Audioengine Pushes the Envelope
Audioengine is making a name for itself with its extremely affordable powered speakers. But rather than photograph the speakers being demmed at RMAF, I concentrated on the Apple iBook running iTunes being used as the source. "What's that?" I asked, pointing to the dongle.
Avalon Ascendant
After my final hi-rez seminar on Sunday, and triggered by my very positive experience with the inexpensive Avalon NP2 speakers, I went across the hallway to the room Denver dealer HD Home Cinema & AV Design was using to debut Avalon Acoustics' new $9300/pair Ascendant loudspeaker. This combines the composite-dome tweeter from the NP2 with a pair of Kevlar-composite woofers in the angled, faceted enclosure that has become a de facto trademark of the Colorado company's high-end speakers. With Ayre MX-R monoblocks, Ayre C-5xe universal player, K-5xe preamp, and P-5xe power-line conditioner, and wired with Cardas cable, the Avalon system proved one of the best-sounding of the Show.
Balanced Wilsons Honor Frankie
I always make a point of seeking out a Wilson dem at Shows, and in the RMAF room run by Denver dealer Audio Unlimited, I encountered not one but two systems featuring Wilson speakers. The smaller system offered WATT/Puppy 8s driven by Balanced Audio Technology's VK53 CD player and $6000 VK55SE integrated amplifier—compared to its predecessor, this now uses 6BH30 input and driver tubes, sitting on tubed current sources—and sounded sweet indeed. But the real reason to visit this room was to hear the mighty MAXX2s driven by BAT's new Rex three-chassis ultimate preamp, VK600SE solid-state monoblocks and the new Paganini three-box SACD player—transport, clock, DAC—from English company dCS. BAT's Geoff Poor put on Frank Sinatra's Nelson Riddle-arranged "What's New," which Geoff feels is the singer's finest performance. Wow! Mr. Sinatra was there in the room with us.
Big Things in Small Packages
Santy Oropel of Twin Audio Video Inc. of Loma Linda, CA was producing some very nice sound with Triode Corporation’s TRV-A88SE, a KT88-based, 12Wpc, single-ended integrated amplifier ($1800) and TRV-4SE Limited Special Edition tube preamplifier ($2750). Everything save the faceplate and casing is made in Japan.
Come Listen, My Friend
The sweet solidity of the violin beckoned me from down the hallway (which is far more than I can say about some of the rooms I visited). I was hardly surprised to discover that I had been lured by Edge Electronics. Paired with the Tyler Acoustics Woodmere II speakers ($8800 base price, 185 lbs each), the Edge System handled silences wonderfully. That may sound like a backhanded compliment, but I mean anything but. Playing the exquisite Elly Ameling singing Schubert to piano accompaniment, there was a stillness, poise, and grace amidst the living flow of her voice that I rarely experience from sound systems. (I experienced something similar one year in the Joule/Elrod room at CES). On display were the new Edge CD player, whose RAM circuitry is said to perform advance error correction, the G8 amp, and G2 preamp (available with optional battery supply). Actually, passive display was not what was intended. Shipping mishaps from the company's new base in Florida had actually destroyed some of the intended components, which were replaced by older versions of Edge's current models, which Steve Norber lifted from his home system a few miles away.
Desktop Decco from Peachtree
Musical Fidelity/Era Design distributor SignalPath's David Solomon is also interested in the desktop and enthusiastically demmed the new Peachtree Decco for me. The $700 tubed D/A processor/60Wpc integrated amplifier has a rear-panel bay that will accommodate the popular Sonos ZP80 WiFi media player and will take either digital or analog signals to its own, higher-quality DAC circuitry and output stage. It also has a USB input. The revolution is here.
Don’t Let Size Fool You
I really enjoyed the mellow sound created by the USB-input Benchmark DAC 1 and the Studio Electric T3 loudspeakers. The speaker, with its 87dB sensitivity and 4 ohm impedance, is distinguished by the 6.5" broad-band drive-unit, encased in a stainless-steel sphere, that handles frequencies from 50Hz to 4kHz. Although you can see the diminutive silk-dome tweeter in the photo, the side-firing 8" woofer, which handles the single octave from 25–50Hz, is missing from view. Very, very nice.
Esoteric Materials in Esoteric Speakers
I went into the Esoteric room to take a listen to the digital components that build on the performance of the excellent SA-60 universal player that graced our October cover. But my attention was drawn to a pair of elegant loudspeakers sporting the Esoteric name. The Mg20 floorstander ($8410/pair) and bookshelf Mg10 ($5500/pair plus stands) feature tweeters and woofers fabricated from the very light metal magnesium, which is said to have an optimal combination of stiffness and self-damping. It has not been previously used in speakers (other than in alloys) because it degrades with exposure to the air. However, Esoteric collaborated with a British company to develop an effective protective coating.
Fascination
I was utterly intrigued by the innovative speakers from Dr. Shelley Katz’s UK-based Podium Sound ($5995/pair). Katz produces panel loudspeakers that mechanically vibrate via electromagnetic drivers. Inherently free from phase error and less sensitive to placement than electrostats, they operate full-range without any filters.
Genesis Redesigns Model 5 Speaker
As Jason said, I started my coverage of the much-expanded RMAF with the Atrium rooms, and at the corner of the ground-floor level, I encountered Gary Leonard Koh of Genesis Advanced Technologies. Gary brought me up to date on what has been happening with the Seattle company since parting ways with veteran speaker designer Arnie Nudell.