "disappointed in its measured performance." Writing from his Bed-Stuy bothy, HR told of conquering his initial placement difficulties and ultimately wringing from the NEATs sound that was "always smooth and outgoing" and "did pace, rhythm, and timing better than most," though he noted that "clarity of aural image was not a strong point" of the Iota Alphas. Grilles now included in price. (Vol.40 Nos. 2 & 6 WWW)

C (Restricted LF)

ADAM Audio A3X Active: $699.98/pair (stands necessary)
From the pro-audio line of ADAM Audio GmbH comes the A3X active loudspeaker, a front-ported reflex design that uses a 4.5" carbon-fiber mid/woofer alongside ADAM's proprietary X-ART (for eXtended Accelerating Ribbon Technology) tweeter, the latter based on the famous (among audiophiles) Heil air-motion transformer. Each driver has its own dedicated 25W class-AB amplifier, and both RCA and XLR inputs are provided on the rear panel of the enclosure, which ML described as "ruggedly handsome." He was especially impressed with the ADAMs' "excellent dispersion characteristics" when used with his PonoPlayer, noting that the A3Xes "were capable of sounding as if the music they were playing was being made directly inside my head—like headphones, only better." (Vol.38 No.9 WWW)

ATC SCM7 v.3: $1749/pair ★ (stands necessary)
ATC's entry-level model is a small (11.8" H by 7.9" W by 9" D), two-way, stand-mounted speaker with a 1" soft-dome tweeter and a 5" mid/woofer. Unlike previous ATC models, the SCM v.3 has side panels that curve toward the rear, and its drivers are now flush-mounted in a fully veneered front panel. The sealed cabinet is available in handsome cherry and black-ash veneers. Claimed specifications include a lowish 84dB sensitivity and a flat nominal impedance of 8 ohms. Though it lacked low-end impact and resolution, the SCM v.3 produced an engaging overall sound marked by pinpoint imaging, excellent detail retrieval, and well-extended highs, said JM. On the bench, JA observed sensitivity even lower than that specified by ATC: 82 vs 84dB/2.83V/m, redeemed somewhat by impedance and electrical phase-angle curves that describe a benign load. JA was impressed by the SCM7 v.3's measured performance overall, noting that this British minimonitor "will sound best when the listener sits relatively close to it." (Vol.37 Nos.2 & 4 WWW)

Elac Debut B6: $279.99/pair $$$ (stands necessary)
Designed by Englishman Andrew Jones at Elac's new southern-California facility, the very affordable Debut B6 seems, at first glance, rather ho-hum: an MDF box just under 14" tall, with a reflex-loaded, 6.5" aramid-fiber woofer and a 1" fabric-dome tweeter, the latter firing from the apex of what its German manufacturer calls a "deep-spheroid waveguide." Notwithstanding what he perceived as an overly lively enclosure, HR's critical faculties were "ambushed by the Debut B6's good tone and easy-flowing musicality." Particularly with his 22Wpc Line Magnetic LM-518IA integrated amp, Herb declared that "the Elac B6es weren't just playing music—they were pumping tangible musical energy into the room," and concluded that their low price should not be taken as a sign of sonic compromise: "'Dorm-room speakers'? Not hardly!" JA's measurements confirmed that the B6's cabinet was indeed given to vibrating at just below 200Hz, but wrote that the speaker otherwise offers "excellent measured performance, especially when you take into account its affordable price." In his Follow-Up, KM wrote, "Anyone looking for an overachieving stand-mounted minimonitor in the $500–$1000 range better shift their view—the Elac Debut B6 is a knockout." (Vol.39 Nos. 4 & 7 WWW)

Magnepan Magneplanar .7: $1400/pair $$$
Magnepan's Magneplanar .7 planar-magnetic or "quasi-ribbon" loudspeaker is a two-way panel design that measures just over 54" high and 15" wide. The manufacturer's specs include a 4-ohm nominal impedance, sensitivity of 86dB, and bass extension down to 45Hz. Used on their own, especially when driven by Rogue Audio's 100Wpc Sphinx integrated amplifier ($1295), the .7s delighted HR with their "microdetail, transient attack, transparency, and soundstaging," but could also sound "a little bass shy." But when augmented with a pair of Magnepan's DWM bass panels ($795 each), the combination of .7 speakers and Sphinx amp delivered "disarmingly big, robust, vivid, and extremely tactile" sound with plentiful, "authentically toned" bass. "These Maggies did slam," HR declared, adding that he'd never enjoyed Led Zeppelin II more than through this system. Class B, felt HR; Class C decided JA, following his auditioning. (Vol.38 No.8 WWW)

