Sutherland Engineering Little Loco phono preamplifier Specifications

Sidebar 1: Specifications

Description: Solid-state, current-mode phono preamplifier. Inputs: one pair, RCA. Outputs: one pair, RCA. Cartridge loading: n/a. Gain: 10k ohms at 1kHz, ±6dB. Power consumption 12W.
Dimensions: 17" (432mm) W × 2.0" (51mm) H × 13" (330mm) D. Weight: 15lb (6.8 kg) net, 18lb (8.2 kg) shipping.
Serial number of unit reviewed: 2759.
Price: $3800. Approximate number of dealers 7. Warranty: 5 years, transferrable.
Manufacturer: Sutherland Engineering, 455 East 79th Terrace, Kansas City, MO 64131. Tel: (816) 718-7898. Web: sutherlandengineering.com.

COMPANY INFO
Sutherland Engineering
455 East 79th Terrace
Kansas City, MO 64131
(816) 718-7898
ARTICLE CONTENTS

COMMENTS
Anton's picture

If it weren't for streaming, I would have never engaged with a computer to interface with my Hi Fi. Download, Winn this AFLAC that...I was never gon' do it.

Now, this carn sarned complicated stuff hits me right in my 12 inch!

So, to use this preamp, I need a random cartridge, chosen in the hope that maybe it will work with my system, perhaps, and also get a different wiring set up for my tonearm...as you say: "The shield and ground of the phono cable must be isolated from the plus and minus conductors, which eliminates certain cables and tonearms from consideration. There's nothing a user can adjust to optimize the circuit for a certain cartridge—no adjustment of load resistance, in other words. You're almost entirely limited to moving-coil cartridges, and apparently, even among moving-coils, some combinations don't work at all. Got a cartridge you want to use? Plug it in, hold your breath, and see what happens."

That is so inconvenient, I don't know how us vinyl aficionados can resist!

Whole new layers of inconvenience, expense, and complexity.

Sign me up!

I would buy this if it were plug and play...can we beg a primer on how the Hell to get a system ready to install this crazy thing?

Ortofan's picture

... caliber should settle for nothing less than the CH Precision P1/X1 combo. It has both voltage and current mode type inputs, so that you can switch back and forth between them in search of the ultimate sound quality until you drive yourself silly.

https://www.ch-precision.com/en/products/source/p1
https://www.ch-precision.com/en/products/extra/x1
http://ch-precision.com/images/reviews/1704_Stereophile_P1.pdf

Bogolu Haranath's picture

The Rolexs of phono pre-amps .......... CH Precision and Soulution (see TAS review, Soulution 755) ......... Swiss Precision :-) ...........

Bogolu Haranath's picture

"Drive yourself silly" and get into a nervous breakdown :-) .........

Michael Fremer's picture

I own the P1/X1 and it's far more costly than the Little Loco...it's an unfair comparison.

Bogolu Haranath's picture

Parasound Halo JC3+ phono pre-amp ....... $2,995, Stereophile Class-A :-) ...........

Anton's picture

Think you'd be able to tell them apart by listening?

Saying something like "Nagra BPS: $2459 phono preamp, Stereophile Class A :-)" is meaningless.

Bogolu Haranath's picture

I don't know ...... You can read the reviews and decide ......... JC3+ provides several user adjustments in the back panel ....... It would be nice if, Stereophile did a comparison review :-) .........

Bogolu Haranath's picture

HR said " ... best commercially available phono pre-amp, I have used - Period" about JC3+ :-) ........

Anton's picture

Did you buy it?

Bogolu Haranath's picture

I no longer listen to any analog playback gear (sad!) ........ I was trying to make some helpful suggestions to fellow comrades (audiophiles) :-) ........

JRT's picture

All of the sound propagated from your loudspeaker is analog, regardless whatever you are using upstream. The output of the low pass demodulation filter in your digital to analog converter is analog.

JRT's picture

The transimpedance amplifier provides extremely low load impedance at its input.

