Ayre showed off their new VX-R stereo amplifier, a stereo version of their lauded MX-R monoblocks. Rated at 200Wpc into 8 ohms the VX-R is priced at $14,950. The amp is a zero-feedback design, featuring fully balanced discrete circuitry. As usual from Ayre, the chassis is beautifully made of milled aluminum. The sound of the VX-R, driving the TAD Compact Reference monitors was wonderful.

Internally, Ayre's new VX-R stereo amplifier features the same carved-from-solid-aluminum chassis construction as the famed MX-R monoblock. And that chassis is packed full!

I met designer Hans-Ole Vitus in his room at the Venetian, where he was showing his new stereo amplifier, the Vitus SS 101 (pictured in the middle, $40,000). The SS101 puts out 50Wpc in class-A and 100Wpc in class-A/B. It also has a volume control, making it a single-source integrated amplifier that can be operated by remote control. The system really sounded great and Hans-Ole was a delightful chap.

At last year’s CES, many of my favorite rooms featured Sweden’s Marten speakers. The same held true this year. I expected good things when I stopped by Marten’s own room at the Venetian. Not only where they showing off the new version of their Coltrane 2 speaker ($95,000/pair) but also their first amplifier design, the M Amp ($45,000/pair). These monoblock amps have scary low distortion—0.05% at 400W into 8 ohms and use a class-D stage that switches at 600kHz. The amp can output 550Wpc into 8 ohms, 1000Wpc into 4 ohms, and 1700Wpc into 2 ohms.

The folks in the Marten room seemed in dire need of some good music when I came in, having suffered through too much audiophile approved crap during the show. I handed them a CD of the XX, a band I love, and we all bobbed our heads to this sparse but funky Pop. I find this album doesn’t work at all if a system cannot get the interplay between the bass guitar and kick drum right. The Marten system did this very well, sounding rich and articulate. The M Amps never let on that they were class-D amps, sounding more like super powerful tubes or a richly voiced class-A amp. I was thanked for playing some sweet cuts off the XX’s album, and I thanked them for making it sound great.

Like the Marten room, the Engström & Engström room also played the new large Coltrane 2 speakers by Marten of Sweden. This year, the Coltrane 2 speakers met The Lars Type 2 monoblock amplifiers ($60,000/pair), which each use two 300B tubes and deliver 36Wpc.

“Biggest. Tube. Ever.” I said, in my best Comicbook Guy voice. The Kronzilla DX Mk.II ($32,000/pair) from KR audio of the Czech Republic uses two T1610 output tubes in parallel to achieve 100Wpc of triode power. The amp also uses zero negative feedback.

In a show dominated by forward-racing technologies and innovative solutions to complement the ways in which we consume media, DeVore Fidelity and Tone Imports continue to find inspiration in old-fashioned pleasures...

The German T+A brand is now being distributed in the US by Dynaudio North America and having only been aware of their electronic products, I was surprised when I went into the T+A room at CES to see a large pair of speakers, the Solitaire CWT2000s ($45,000/pair). However, "I have been designing speakers since the company started," explained T+A's Siegfreid "Siggi" Amft, seen here with his creation.

The speaker features an electrostatic tweeter, 45mm wide but mechanically split into three 15mm-wide sections. as the frequency increases, the crossover increasingly cuts off drive to the outer sections, maintaining lateral dispersion. Adjacent to the tweeter is an array of six 6" cone midrange units, with the higher frequencies mainly being handled by the central units, again to optimize dispersion. Two pairs of 10" woofers complete the driver complem3nt, one pair being mounted each side of the enclosure and driven in-phase so that their reactive forces cancel. The sealed-box alignment is said to give a &#150dB point of 37Hz. Two more, smaller, less expensive Solitaire models will be launched later in the year.

The T+A speakers were bring driven by T+A M10 hybrid monoblocks ($33,000/pair), which use a tube input stage capable of delivering the full output voltage required by the speakers, with then a solid-state current amplifier providing the necessary cone-controlling grunt.

In prior Show reports, we have photographed Tidal's Jörn Janczak standing next to his speakers. But as Jörn stands 6' 8' in his socks, I made him crouch by the Sunray ($151,000/pair). so you can get an idea of how big this bi-amped speaker really is.

As at the 2010 CES, the rest of the system included two BAlabo 500Wpc stereo amps ($77,500 each), and the BAlabo BD-1 24/192 DAC ($37,500). Preamp was the BAlabo BC1 ($60,000) and the source was the Blue Smoke music server. Cabling was by Argento. I listened to a recording that many were playing at CES, piano/bass/drums jazz from the German Tingvall Trio, and was impressed by the effortless sweep of full-range sound produced by this admittedly very expensive system.