Morel Octave 6 Limited Edition: $2799/pair (stands necessary)
In the bookshelf version reviewed by HR—the speaker is also available as a floorstander—the Octave 6 is a reflex-loaded two-way design in a polymer-coated MDF box standing just under 1' high. Its proprietary drivers, built in-house at the Morel factory in Israel, are a 11/8" Acuflex soft-dome tweeter and a 6" mid/woofer with a polypropylene cone. HR found that "the Octave 6 had a special way with singers and songs." Listening to a recording of Gregorian chants, HR noted that, "With the Morels, the adult singers' maleness was delivered with a lush, saturated tone," and added that the Octave 6 reproduced the natural reverberation of the room's acoustic "with striking clarity." On the downside, HR described how other speakers of the same size and somewhat lower price were more accurate in their bass reproduction, replacing the Morel's "loosey-goosey with tight and tasty." JA reported that the Octave 6 was less sensitive than specified—85.1dB vs 88dB—and that the bass extension was less than specified. He also noted some high-Q port resonances and a response peak at the top of the midrange. Matching stands cost $399/pair. (Vol.39 No.2 WWW)

Tannoy Reveal 402: $560/pair (stands necessary)
The Tannoy Reveal 402 active loudspeaker mates a 4" high-sensitivity mid/woofer with a ¾" soft-dome tweeter—the latter nominally warranted as "Poke-Resistant"—for a claimed frequency response of 56Hz–48kHz. Each lucky driver gets its own internal 25W amplifier, and the lucky owner gets a volume control, adjustable EQ settings, a minijack for use with a portable music player, and RCA and XLR input jacks. When fed from the similarly inexpensive iFi nano iDSD DAC, the Tannoys impressed ML as "damn fun to listen to." (Vol.38 No.9 WWW)

Wharfedale Diamond 225: $449/pair $$$ (stands necessary)
Descended from the original Diamond stand-mounter of 1981, the Wharfedale Diamond 225 is a two-driver, two-way speaker featuring a 1" soft-dome tweeter and a 6.5" Kevlar-cone mid-woofer in a 14"-high reflex-loaded box. (The woofer's rear wave speaks to the world through a downward-firing "slot-loaded distributed port.") Entirely manufactured in China, the Diamond is specified as having an electrical sensitivity of 87dB and a nominal impedance of 8 ohms (4.2 ohms minimum). HR described the Diamond 225—he said it responded well to biwiring—as capable of displaying both "highly sensuous, richly colored piano tones" in Debussy and "easy clarity and ambitious drive" with Metallica. The Wharfedale also played orchestral music "with the supplest, non–hi-fi, nonmechanical sounds imaginable," although, with some recordings, it exhibited a "modicum of puffy vagueness in the lowest and highest octaves . . . traits [that] robbed the Diamond 225 of some precision, sharp focus, and punch." Writing from his test bench, JA was impressed overall, observing that "the Wharfedale Diamond 225's impressive measured performance lives up to what I expect from this classic British brand." In the June 2017 issue, KM seconded Herb's recommendation, declaring the Wharfedale "accurate, dynamic, and explicit." Three months later, the otherwise Kevlar-averse AD praised the Wharfedales for their surprisingly good top-to-bottom balance, their good drive and presence, and for being such an easy choice: "The Wharfedale isn't transcendent; it's just darn good, and an exceptional value." (Vol.40 Nos. 3, 6 & 9 WWW)

D

Audioengine A2+: $249/pair $$$ (stands optional)
At the end of 2013, Audioengine replaced the A2 ($199/pair) with the A2+, the only apparent differences being that the latter costs $50/pair more and, per JA, "adds to the left, master speaker a USB 1.1 input for digital audio and a pair of output jacks, used to feed an unfiltered, unequalized signal to the subwoofer(s)." JA compared the new speaker with its predecessor, confirmed that they sounded "identical," and added, "I was impressed by how well these tiny speakers managed to fill my listening room with sound." His new measurements noted that "the A2+'s farfield response . . . is identical to the A2's." He concluded, "A heck of a speaker at a heck of a price!" (Vol.37 No.9, Vol.38 No.4 WWW)

