Larry Greenhill

Sort By: Post Date | Title | Publish Date
Larry Greenhill  |  Jan 13, 2013  |  0 comments
Peter Madnick's latest design for Constellation is the Virgo 2 preamplifier ($24,000), which uses an outboard power supply. It was shown with a Cygnus non-streaming Digital File Player ($24,000); Constellation's Centaur stereo amplifier ($28,000), Constellation's Centaur monoblocks ($56,000/pair). The Constellation amplifiers shown in the photo were driving the Magico Q7 loudspeakers ($165,000/pair) in biamped fashion, with a pair of Centaur monoblocks for the woofers, and a stereo Centaur for the midrange and tweeters. The resulting sound was smooth and very well controlled.
Larry Greenhill  |  Jan 13, 2013  |  4 comments
Boulder Amplifiers, Inc., introduced its new Model 3060 Stereo balanced, class-A amplifier ($114,000), a huge, 900Wpc, solid-state amplifier that weighs 450 lbs! Sitting nearby was the company's flagship monoblock, the silver 3060 ($205,000/pair), a class-A 1500W power amplifier shown in my photograph. A large cylindrical tube, containing 4 large mineral-potted toroidal power transformers, runs down the inside middle of the chassis. This is said to dampen any transformer-induced vibration. The mono amplifier uses 120 high-temperature rated bipolar transistors and 48, 160V, high-temperature rated, 4700µuF electrolytic capacitors for energy storage. Large circuit boards slide into frames at the top of the chassis, each board containing hundreds of discrete parts. With a pair of these amplifiers weighing 440 lbs, Boulder does not want this amplifier to require service, and its build quality signifies that.
Larry Greenhill  |  Jan 13, 2013  |  2 comments
At 95 lbs, Dan D'Agostino’s 300W into 8 ohms, Momentum monoblock amplifier ($50,000/pair) doesn’t even come close to the weight of the big Boulders. Featured on the cover of Stereophile’s CES issue, the Momentum could be heard in many rooms at CES. This compact, energy-efficient design was driving the new YG Electronics Sonja 1.3 speakers ($106,800/pair). The resulting sound was dynamic, effortless, open, and had a wide, deep soundstage.
Larry Greenhill  |  Jan 13, 2013  |  0 comments
Bryston's new product line-up for 2013 includes a replacement for its venerable 2B stereo amplifier, the 2.5B amplifier ($2995). Similar to the new BP-17 preamplifier ($3550, see below), the 2.5B amplifier is derived from the amplifier portion of its B-135 SST2 integrated amplifier (see related story). Bryston's James Tanner explained that the upgrade employs a much beefier power supply than its predecessor, allowing it to deliver 135Wpc into 8 ohm load impedances. Bryston's new BP-17 preamplifier ($3550) is derived from the preamplifier portion of its B-135 integrated amplifier, which features balanced outputs and advanced circuitry derived from the SP-3 surround processor. The B-17 closely resembles the B-135, differing externally only in not having heatsinks and speaker outputs on the rear panel. The BP17 utilizes a software controlled, motorized analog volume dial and integrated balance control.
Larry Greenhill  |  Jan 13, 2013  |  2 comments
Bryston showed a static model of its new loudspeaker system, the Model T Signature ($7495/pair), that is specified to handle 50–1100 watts into its 8 ohm impedance, with a frequency response from 25Hz–22kHz, ±3dB. In active form, the Model T uses the AX1 external DSP crossover ($2995), but the passive version’s crossover features large, expensive air-coil inductors, as well as something brand new: Bryston capacitors. Working with Clarity, Bryston's James Tanner specified the exact requirements for these capacitors, which have both company's names featured on their blue exteriors. The Model T benefited from Bryston's close relationship with with Axiom, a speaker design company that has its own large anechoic chamber. The Model T is available in Black Ash, Boston Cherry, or Natural Cherry veneers.
Larry Greenhill  |  Feb 13, 2012  |  3 comments
Although many high-end audio products are described as revolutionary and as breakthroughs in design when new, most audiophile components now on the market have not changed our way of relating to such products in the way the iPad has done. Once in a while, a new audio product does move in that direction by enabling the audiophile to do install a product and optimize its performance in a different way.
Larry Greenhill  |  Jan 19, 2012  |  First Published: Jan 20, 2012  |  0 comments
Thiel and Bryston always share an exhibit area in the Sands Convention Center’s Bassano Ballroom, and this year's CES was no exception. James Tanner, Bryston's upbeat product manager, had gathered a terrific playlist of musical selections on a thumb-drive, which drove the company's $2195 BDP-1 digital file transport, $2195 BDA-1 DAC. Livingston Taylor's whistling on "Isn't She Lovely" opened the playlist, just as it did at the Joseph Audio suite, and many others—it was a common selection at the Venetian exhibits. Sound from the $9500 Bryston SP-3 preamp/processor ($7900), three-channel Bryston 6BSST2 amplifier, Thiel CS1.7 speaker prototype and Thiel USS SmartSub Subwoofer produced soundstage depth and imaging that was among the best, almost as good I heard at the much more expensive system in the VTL suite. Tanner walked me through Bryston's newly announced BHA-1 headphone amplifier featured in the photo ($1295), which is highly versatile, including twin XLR outputs for balanced headphones, and both XLR and ¼ jacks for conventional headphones.
Larry Greenhill  |  Jan 16, 2012  |  0 comments
Ron Sutherland had a rack of his components at CES to drive Vandersteen Quatro floorstanding loudspeakers. The rack consisted of the two monophonic Phono Block phono preamplifiers, recently reviewed by Brian Damkroger in Stereophile; the $15,000 Destination Line Stage (one non-audio signal carrying control unit with Nixie tubes, and one audio chassis for each channel); and the $10,000/pair, 200W monoblock power amplifiers. Except for the amplifier and control chassis, most of these units are configured into two side-by-side subunits—one for power supply and one for audio signal—attached only by front and rear panels.
Larry Greenhill  |  Jan 16, 2012  |  0 comments
Ron Sutherland of Sutherland Engineering taught me all I need to know about Nixie tubes at CES. Used as the main visual display device used in his Reference N-1 preamplifier and in his Destination Line-Stage preamplifier's control unit shown in the photo, the Nixie tube was invented in 1955 as the first electronic display tool for reading out the numbers 0–9. The Nixie's designers fashioned a wire mesh into 9 layers, each layer in the shape of a number, resulting in a tidy small stack. This tiny wire stack was inserted into a small glass envelope, filled with neon gas, and then sealed. When any of the separate metal layers was charged with 175 volts, the neon gas around the wire ionized, and lit up. When plugged into a circuit board, the tube would read out the numbers, with each number appearing at a different depth. Paul was fascinated with the retro look of this type of readout, so he has installed it in his $15,000, three-chassis Destination line stage, and into his new $10,000 reference N-1 preamplifier.
Larry Greenhill  |  Jan 16, 2012  |  1 comments
The Audio Power Labs exhibit took my breath away, Imagine, a huge, beautiful $175,000 per pair, 200Wpc monoblock tube amplifier using 833C, graphite-plate, radio-frequency transmitter tubes that have a bandwidth of 30MHz and run with 1500V on the plates! These tubes were used in the output stage of BCF-1 radio transmitters. Now imagine that the amplifier's designers are named Squeek Rieker (right) and Peeya Iwagoshi (left), and you know why I had to pinch myself to make sure I wasn't dreaming.

Pages

X