Stand Loudspeaker Reviews

It has been my experience that $400 or thereabouts is about the least one can pay for a pair of speakers with the expectation of audiophile-calibre sound.

Small enough to fit in a shoebox, these little darlings from England almost manage to redefine the state of the art in very compact monitor design (footnote 1). Here's a speaker that isn't as neutral as the BBC">http://www.stereophile.com/standloudspeakers/361">BBC LS3/5a compact monitor, but that does manage to equal or exceed that venerable design in most respects.

The Fourier 6 has the special ability to generate large coherent sonic fields, from a box small enough to slip into an ordinary shopping bag. At $499/pair, the 6 competes directly with another remarkable-imaging, compact American speaker, the Spica">http://www.stereophile.com/standloudspeakers/446">Spica TC-50 ($420/pair).

This is a speaker we've been fairly intimate with over quite a period of time. Designed by John Bau, the SC-50i started out three years ago as an inexpensive speaker system ($330/pair) not sold through dealers.

One of the factors allowing it to cost so little was the clever adaptation of cardboard tubes, normally used as forms for pouring concrete pillars, for use as speaker enclosures. They have a number of advantages, other than low cost: their circular form helps eliminate resonance of the back wave within the enclosure; the material is rigid because of its shape, and is non-resonant due to its construction.

This smallish loudspeaker system has been getting high ratings in the English audio magazines for some years but was not available to US consumers until recently, when the small firm (literally a Mom'n'Pop enterprise, footnote 1) arranged for US distribution through Audio International.

The Spendor BC-1 is about as unimpressive-looking as any other smallish three-way loudspeaker, of which there are countless hundreds of models being made in the US at present. In fact, we were so ho-hummed by the mundane appearance of this speaker that we found it hard to connect the pair up and give them a listen.

In the last issue we published a rather enthusiastic "Quickie" report on a small, $190/pair speaker system from a new company—the FMI Model 80. It was virtually devoid of low end, even as a stereo pair (pairing effectively doubles bass output), and slightly rough as well as a shade soft at the high end, but it had a quality of "aliveness" to it that almost defied belief. Was it a breakthrough in design? A new transducing principle? No, it was neither. In fact, the Model 80 looks like any one of those hundreds of little bookshelf systems that clutter, the pages of Stereo Review's "Hi-Fi Directory" in tedious profusion.

Every engineer has known for years that, while beryllium has excellent physical qualities for use as a speaker radiator—light weight, rigidity, and a remarkable degree of internal damping—it is not usable as such because it cannot be stamped out like most other materials. It will not stretch, and any attempt to shape it simply causes it to split.