KEF Debuts New Finishes for Blade One Meta and Blade Two Meta

Sennheiser Drops HDB 630 Wireless Headphones

LATEST ADDITIONS

RMAF 2011

Linn—Rega—Wilson

John Atkinson Oct 16, 2011

A quarter century ago, it was de rigeur for show exhibitors to use a Linn Sondek LP12 as the source. The only Linn I have found at RMAF so far was in one of the Audio Alternative rooms, which was using the fully loaded LP12/Ekos SE/Radikal/Urika/Keel LP player/phono stage with a Lyra Kleos cartridge ($23,905). But with Wilson Sasha W/P speakers ($28,900/pair) hooked up to a Rega Osiris integrated amplifier ($8995) with AudioQuest cables, the sound of Dusty Springfield's "Son of a Preacher Man" from the new APO 45rpm pressing of her classic Dusty in Memphis album was vividly real-sounding.

RMAF 2011

Vandersteen Tréo—"Dimensional Purity"

John Atkinson Oct 16, 2011

"Dimensional Purity" is the promoted benefit of Richard Vandersteen's approach to speaker design, and in one of the two rooms I went into at RMAF organized by Fort Collins retailer The Audio Alternative, the Vandersteen Tréos ($5990/pair) were living up to that promise. Driven by an Audio Research Vsi60 integrated amplifier ($4495) with the source the Bryston BDP-1 digital player and BDA-1 DAC, all hooked up with AudioQuest cable, Mark Isham's Blue Sun reproduced with excellent bass extension and clarity and a laidback but detailed midrange.

RMAF 2011

Hegel DAC

John Atkinson Oct 16, 2011

New from the Norwegian Hegel company at RMAF was the HD11 D/A processor ($1200), which features a 32-bit TI DAC but also a unique impedance-optimizing circuit on one of its coaxial S/PDIF inputs. Single-ended digital audio connections are specified to be 75 ohm transmission lines, explained Hegel's Anders Eitzeid, but not all all datalinks conform to that specification. (The RCA plug is a major source of the impedance mismatch even when the cable itself has a characteristic impedance of 75 ohms.) The impedance mismatch creates reflections that corrupt the integrity of the RF datastream, increasing jitter.

RMAF 2011

DEQX (pronounced Dex)

John Atkinson Oct 16, 2011

I first encountered DEQX when Kalman Rubinson and I reviewed the NHT Xd speaker system a few years back, which featured its digital signal processing to implement its crossover and response optimization. The Australian company was putting on an impressive dem of its HDP-3 standalone processor at RMAF, showing the sound of a pair of Gallo Reference speakers driven by Parasound Halo amplification could be first optimized in both time and frequency domains, then its interaction with the room. DEQX's Larry Owens, shown in the photo, enthused about an unanticipated benefit of the speaker correction was the reduction in loudspeaker intermodulation distortion.

RMAF 2011

Politically Incorrect?

John Atkinson Oct 16, 2011

This was posted on the wall of his RMAF room by one manufacturer who still makes his products in the US. The message seems clear enough, even if it over-simplifies what is actually a complex situationsee my September 2011 "As We See It" on this subject.

RMAF 2011

BorderPatrol Audio Electronics

Stephen Mejias Oct 16, 2011

In the BorderPatrol room, we listened to that company’s beautiful-looking S20 300B single-ended power amplifier ($13,500) and EXT1 preamplifier ($12,250), driving a pair of Living Voice Avatar OBX-RW loudspeakers ($10,895/pair).

RMAF 2011

Soundsmith’s Hyperion phono cartridge (with cactus needle cantilever!)

Stephen Mejias Oct 15, 2011

The Hyperion, Soundsmith’s new top-of-the-line moving-iron phono cartridge, utilizes a cactus needle cantilever. (That’s a cantilever made of a cactus needle.) Inspired by (the always dapper) Frank Schroeder and designed by Peter Ledermann, the Hyperion’s cactus needle cantilever provides both stiffness and damping&#151qualities which, according to Ledermann, had previously been mutually exclusive.

RMAF 2011

Sweet Music from High Water Sound

Stephen Mejias Oct 15, 2011

I live and work only minutes from Jeffrey Catalano’s High Water Sound, but to my shame have never visited the showroom. For no good reason, it’s only at shows like the Rocky Mountain Audio Fest that I get to speak with Jeffrey and enjoy his demo systems. But I’m extremely grateful for that because Jeffrey has outstanding taste in music&#151he has that great ability of connecting the dots between seemingly disparate musical genres and artists&#151and his perspective on hi-fi is fresh, interesting, and distinct.

RMAF 2011

The Thoress F2A11 integrated amplifier

Stephen Mejias Oct 15, 2011

We didn’t listen to the Thoress F2A11 integrated amplifier, but just look at it: It’s awesome.

Entirely hand-built by Reinhard Thoress, the amplifier uses NOS Siemens F2A11 power tetrodes, which High Water Sound's Jeffrey Catalano explained, were popular in the Klangfilm cinema amplifiers of post-war Germany. Three line-level inputs are selectable by a rear-panel rotary switch, while separate volume controls for each channel can be adjusted using carefully matched high-grade rotary potentiometers. Why? I don’t know why, but it’s cool.

According to Catalano, the sound of the F2A11 is crystal clear. It “just cuts through all the BS.” There you go. The Thoress F2A11 looks like some kind of a tank, delivers about 6Wpc, and costs $8000.

RMAF 2011

Ayre's QA-9 A/D Converter

John Atkinson Oct 15, 2011

It looks like the best-selling QB-9 USB DAC until you notice the level meters and the level control next to the display. This is Ayre's new QA-9 A/D converter, aimed at audiophiles who want to rip their LPs with the highest possible quality. The analog input is balanced and there are both USB and AES/EBU digital outputs. The ADC chip is fed by an input stage featuring Ayre's zero-feedback, discrete circuitry and it will output 24-bit LPCM at up to a 192kHz sample rate. However, there's no reason why it couldn't also output DSD data. The QA-9 will be in production in the first quarter of 2012 and while price is not yet decided, it will be somewhere between the QB-9's price and $5000, I was told.