Headphone Reviews

This story originally appeared at InnerFidelity.com

The Solo3 is the first headphones to have the Apple W1 wireless chip. (Followed shortly thereafter by the Beats Powerbeats3 and the soon to come BeatsX and Apple AirPods.) In this review I'll take a close look at the features and functions of this W1 based wireless headphone, and how it differs from typical contemporary Bluetooth headphones.

This story originally appeared at InnerFidelity.com

Ooooooooo baby! If you don't have a Sennheiser HD 600 or HD 650, you need to read this!

This story originally appeared at InnerFidelity.com

Shots fired!

Sennheiser's new PXC 550 ($399) Bluetooth noise canceling headphone is a direct shot across the bow of Bose's battleship Quiet Comfort 35 ($349) dominance of noise canceling headphones, which I reviewed very positively. Not only do Bose own a big chunk of that market, they consistently, in my opinion, have the best isolation and sound quality performance. Let's see if Sennheiser can put a dent in that armored hull.

This story originally appeared at InnerFidelity.com

In this survey, I'll be walking you through my listening experience of these headphones and making comments with in the context of how these headphones compare with each other—I listened solely to them until I compared a few other headphones at the end of the test.

This story originally appeared at InnerFidelity.com

They're certainly a family of headphones...but like any family, there's lots of differences. Small differences in most of the baffle plates and rear damping...could be lots of stuff going on around the driver that can't be seen.

This story originally appeared at InnerFidelity.com

Wireless headphones are hot, hot, hot these days. I'm going to make a concerted effort to cover quite a few in coming months. Here's a start...

The top-of-the-line model from America's leading headphone manufacturer, these are bulky, heavy, very business-like in appearance, and very, very good.

The ESP-9 is dual-powered: from the AC line, or from the input signal itself, The power supply is rather large and heavy, and appropriate in appearance to the phones. Amplifier connections are via wires with spade lugs attached, and speaker connections are made to the rear of the power supply. A front-panel switch selects speaker or headphone operation, and terminates the amplifier outputs with 10 ohms in the Phones position.

Construction is typically top-of-the-line Koss: Rugged, nicely finished, and apparently very durable, and the phones are easy to handle. (Many headphones are so loosely pivoted on their headbands that they swing into impossible positions whenever you pick them up.)