The are small amps, there are large amps, there are stereo amps, there are mono amps, and then there are Vladimir Lamm's ML3 Signature two-chassis monoblocks, demmed at FSI with Verity Lohengrin speakers, a Lamm L2 Reference preamplifier, LP2 phono preamp, NeoDio CD transport and DAC, and Kubala-Sosna cables, and Critical Mass Systems racks.
It has been 20 years since Montreal-based Totem Acoustics made its name with the Model One minimonitor, and the speaker has both remained in production and been featured in <I>Stereophile</I>'s "Recommended Components" listing all that time. I am working on a follow-up of the current production One, but taking pride of place in Totem's FSI suite was the limited-edition Model One Signature ($3595/pair). Only 2000 pairs will be made, and differences over the regular Model One include upgraded drivers, a bevel-edged, mahogany-veneered cabinet stained "root brown," and the WBT connector panel you can see in my photo. Despite the speakers' diminutive stature, the system, based on an Accuphase CD player, Plinius integrated amplifier, and Totem's own biwire cables, filled the relatively large suite with satisfying sound.
One of Gershman Acoustics's dem rooms was next door to my hotel room. I was well aware, therefore, the night before the Show opened, of the pains the Canadian speaker company was taking to get the best sound from their affordable Sonogram loudspeakers (CDN$3695/pair). The result, using a system based on Audio Research CD3 Mk.2 player, LS26 preamplifier, and Reference 110 power amplifier, and Gershman's own cables was impressive.
Something I found fascinating about the Reference 3a Veena loudspeaker that Robert Deutsch writes about below is that it (almost) dispenses with a conventional crossover. The Murata supertweeter at the top is driven directly, as is the 8" woven–carbon-fiber-coned unit beneath the tweeter, which covers the range from 94Hz upward. The soft-dome tweeter is fed via a single capacitor, and the twin woofers have a simple 2nd-order low-pass filter. Tash Goka explained to me that saving money on the crossover allowed the designer to use high-quality internal components such as Bybee Quantum Purifiers, Mundorf silver capacitors, and van den Hul wiring. I agree with Robert that the sound of the Divergent system was surprisingly good.
Tosh Goka of Divergent Technologies always manages to assemble a good-sounding system at shows, and this year's FSI was no exception. The speakers were the Reference 3A Grand Veenas ($8000/pair, which seems very reasonable for the technology and the sound), with Antique Sound Labs electronics and EMM Lab CD/SACD player.
The warm-up phenomenon—where a system sounds better after it's been on for some time, the time being much longer than would be accounted for by anything in the measured performance—is well-known to audiophiles, and it often manifests itself at shows. This was the case with the system in the Avantgarde room: Avantgarde Duo Mezzo loudspeakers ($47,250/pair), Avantgarde One preamp ($37,500) and One power amp ($45,000), with Brinkmann analog and Audio Aero digital front ends. I heard the system early on the first day of the show, and although it didn't sound bad, it didn't sound as great as I'd heard Avantgarde speakers sounding. Could it be the room or perhaps the setup? Avantgarde Acoustics designer Matthias Ruff was on hand; between him and Jody Hickson of Globe Marketing, Avantgarde's new North American distributor, they should have been able to sort out the setup, but the sound was definitely disappointing, being on the dry side, a characteristic I don't associate with Avantgarde speakers.
Red Wine Audio has been expanding their range of battery-powered audio electronics: they have the Isabella preamp, with optional built-in DAC; Signature 30.2 power amplifier, with optional volume control, and Signature 70.2 monoblock amplifiers. The system at FSI used Omega Super Hemp speakers, which use a driver that in the version demoed at the show was equipped with an Alnico magnet structure, and it sounded very nice indeed.
I recently purchased an Onkyo TX-SR805 and am struggling with hooking up my equalizer. I have an ADC SS-315x. Line IN - Line OUT - REC 1 IN&OUT - Rec 2 IN&OUT. I can get my CD player through the EQ but not the recievers tuner.
turntable.
Rega p1
http://www.needledoctor.com/Rega-P1-Turntable?sc=2&category=353
amp.
Music Hall TRIO AM/FM TUNER/AMP/CD PLAYER
http://www.elusivedisc.com/prodinfo.asp?number=MHTRIO
Speakers
EPOS Speakers: ELS 3, Mini Monitor