Sjöfn HiFi (the clue): $999/pair (stands necessary)
A perennial attraction at audio shows, Sjöfn's idiosyncratic The Clue is a small, stand-mounted, reflex-loaded speaker designed to be placed near room boundaries. It has a 0.875" silk-dome tweeter and a 5.5" plastic-cone woofer, and boasts a sensitivity of 87dB/W/m and a nominal impedance of 6 ohms. Stands ranging in height from 19" to 22" are recommended. HR auditioned a variety of records through the Sjöfns, and had strong praise for their "smooth and seamless" upper mids and lower treble range: Their speed and definition were impressive. But an apparent discontinuity in The Clue's upper-bass response resulted in a lack of weight and body in many vocal and instrumental sounds. In the end, HR expressed frustration: "I couldn't find a way to really enjoy my listening time while The Clues were in the system." JA's measurements confirmed the speaker's specified sensitivity, but suggested that The Clue's nominal impedance went a bit lower than 6 ohms. (Vol.38 No.1 WWW)

Wharfedale Diamond 10.1: $349/pair ★ (stands necessary)
The Diamond 10.1 is a simple, two-way, stand-mounted design with a 1" soft-dome tweeter, a 5" Kevlar-cone mid/bass driver, and two rear-firing ports. Its gorgeous cabinet is gracefully curved, widening at the center and tapering toward the rear to both minimize internal standing waves and enhance the speaker's fine appearance. The Diamond 10.1 had a relaxed, coherent overall sound, with a wide, deep soundstage, airy highs, a liquid midrange, and excellent low-level resolution. Compared to the PSB Alpha B1, the Wharfedale lacked transient speed but offered greater clarity and resolution, said SM. BJR was impressed by the Wharfedale's extended highs, detailed midrange, and clean bass. "The 10.1 presents extraordinary value for money," he concluded. Compared to the Pioneer SP-BS22-LR, the Wharfedale had a warmer overall sound with more delicate highs and a richer midrange, but lacked the Pioneers' image focus and clean attack transients, said SM. "The Wharfedale Diamond 10.1 remains my favorite affordable stand-mounted loudspeaker," he concluded. "For the price, I'm not sure you can do better." JA noted superb measured performance. (Vol.34 Nos.2, 4, & 10; Vol.36 No.10 WWW)

E

Dayton Audio B652: $39.80/pair !s (stands necessary)
The least expensive loudspeaker Stereophile has ever reviewed, Dayton Audio's B652 is a very small (11.8" H by 7" W by 6.5" D), very light (5.8 lbs), two-way, sealed-cabinet design with a 0.6" ferrofluid-cooled polycarbonate-dome tweeter and a 6.5" polypropylene-cone mid/woofer. The simple MDF cabinet is clad in black vinyl and has a removable grille of black cloth. Though it lacked overall clarity, extension, and control, the B652 offered a surprisingly large soundstage, good image separation, and a very fine sense of momentum and flow, with no hint of temporal distortions, said SM. Given its low price, the B652's measured performance was "quite remarkable," said JA. Dayton Audio B652-AIR ($59.80/pair) replaces the dome tweeter with a folded-ribbon unit and was also impressive. "Recommended for those looking for the least-expensive way to share our enthusiasm for recorded music," JA summed up. (Vol.36 No.1, original WWW; Vol.38 No.2, AIR WWW)

K

GoldenEar Triton Reference, TAD Micro Evolution One, Vivid G1 Spirit.

Deletions
Dynaudio Focus 200 XD, Larsen 8, Emotiva Audio Airmotiv 4S, Nola Metro Grand Reference Gold, Vivid G3 Giya replaced by new versions; Monitor Audio Silver 8, Wharfedale Jade 3, no longer available; ATC SCM19 v.2, Audioengine 5+, GoldenEar Technology Aon 2, Joseph Audio Pulsar, Marten Django XL, Pioneer SP-BS22-LR, PSB Alpha PS1, PSB Imagine T2, Sonus Faber Venere 1.5, Sony SS-NA2ES, Stirling Broadcast LS3/6, Volti Audio Vittora, Wharfedale Diamond 10.7, all not auditioned in a long time.

COMMENTS
tonykaz's picture

Does anyone own any of these Recommended pieces?

If so,

Can you tell us about it?

Tony in Michigan

ps. I own the Sennheisers which are Superb *

chrisstu's picture

I did head to head comparisons versus Berkley, EMM, Ayre....for me in my system the Bricasti beat the Ayre and Berkley and tied with the EMM for far less money. Their support has been OUTSTANDING as well. I had an issue with one channel and they took it back and performed upgrades on it to make up for the inconvenience. As other new upgrades come out they are great about retrofitting to the latest. Great sounding device. Great support.

