Back in your Ford Fiesta, its revving engine sounds distant, muffled. Your body can't feel the powerplant's power. In gear, the Ford feels soft and hesitant, not responsive.
That's how Klipsch's highly…
Back in your Ford Fiesta, its revving engine sounds distant, muffled. Your body can't feel the powerplant's power. In gear, the Ford feels soft and hesitant, not responsive.
That's how Klipsch's highly…
Compared to the Harbeth P3ESR
Besides…
Description: Two-way, rear-ported, stand-mounted loudspeaker. Drive-units: 1" (25mm) titanium-dome tweeter with hybrid cross-section Tractrix horn; 6.5" (165mm) Cerametallic-cone woofer. Crossover frequency: 1.8kHz. Frequency response: 45Hz–25kHz, ±3dB. Sensitivity: 96dB/W/m. Impedance: 8 ohms. Power handling: 100W continuous, 400W peak.
Dimensions: 15.7" (400mm) H by 8" (200mm) W by 11.9" (300mm) D. Weight: 16 lb (7.3kg).
Finishes: Black Ash (vinyl), Walnut, Piano Black Gloss.
Serial numbers of units reviewed: 106580418290330A & B.
Price: $…
Analog Sources: Dr. Feickert Analogue Blackbird turntable with Jelco KT-850L tonearm, AMG Giro G9 turntable & 9W Turbo tonearm; AMG Teatro, EMT TSD 75, Etsuro Urushi Cobalt Blue, Hana SL, Koetsu Rosewood Signature Platinum, My Sonic Lab Ultra Eminent Ex cartridges.
Digital Sources: Mac mini computer running Audirvana Plus 3.2; JVC X-Z1010 CD player (transport only); Chord Qutest, HoloAudio Spring "Kitsuné Tuned Edition" Level 3 DACs.
Preamplification: Auditorium 23, Bob's Devices CineMag 1131, Dynavector SUP-200, EMIA MC step-up transformers;…
I used DRA Labs' MLSSA system and a calibrated DPA 4006 microphone to measure the Klipsch Reference Premiere RP-600M's frequency response in the farfield, and an Earthworks QTC-40 mike for the nearfield responses. I left the grille off for the measurements, The Klipsch's specified sensitivity is an extraordinarily high 96dB/2.83V/m. My estimate was much lower, at 89.6dB(B)/2.83V/m, though this is still higher than is typical for a small two-way speaker. Fig.1 shows that the RP-600M's impedance magnitude (solid trace) remains above 10 ohms for the entire treble,…
Sugden again showed…
But even under the best…
Description: Solid-state stereo preamplifier with remote control. Inputs: 4 single-ended (RCA), 1 balanced (XLR), 1 single-ended tape (RCA). Outputs: 2 single-ended line-level (RCA), 1 balanced line-level (XLR), 1 tape (RCA). Input impedance: 50k ohms (single-ended), 25k ohms (balanced). Output impedance: 600 ohms (single-ended, balanced). Input sensitivity: 100mV for 1V output. Maximum output (to clip): 10V. Bandwidth: 6Hz–300kHz. Frequency response at 1V output: 15Hz–30kHz, ±0.1dB. Stereo separation (weighted): >90dB. Distortion (1V output): 0.006% at 1kHz…
Analog Sources: Thorens TD 124 turntable (reconditioned by Schopper AG); Ortofon RMG-212 (rebuilt), Thomas Schick 12" tonearms; Ortofon 90th Anniversary SPU & Xpression cartridges.
Digital Sources: Intel NUC computer with SSD drive running Roon Optimized Core Kit; PS Audio PerfectWave DirectStream DAC.
Preamplification: Auditorium 23 Standard step-up transformer, EAR 834P phono stage, PS Audio BHK Signature preamplifier.
Power Amplifiers: Pass Laboratories XA60.8, PS Audio BHK Signature 300 Mono (all monoblocks).
Integrated Amplifier:…
I measured the Sugden Masterclass LA-4's performance with my Audio Precision SYS2722 system (see the January 2008 "As We See It"). The maximum gain for the balanced inputs to the balanced outputs was 20.75dB, and a little higher from the unbalanced input to the unbalanced output: 21.4dB. The preamplifier preserved absolute polarity (ie, was non-inverting) with both balanced and unbalanced inputs and outputs. (Its XLR jacks are wired with pin 2 hot, the AES convention.)
The LA-4's unbalanced input impedance was lower than specified, at 12.5k ohms at 20Hz and…