Looking for a CDP that can also act as DAC for my Squeezebox 3. (I've already tried the Cambridge Audio 840C & passed.) I'd like the sound to be a touch on the musical/warm side... maybe there's a non-upsampling model that has digital input?

Thanks!

Anyone hire a welder to make speaker stands for them?

I am considering this route because shipping to HI is so expensive if I buy nice stands from the mainland.

I figure I can give the dimensions of the top/bottom plates and some kind of column (box or circular) to a welder and have them craft it. I will probably also ask for a hole to be cut out in the rear of column to fill with sand for added mass. Then I will spray paint the stands black.

Should the top plate dimensions be larger than the speaker dimensions, less, or fit the speaker exactly?

The Freudian Id Stereophile Forums.

Happy 040108!

Warning about the translator site, etc...

OK, I got the SET bug.

Today's the day I hook up my new SET 2A3c amp.

The amp is three watts per channel, well, four with 10% THD.

I'll be using it with some Apogee ribbons. The Apogee dips to one ohm resistance, and is 86dB 'sensitive.'

So, if 1 watt gives me 86 dB, but the amp output doubles its output with every halving of the resistance, then...

My four watt amp should give me 8 watts at four ohms, 16 watts at two ohms, and 32 watts at one ohm.

Therefore...

Hola,

I decided to finally take the plunge and biamp my Lowther DX-3's.

I went out and overspent on a new SET using genuine Western Eclectic 300B's, but now I can't for the life of me find where the tweeter hook ups are on the damned speaker.

I mean, I can find the main speaker hook up, and it looks almost like to goes right the the back of the speaker cone...but I can't find where the woofer and tweeter part diverge so I can hook up the two amps.

A little help?

We at D.A.R.T.[Definative anal retentive technology] have developed with much help from Sterophile beta testers. Our new isolation unit to fully decouple audiophile from listening room. Our zercron incrusted spiked isolation chair features a highly polished chrome isolator mounted to center of isolation chairs seat. Audiophile sits on mount rotates slightly till well seated. Deep detailed pure sound will be your reward. Get one while its hot;) And happy april 1st

After reading the new issue of Stereophile and going through the recommended gear i find it some what strange that a Tri Planar arm has not been reviewed by your rag. What gives.