
search
Description: Single-ended tubed monophonic power amplifier. Tube complement: one each CV1673, 3A/110B, 300B, 5U4G. Output power: 10Wpc into 8 ohms at 1kHz (10dBW). Input sensitivity: ca 0.6V for rated power. Input impedance: 100k ohms. Output impedance: 8 or 16 ohms (selectable). Damping factor: 4.7 at 1kHz into 8 ohms. Voltage gain: 24dB. Distortion: 0.5% at 1kHz into 8 ohms, 2.83V output. Frequency range: 20–20kHz, flat.
Dimensions: 17" (435mm) W by 9.5" (245mm) H by 12.5" (320mm) D. Weight: 44 lbs (20kg).
Serial numbers of units reviewed: 24035, 24036…
Analog Sources: Garrard 301, Thorens TD 124 turntables; EMT 997, Schick tonearms; Ortofon SPU, EMT TSD 15 70th Anniversary & OFD 25 pickup heads, Miyajima Premium Mono BE cartridge (in Yamamoto headshell).
Digital Sources: Wavelength Proton USB D/A converter; Apple iMac G5 computer running Apple iTunes v.10.2.2, Decibel v.1.0.2 playback software; Sony SCD-777ES SACD/CD player.
Preamplification: Auditorium 23 Standard (SPU version), Robyatt Mono, Silvercore One-to-Ten step-up transformers; Shindo Masseto preamplifier.
Power Amplifiers:…
The measurements of the Allnic A-5000 DHT (serial no.24036) were performed with Stereophile's loan sample of the top-of-the-line Audio Precision SYS2722 system (see the January 2008 "As We See It," and www.ap.com). The needle of the front-panel bias switch rested on the C of the Allnic logo, which is within the limits for output-tube bias current. I didn't need to adjust it, therefore.
The voltage gain into 8 ohms for single-ended sources was both on the low side for a power amplifier, and slightly lower than specified, at 23.7dB from the 16 ohm output-…
At one point, after the review was published, I invited my…
Description: Two-and-a-half-way, ported floorstanding loudspeaker. Drive-units: 1" (25mm) C-CAM gold dome tweeter, 6" RST mid/woofer, 6" RST woofer. Crossover frequencies: 700Hz LF, 2.7kHz MF/HF. Frequency range: 38Hz–35kHz. Sensitivity: 90dB/W/m. Nominal impedance: 6 ohms. Maximum SPL: 114.8dBA. Power handling: 125W RMS. Recommended amplification: 40–125W RMS.
Dimensions: 35 5/8" (905mm) H by 1013/16" (275mm) W by 123/16" (310mm) D (includes plinth and feet). Weight: 36.13 lbs (16.4kg).
Finishes: Black Oak, Natural Oak, Walnut, Rosenut (all real wood);…
Analog Sources: VPI TNT IV, Rega Planar 3 turntables; Immedia, Syrinx PU-3 tonearms; Koetsu Urushi, Clearaudio Virtuoso Wood cartridges.
Digital Sources: Lector CDP-7T, Creek Destiny CD players.
Preamplification: Vendetta Research SCP-2D, Creek Destiny phono stages; Audio Valve Eclipse line stage.
Integrated Amplifier: Creek Destiny.
Power Amplifier: Audio Research Reference 110.
Loudspeakers: Epos M5i, Dynaudio Excite X12, Monitor Audio Silver RS6.
Cables: Interconnect (all MIT): Magnum M3, MI-350 CVTwin Terminator, MI-330SG…
I used DRA Labs' MLSSA system and a calibrated DPA 4006 microphone to measure the Monitor Audio Silver RX6's frequency response in the farfield, and an Earthworks QTC-40 for the nearfield responses. The Silver RX6 is specified as having a voltage sensitivity of 90dB/W/m. My estimate was slightly lower, at 88dB(B)/2.83V/m, which will not be a problem. The RX6's impedance (fig.1) remained below 8 ohms over most of the audioband, with a minimum magnitude of 4.35 ohms at 160Hz; this speaker will work best with 4 ohm–rated amplifiers and receivers. Fig.1 was taken with…