SpinMark3313's picture

VPI Classic Signature with SDS power box, SoundSmith MIMC (OK, not the "star" edition), EAR 834P phono pre. In all a lovely, lovely set-up - fast, musical, extended, glorious mid-range. I am officially off the analog upgrade train except for some possible upgrades to the EAR in the future (some vintage Telefunken tubes have already taken it to a whole new level).
Once you figure it out and get a few of the right tools, the VPI 3D arm is not that difficult to set up and the on-the-fly adjustable SRA is terrific.
Interestingly, the Classic Signature drew my attention due to years of mostly good VPI coverage in Stereophile, the EAR came by dealer recommendation and audition, and the SoundSmith was a shot in the dark based on my intrigue with the moving iron concept, and the speed of the "moving coil" version. Turned out to be a wonderful combination...

Briandrumzilla's picture

I know you guys hate digital but surely the Sony Play Station 1 has not been reviewed in a long time. It has been on the recommended list for what seems like forever. Other components are deleted after a few years. Get over it. Your precious analog won.

DougM's picture

It would be much easier to read the reviews of recommended components if there were links to them in the recommended listings, rather than having to scroll through past reviews to find them.

Tempo's picture

I thought the Pono Player was discontinued last Spring. It seems to be still available through some retailers, but shouldn't the company's decision to change directions at least be mentioned?

woodford's picture

there's a typo in the price, or at least an extra digit. it's not a $10k cart.

ivayvr's picture

I noticed that the price of NAD D3020 is still shown as $ 499. For the last two years or slightly longer, the actual price for the D3020 was $ 399.99.
At the same time, we were duly notified about the price drop for the very next entry, PS Audio Sprout to $ 499. That is creating a false impression that they cost the same.

syj's picture

"For the DragonFly Black, output voltage has now dropped from 1.8 to 1.2V, but in the DragonFly Red—which also has the distinction of an ESS Sabre 9016 DAC chip with 64-bit digital volume control—output voltage is bumped up to a healthy 2.1V, which AQ suggests better suits it to drive difficult headphone loads."

I think the DAC chip in the Dragon Red is ESS Sabre 9018 (9016 is in the Black).

Also, IMHO, the iFi Nano DSD LE is far far better than the Dragon Red
in terms of sound quality via the Amplifier (with Foobar2000 as the
source). I have both of them. So good that I bought another iFi Nano LE

to use with my other system. The problem of the Nano LE is that the
USB port isn't really secure when I accidentally move or touch the USB
chord it may stop playing. This happens with both units with either USB2.0 or USB3.0 cables.

ednazarko's picture

One of my Dragonflies found another home after I heard an iFi Micro-iDSD black version. Bit of a price difference there, but having recently heard the Nano DSD black version, I was hard pressed to find a lot of difference between it and the Micro-iDSD. the other Dragonfly was shooed from my travel desktop system by the Meridian Explorer 2. No contest.

icorem's picture

Compared the list to the last one + deletions and there is no trace to the Vivid Audio g3.

GustavoS's picture

How come that ATC SCM 19, "the only speaker most people will ever need. Well done. Highly recommended" in the March Recommended Component Lists, is delisted in the new edition! Being so spectacular, was it impossible to ask for a new pair?

John Atkinson's picture
GustavoS wrote:
How come that ATC SCM 19, "the only speaker most people will ever need. Well done. Highly recommended" in the March Recommended Component Lists, is delisted in the new edition!

As it say in the introduction to the listing, if we haven't had continued experience with a product more than 3 years after the review was published, it is deleted. John Marks reviewed the SCM19 in June 2014, hence its removal.

John Atkinson
Editor, Stereophile

rudy457's picture

i noticed that you have placed the Rega Brio in Class C and the Cambridge Audio 851A in Class B? the Rega is truly superior. i auditioned both and bought the Brio.. the Cambridge sounded dull and did not have the speed of the little Brio. this of course translates to the ability of the amp to handle transient attacks hence rhythm, and timing. a very engaging amplifier and a excellent all rounder, from rock to Ravel. i have not heard SS at this price level that can beat it.

jutell's picture

I have owned and tried to use this product for about 2 years. Every time I put it in my office system the soundstage disappears and the left channel loses clarity. This happens both listening through my inexpensive Pioneer speakers or my Stax SR-40's. Sorry Audioquest this item is a bust to my ears.

X