Phono cartridges have an optimal load impedance for flat response to high frequency. Jim Hagerman provides a good explanation at the following link.

http://www.hagtech.com/loading.html

Stereophile has provided an industry profile of Jim Hagerman at the following link.

https://www.stereophile.com/content/industry-profile-jim-hagerman-hagerman-audio-labs

JRT's picture

https://www.electronicdesign.com/analog/whats-all-transimpedance-amplifier-stuff-anyhow-part-1

JRT's picture

https://www.passdiy.com/project/other/zen-i-v-converter

Mökö Koo's picture

http://www.hagtech.com/loading.html

Sadly mr. Hagerman makes an error. Formula for Ropt should be:

Ropt = √(L/C)/2.

Without the divider 2 we get peaking frequency response with ringing in the time domain.

Graham Luke's picture

...The cleanest industrial design chic yet!

JRT's picture

As an alternative, one might try using a Bob's Devices Cinemag Sky to step up the voltage and provide impedance matching between a moving coil phonograph cartridge and a moving magnet phonograph preamplifier.

https://www.bobsdevices.com/product-page/sky-cinemag

Similar:
https://www.stereophile.com/content/bobs-devices-cinemag-1131-phono-transformer

JRT's picture

RIAA filter ... phono equalization

http://www.hagtech.com/equalization.html

Reference inverse RIAA filter

http://www.hagtech.com/pdf/riaa.pdf

Ortofan's picture

... buy a well-designed phono preamp that works with both fixed and moving coil type cartridges.

https://www.lehmannaudio.com/phono-stages/black-cube-se-ii.html

https://www.lehmannaudio.com/assets/products/black_cube_se_II/reviews/EN_review_Hifi_News_02_2010_SEII_screen.pdf

https://www.analogplanet.com/content/lehmann-audio-black-cube-se-ii-mmmc-phono-preamp-reviewed

Bogolu Haranath's picture

Lehmann Audio Decade phono pre-amp ($2,099) was better rated Class-A by Stereophile :-) .........

Ortofan's picture

... only a 3% increase (according to Hi-Fi News) in sound quality, then by all means be my guest.

tonykaz's picture

Everyone can have an Opinion.

The above Summary Opinion needs qualifiers:

Best $3,800 Analog Money Spent for folks that can spend $50,000 a year on audio hobby purchases. ( about $4,000 per month considering Sales Tax )

Circuits like this demand an appropriate Transparent Audio Cable costing near $5,000 for the entry level priced one.

Well, dammit, this Circuit makes ALL phono Cartridges sound wonderful, even cheap ones statement reveals the reviewer's system deficiency, despite the extravagant costs of the gear.

Superb Phono Cartridge transducers have their own unique voice which is beautifully revealed thru well chosen Pre-Amps, is this review suggesting that Today's Pre-Amps with Phono are no dam good?

I'll suggest that it's the Vinyl being played is not so good. ( along with the Pre-Amps being offered )

Superb Vinyl Analog is super Pricy ( and a pain in the Schiit'r ).

Tony in Venice

Anton's picture

Didn't you used to be the world's biggest seller of Monster Cable?

No way I am gonna believe you, dude, You sold your credibility!

;-D

He didn't say it made all transducers sound the same, he said it appeared to allow them to sound better than they did with the other type of phono preamp.

If you found an amplifier that lowered the noise floor of a system, would you say that it made all preamps and sources sound more engaging, or would you think it made all other components sound the same?

I am wondering if you read the review: did you interpret what he said to mean that it made all cartridges sound the same? try it again and read to the end.

tonykaz's picture

Monster's early days. I bought in Deep

You make good points about these things. He does suggest compelling results.

I checked the Sutherland Company's engineering report to find them a detail oriented Vinyl Playback optimiser .

I too worked with optimizing Vinyl playback and had a range of Phono Step-up transformers and amplification devices and circuits.

So, these guys are making MC circuits as did Electrocompaniet ( the best of my era ) , Audio Research and Conrad Johnson, Ortofon with their thousand dollar transformer for their top of the line MC transducer. All the above plus many more Manufacturers going deep into Low output MC step up circuits.

Vinyl now is populated by an obsessive cult ( which I was once a member ).

