Stand Loudspeaker Reviews

Sonus Faber was founded in 1981 by Franco Serblin. Real wood has always featured strongly in the construction of this company's evolving range of costly, compact loudspeaker systems (footnote 1). The first was called the Parva, now in its FM4 form. This was followed by the Minima, a Tablette-sized model. The upmarket Electa came through in the last few years, followed by the Amator-Electa. This series increases in size and weight with each new introduction—for example, the Minima weighed 6kg, the Electa 12kg, the latest Extrema a massive 40kg or 88 lbs.

Following my reports on 13 mainly inexpensive loudspeakers that have appeared in the last four issues of Stereophile, I thought I would give myself a treat this month by reviewing the latest incarnations of a model that has stood the test of time: the two-way Celestion SL600Si...This is a carefully tuned infinite-baffle design, sacrificing ultimate extension for upper-bass and lower-midrange quality. Its crossover is conventionally British in that it puts flatness of on-axis amplitude response ahead of time coherence, while everything about it, from drive-units to the cabinet itself, is flagrantly "high-tech."

This compact, $1600/pair monitor employs many of the same design features found in the company's highly rated Matrix 801 system. Although the price is high for a two-way minimonitor, the 805 fits right into a growing high-end marketplace for such designs, one which emphasizes high quality in a small enclosure which will fit into most living-room environments without calling much attention to itself.

Back in the summer of 1968, I bought a secondhand pre-CBS Fender Precision Bass guitar for the grand sum of £35 (then about $75) (footnote 1). It was so cheap because the previous owner had pretty much scratched the sunburst finish to ribbons. The P-Bass may have looked like roadkill but it played like a dream, so I decided to refinish its body. Paint stripper removed the remains of the original nitrocelloluse lacquer, leaving me with a white wood body—ash, I understand—which I carefully sanded and stained. Contrary to what you might expect, the finish of an electric guitar does have an effect on the sound, so I thought long and hard about how I was going to varnish the body. I ended up applying thinned gloss-finish polyurethane, which I then sanded, repeating this process some five or six times, using finer and finer sandpaper, until the application of a final coat of varnish gave as close to a mirror-smooth finish as I could get...which wasn't anything near as perfect as the piano-lacquer rosewood finish on the samples of the Monitor Audio Studio 6 loudspeaker that Monitor Audio USA sent for review!

These diminutive little sleepers have been available in the US for quite some time but have attracted little attention because (1) they have never really been promoted and (2) they are just too small to look as if they could be worth $430 a pair.