Piega Premium Wireless 701 wireless loudspeaker system Specifications

Sidebar 1: Specifications

Piega 701 wireless active loudspeaker: Two-and-a-half–way active, reflex-loaded loudspeaker system. Drive-units: LDR 3056 ribbon tweeter; (2) 140mm MDS midrange/bass. Frequency range: 34Hz–35kHz. Amplifier power: 200W. Inputs: Wi-Fi and unbalanced analog line-level (RCA).
Dimensions: 41.7" (1060mm) × 7.1" (180mm) × 9.1" (230mm). Weight: 62lb (28kg).
Finishes: Anodized, Black, White.
Serial numbers of units reviewed: 8192, 8194. Designed and built in Switzerland.
Price: $7495/pair. (For US market, price includes one Connect). Approximate number of dealers: 10. Warranty: 6 years.

Piega Connect: Control unit for speaker's wireless playback; Fixed or Variable volume control. Analog input: unbalanced (RCA). Digital inputs: S/PDIF RCA, TosLink. Analog output: unbalanced (RCA). Bluetooth: aptX, A2DP, A VRCP. Wireless frequencies: 5.2GHz, 5.8GHz, 2.4GHz. Wireless data transmission: White and blue groups: 24 bits/48kHz, red group, 24 bits/96kHz.
Dimensions: 1.3" (33mm) × 6.4" (162mm) × 6.6" (167mm). Weight 1.4lb (0.65kg).
Serial numbers of units reviewed: H193connect B00431. "Designed in Switzerland, Assembled in China."

Manufacturer: Piega SA, Bahnhofstrasse 29, CH-8810 Horgen, Switzerland. Tel: +41 44 725 90 42. Web: piega.ch. US distributor: MoFi Distribution, 1118 W. Bryn Mawr Ave., Chicago, IL 60660. Tel: (312) 738-5025. Web: mofidistribution.com.

COMPANY INFO
Piega SA
US distributor: MoFi Distribution
1118 W. Bryn Mawr Ave.
Chicago, IL 60660
(312) 738-5025
ARTICLE CONTENTS

COMMENTS
Bogolu Haranath's picture

May be JM could also review the B&W Formation Duo wireless speakers, under $5,000/pair, including stands ...... B&W also sells Formation Audio, a Connect like box for additional $700 :-) ......

JRT's picture

It might have been intetesting to compare active to passive, this "Piega Premium Wireless 701" active DSP filtered loudspeaker compared to the "Piega Premium 701" conventional passive loudspeaker connected to suitable electronics with neutral sonic character.

Bogolu Haranath's picture

True ... The ribbon tweeter in this Piega seems to have some problems as the measurements show ..... B&W Formation Duo uses conventional dome tweeter ..... B&W may not show those tweeter problems :-) ......

Bogolu Haranath's picture

B&W formation Duo is also about $2k less expensive, (even adding the Formation Audio box) than the Piega wireless speakers :-) .....

JulieAudiophile's picture

Hi Bogolu, thanks for your suggestion. I'd be interested in hearing this system.

Bogolu Haranath's picture

Is that wheeled cart with all those bottles in the JM's listening room? :-) .......

JulieAudiophile's picture

Haha. No, it isn't. That photo was supplied.

remlab's picture

One of the most intriguing speakers out there, and would be a real treat to get Piega to submit a pair for review. Hopefully it would perform better on the CSD than this one did, though.
As a side note, it takes 8 hours to hand assemble just one coaxial drive unit!

JRT's picture

https://www.stereophile.com/content/piegas-new-loudspeaker

smileday's picture

I think normalizing to response on tweeter axis is not good, especially because the response on tweeter axis is not shown to readers. What is shown to readers is an alleged on-axis response averaged across 30° horizontal window.

lenslens007's picture

Once you have got used to hi-res music, and have a system that uses high frequency time-accurate reproduction, you would not want to go back to the low bandwidth and jitter introduced by using a TOSLink connection to push digital audio, rather than using a USB audio connection to pull audio, jitter free.

X