I suppose that I over-reacted with the reviewer's claim of best $,$$$ spent. ( an extravegent exaggeration , in my opinion )

I'm suspicious of the worshipful Wilson people, wondering how their claims could be relevant for everyman Stereophiles.

I could regret even reading that Sutherland Review, considering my outspoken position against all things Vinyl. The best money spent claim triggered my angst.

Sorry, Mea Copa

Tony in Venice

Michael Fremer's picture

"Vinyl now is populated by an obsessive cult ( which I was once a member."

Olivia Rodrigo fans bought 268,000 copies of "SOUR" last year. Are you saying they are part of an "obsessive cult". Vinyl sales today are driven by young people who enjoy the experience sonically and otherwise.

i find your characterization of a large group of people you do not know quite pathetic. I won't say "offensive" because I'm never offended by foolishness.

Characterizing people you do not know with such a broad brush is best described as a character flaw.

Why you felt it necessary to bring Wilson into this is another character flaw. Sabrinas for instance are within the means of a large percentage of "Stereophiles."

tonykaz's picture

Sour's 286,000 are Album Equivalent Units , not Albums. Most of that number were Digital Downloads.

Sour was an Awards Winning Album

Tony in Florida

Anton's picture

This is all good natured ribbing, of course.

You know the difference between a cult and a religion?

The number of members.

As of this year, vinyl is a bigger 'cult' than CD.

Vinyl is a fun part of the audio hobby, why denigrate it? People enjoy vinyl at all price levels.

Do you troll auto enthusiast forums and admonish people that driving really fast costs millions of dollars so they and their street legal car cult should shut up and shut down their obsession?

Do you whine at wine forums that the finest wines cost tens of thousands of dollars per bottle, so they should quit with the cultish talk about finding great 50 dollar bottles?

Well, maybe you do, but you shouldn't!

;-D

Sit back, enjoy some nice copa and cheese, pop open a fine bottle of wine in your favored price range, and get off the vinyl whiner train.

Or, better yet, do us a big favor....go mewl on the digital review posts about the cult of digital and those 15,000 dollar CD players and 80,000 dollar DAC stacks.

Go tilt at the 50,000 dollar amps, while you are at it! Take down the entire hobby, man!

We all have our points of price ridiculosity. There are times I will agree with you, too! Sometimes, I read show reports that list prices and just shake my head. For fun, watch the show videos and pay extra attention when a manufacturer is asked the price of his piece of kit...there is always a pregnant and embarrassed pause, as if they are wondering if the interviewer will laugh, be outraged, or ask who he's kidding. If these guys were playing poker, we'd own them. They know it's silly, too.

Cheers, man.

Bogolu Haranath's picture

"Music and passion were always in fashion at the Copa .... Copacabana" :-) ..........

misterc59's picture

I may have missed something in these comment sections over time, but I have never seen anyone troll digital on this site. Good luck getting your point across to you know who. I, probably like yourself, listen to most if not all musical mediums (there's a term for what I just said, but don't know what!) Anyway, happy listening, even if it's through a paper 6x9 speaker in a '57 Chevy!

Cheers,
Terry

rschryer's picture

Yep, it's: "polyphonical".

Feel free to use the term liberally. :-)

Michael Fremer's picture

That emission!

Mökö Koo's picture

Using the current-mode in phono amp means that all the cartridge current is sinked by the short circuit in amp's input leaving no current to run in the cable capacitance. As a result the filter that acts on the cartridge signal is now of LR type instead of the usual RCL type. So, what mostly limits the choise of cartridges is the corner frequency of this filter which must be high enough. It is calculated by the formula: f(-3dB) = R/L/(2π), where R,L = resistance and inductance of the cartridge coil. E.g. for Ortofon Quintet Black whose R and L are 5Ω and 6.2µH we get: f(-3dB) = 128kHz. By contrast, for Ortofon 2M Black which is MM cartridge and whose R and L are 1.2kΩ and 630mH we get: f(-3dB) = 303Hz!

Michael Fremer's picture

For a MM cartridge? Not applicable for current mode phono preamps.

Mökö Koo's picture

Well, I just wanted to show why current-mode concept is not working for MM cartridges. Maybe somebody would be interested in the math related.
Greetings from Finland.

X