NEAT Acoustics Iota Alpha loudspeaker Specifications

Sidebar 1: Specifications

Description: Three-way, ported, floorstanding loudspeaker. Drive-units: 2"-high planar-magnetic tweeter, 4" plastic-cone mid/bass driver, 5.5" down-firing paper-cone woofer. Crossover frequencies: 80Hz, 5kHz. Frequency range: 33Hz–22kHz. Sensitivity: 86dB/W/m. Nominal impedance: 4 ohms.
Dimensions: 17.6" (450mm) H by 7.8" (200mm) W by 6.25" (160mm) D. Weight: 15 lbs (6.8kg).
Finishes: American Walnut, Natural Oak, Black Oak, Satin White; others on request.
Serial numbers of units reviewed: IA160015A & B.
Price: $1995/pair. Approximate number of dealers: 25.
Manufacturer: NEAT Acoustics Ltd., 29B Harmire Enterprise Park, Barnard Castle, Durham DL12 8XT, England, UK. Tel: (44) 01833-631021. Fax: (44) 01833-630022. Web: www.neat.co.uk. US distributor: High Fidelity Services, 2 Keith Way, Suite 4, Hingham, MA 02043. Tel: (781) 987-3434. Fax: (781) 949-2998. Web: www.hifiservices.com.

COMPANY INFO
NEAT Acoustics Ltd.
US distributor: High Fidelity Services
2 Keith Way, Suite 4
Hingham, MA 02043
(781) 987-3434
ARTICLE CONTENTS

COMMENTS
mrkaic's picture

As far as I know, this is the first review of Neat speakers that includes measurements. I wonder why.

To my knowledge Neat designs their speakers mostly by ear. This approach does not seem very scientific to me and the poor measurements here are likely the outcome of this process.

I had a pair of Neats, but sold them when I could not find any reviews that included measurements (there was a lot of subjective reviews, but I don't care about those). I simply cannot trust equipment that is not thoroughly measured and it seems that I made the right decision.

Scliff's picture

It's a shame to be so hung up on something so irrelevant as measurements.
If I like the way a component sounds, that's all I need or care about.

mrkaic's picture

It is a shame to be so hung up on something so irrelevant as subjective impressions. If I like the way a component measures, that's all I need or care about.

johnnythunder's picture

Bad food may measure well but may taste like shit. A $5 dollar bottle of wine may measure better than a $50 bottle but tastes like shit. You can have your Consumer Reports level of audio quality but most of us will be very happy listening first and worrying about measurements later. Stereophile is a perfect blend of sometimes corroborating the sound quality of a component based on measurements or telling you to ignore it. We are human beings listening to art. The essence of that is subjective. To deny it or to knock it in others is folly.

mrkaic's picture

Pompous and Rigid?! Is that supposed to refer to me? It is sad that you cannot refrain from insulting me because we don't agree.

Anton's picture

That is the strangest post I have ever seen.

"I had a pair of Neats, but sold them when I could not find any reviews that included measurements (there was a lot of subjective reviews, but I don't care about those). I simply cannot trust equipment that is not thoroughly measured and it seems that I made the right decision."

If, by chance, you happened by them while your system was on, how did you think they sounded?

mrkaic's picture

That is the strangest post I have ever seen.

What a compliment, many thanks. :)

But seriously, I did listen to them and did not like the sound. That is why I started looking for measurements. After not finding any, I ditched the Neats and never looked back.

Anton's picture

You didn't like what you heard, so why would measurements matter?

What if you had liked them, but didn't like the measurement?

Your ears don't rule?

mrkaic's picture

What if you had liked them, but didn't like the measurement?

I would get rid of them, of course. I would feel victimized by poor engineering and/or manufacturing. A component that does not measure well has no place in my home.

Your ears don't rule?

No, please see the answer above.

Pedro's picture

Most magazines don't take measurements of gear they review like Stereophile does, so it's hardly a surprise that this is the first review of these speakers with scientific measurements. But the same can be said about loads of gear, I'm sure...

mrkaic's picture

I agree, measurements are hard to find. I suppose some of the reasons might be cost, lack of expertise by reviewers, or resistance by subjectivist reviewers who seem to be the ruling class of the audio world.

Pedro's picture

Most magazines are just snake oil sellers. Without measurements and any kind of scientific approach they can sell everything they want, including stupid stuff like very expensive cables (even directional ones - ahaha) and so forth.

avanti1960's picture

the complete story of how a speaker will sound but they are hardly irrelevant, especially measured frequency response.
That +5db peak at 100Hz is something that turns me off because I know what it sounds like.
Since this speaker was especially sensitive to room position it would have been interesting to see response plots at some different positions, perhaps getting rid of that peak (if possible).

hhi92010's picture

This looks Old School, I like it!

romath's picture

You wrote: 1) "But once the Iotas were fully broken in, they ended up 14" from the front wall and 95" from the listening chair in my larger room..." and
2) "Moving the Iota Alphas into my nearfield rig, I placed the speakers 12" from the front wall and 85" from my listening chair..."

85", i.e., 7'1" is near field?? You've got to be kidding. The Quad (active) speakers on my desktop, an arm's length away, are near field. And really, other than the room and associated electronics, what makes 7'1" and 7'9" fundamentally different? Very strange.

corrective_unconscious's picture

I'd like to have some definitive reason for it to do so, as a matter confidence in the design staff.

My hearing can vary hour to hour, just as my resting pulse, my attention span, my visual acuity, my lucidity, my testosterone levels, my mood, my digestion, and so on, can. Having basic measurements, especially ones that look at least within the realm of standard, can provide a nice baseline for any subjective impressions. An example is "bad" pair matching over a limited frequency range - measurements will find that flaw faster than my ears will in most instances, I'm sure.

will1's picture

With about 30 hours of run in (Neat recommend 200) and going straight to the positioning suggested here I can't wipe the smile off my face. Powered by a Naim Nap100 and a Cambridge Azur 851n I challenge anyone to find a more enjoyable listen for the money. The mid range is a joy and the treble is stunning. You can rattle the walls but still enjoy at a sensible volume if you have neighbors.

steve59's picture

I heard these speakers at axpona 2018 and really liked what i was hearing. Nothing wrong with a speaker measuring good as long as it sounds good.

X