Phono Cartridge Reviews

Sort By:  Post Date TitlePublish Date

Shure V15-III phono cartridge

The Shure V15-III is the latest of Shure's top-of-the-line "Super-track" pickups, earlier versions of which we scorned because of their dished-down response in the 6kHz range and their consequent "dead" sound. (We were unimpressed with Shure's suggestion that the pickup cable capacitance be increased to a total of around 300pF, since few audiophiles are equipped to measure either cable capacitance or frequency response).

Shure M75E phono cartridge

This is one of Shure's new generation of pickups with "trackability" that grew out of research on the Type II V-15 pickup.

At first glance, the V-15-II and the M75E are physically identical. They're the same size, the same shape, and almost the same weight (the M75E weighs 0.8 grams less); and both of them have the same neat little hinged cover that flips down to protect the stylus when the pickup's not in use.

Lyra Atlas SL and Etna SL phono cartridges

My 0.56mV-output Lyra Atlas moving-coil cartridge ($11,995) has put in four years of heavy-duty use. But not long ago I began to hear some problems with sibilants from records that previously hadn't given me trouble in that department. Lyra's Jonathan Carr and Stig Bjorge suggested I bring my Atlas to the 2016 Consumer Electronics Show, held last January in Las Vegas, where they would exchange it for a new one.

Robert Deutsch Upgrades His Record Player

For some time now, I've been thinking that my record player was due for an upgrade. My Linn LP12 turntable and Ittok LVII tonearm are about 25 years old, and my AudioQuest AQ7000nsx cartridge is going on 15. During that time, my listening has become increasingly dominated by CDs, but I am not yet ready to give up on LPs. Updating my LP12—for which I have Linn's Lingo power supply but no other upgrades—would involve installing the Keel subchassis, for $3250—for which price I could get another maker's new, current-design turntable and still have the LP12 to sell. The Linn Ittok can't be upgraded, and its replacement, the Ekos SE, costs $4950—out of my range. AudioQuest no longer makes cartridges. Examining my AQ7000nsx's stylus under a microscope showed no visible wear, and there was no obvious audible problem that could be traced to the cartridge's suspension, but age must be having some sort of effect. Taking all these factors into account, I decided to replace my entire phono front end.

Shure V15-IV phono cartridge

The Shure Brothers have been making magnetic cartridges since the early 1950s (they had been exclusively microphone manufacturers prior to then), and their continuing R&D program has resulted in new, improved models every few years rather than every 6 months (as seems to be the rule these days). As a result, Shure has the appearance, to most audiophiles, of a stodgy, plodding, rather "establishment" manufacturer that can be trusted to make a solid, reliable product but nothing brilliantly innovative or—for that matter—nothing remarkably good either.

Audio-Technica AT-OC9 phono cartridge

While the AT-OC9 bears the Audio-Technica logo, you won't find a sample of this moving-coil cartridge at your friendly Audio-Technica dealership. The US distributor of Audio-Technica products has apparently decided that their market does not include high-end cartridges. A quick perusal of the latest Audio directory issue (October 1988) lists the most expensive AT cartridge at $295, with no moving-coils in sight. When I first heard of the AT-OC9, the only reasonably accessible source, short of Japan, was Audio-Technica in the UK. A quick phone call and follow-up letter resulted in a review sample. Since that time, Music Hall in the US importers of the Epos loudspeakers, among other items) has begun importing the AT-OC9 (along with the less-expensive AT-F5). Mail-order company Lyle Cartridges also stock it, I believe.

Analog Corner #236: Clearaudio Maestro V2 phono cartridge

Clearaudio began making moving-coil cartridges in the 1970s, and only later got into the moving-magnet business. Moving-magnet cartridge designers must now be mindful that most of today's tonearms are of medium to high mass and that therefore, to be compatible, their MMs must be of low to medium compliance and of higher mass than those of the 1960s and '70s.

Kiseki Blue Goldspot Phono Cartridge

666kiseki.jpgKoetsu. Kiseki. Keebler. Products from all of these firms are shrouded in at least a bit of mystery. Do I believe that Koetsu cartridges are hand-built by an octogenarian samurai swordsmith, or that Kisekis are imported from the planet Vulcan, or that Keebler's cookies are baked by elves? Not really. But it does help to liven up the domestic audio scene.

"Look, son—see what Scottie just beamed down."

"Gee, Dad, it's big and blue with a gold spot on the front, and it kind of looks like a cartridge."

"Nice guess, son. No ordinary cartridge, this one. Let me tell you about the Vulcan analog freak in Hong Kong..."

Lyra Atlas MC phono cartridge

At the 2012 Consumer Electronics Show, I spoke with Lyra's Jonathan Carr about the Atlas. He told me that, rather than having started as a blank sheet of paper, the Atlas is an outgrowth of the Kleos ($2995), which I reviewed in January 2011, when I thought it Carr's best balanced design yet, even if it didn't have quite the resolution of the Titan i. Like the lower-priced Delos ($1650, reviewed in August 2010), the Kleos included Carr's New Angle technology, which mechanically aligns the coils to be perfectly positioned relative to the front and rear magnets when the stylus is in the groove.

London (Decca) Jubilee/Reference phono cartridge

London phono cartridges still carry the famous Decca name (even if only in parentheses), but they are now produced by John Wright, a precision engineer and ex-Decca employee. Wright (not to be confused with his IMF and more recent TDL loudspeaker-designer namesake) was assigned the rights in 1989 by Decca's Special Products division (footnote 1), when the company's new owner, Racal, decided that they didn't want to be involved in the manufacture of audio equipment. Wright worked for 20 years in Decca's phono-cartridge division, where he gained a wealth of experience. As well as manufacturing the current range of London cartridges, he is also responsible for servicing and overhauling older Decca models.
Advertisement
Advertisement
Advertisement