Where the interface would come in handy, however, is in problematic listening rooms. In an asymmetric setting, the balance could be tuned with the…

search
Like a lot of folks, I've adopted a "wait and see" attitude toward the emerging digital formats. On one hand, I've got a two-turntable, 10,000-LP commitment to analog. On the other hand, I've been mightily impressed by the initial 24/96 releases, and by demos of Meridian's Lossless Packing and Sony's DSD. In between, there are great-sounding CDs and players like the CAL CL-15. Until it gets sorted out, my strategy is to hunker down with my records and reasonably priced CD and DVD players.
As I was listening to the CL-15, I found myself…
Description: Single-chassis CD player with full-function remote control and digital (S/PDIF) input. D/A conversion: dual 20-bit Burr-Brown PCM1702 DACs. Digital filter: Pacific Microsonics PMD-100 HDCD decoder/filter. Outputs: one pair variable-level single-ended (RCA) analog, one pair variable-level balanced (XLR) analog (optional). Other: RS232 interface port. Frequency response: 5Hz–20kHz ±0.1dB. S/N Ratio (A-weighted): 104dB. Channel separation: 115dB. THD+Noise: 0.005%. Analog output voltage: 0–3V RMS single-ended, 2–6V RMS balanced. Analog output impedance…
Analog playback: VPI TNT turntable, JMW Memorial tonearm, Benz-Micro LO4 cartridge; Well Tempered Reference Record Player, Clearaudio Gamma Gold cartridge.
Preamplification: Sonic Frontiers Phono 1 and Acoustech phono preamps, VAC CPA1 Mk.II preamp, Sonic Frontiers Line 3 line stage.
Power amplifiers: VTL Ichiban, VAC Renaissance 70/70, Plinius SA-100 Mk.III.
Loudspeakers: Genesis 200, Magnepan MG1.6 Q/R, Thiel CS2.3.
Cables: Nirvana S-L; Kimber KCAG, KCTG, and Bi-Focal XL; Synergistic Research Resolution Reference and Designer's Reference;…
The CL-15 was measured with its options set to the default settings, the condition in which it was auditioned by Brian Damkroger. One exception was the maximum level, which was at the higher option. From the single-ended outputs, the maximum level at 1kHz was 3.08V RMS, 3.75dB higher than the CD standard. As expected, the maximum voltage from the balanced outputs was exactly twice that, at 6.16V. The output impedance was a low 37 ohms from the single-ended jacks, 114 ohms from the balanced. The output polarity was absolute phase-correct from the single-ended…
There are lots of good reasons to consider a CD changer. One that occurred immediately to me was that I work at home a lot, often spending evenings catching up on reading and paperwork. I rarely work to music because deciding what to listen to and changing discs shifts my focus from what I'm doing to the music. A changer might be a perfect solution. Other reasons popped into my head as…
The Arcam excelled in background music mode, risking failure only in that its sound flirted with being too engaging to remain in the background. Several times during the…
Description: Six-disc CD player with analog and digital outputs and full-function remote control. D/A conversion and digital filter: Crystal Semiconductor 20-bit. Output complement: two pairs of single-ended (RCA) analog outputs, one S/PDIF (RCA) digital output. Analog output impedance: 75 ohms. Other: electrical bus interface for use with Arcam multiroom systems. Frequency response: 20Hz–20kHz, –0.5dB. S/N ratio (CCIR): >105dB. THD (0dB, 1kHz): <0.005%. Output level (0dB): 2.3V. Power consumption: 20VA max.
Dimensions: 16.9" (430mm) W by 4.9" (125mm) H…
Analog playback: VPI TNT turntable, JMW Memorial tonearm, Benz-Micro LO4 phono cartridge; Well Tempered Reference Record Player, Clearaudio Gamma Gold phono cartridge.
CD players: Parasound CDP-1000, Marantz CD63SE, CAL CL-15, CAL DX-2.
Preamplification: Sonic Frontiers Phono-1 and AcousTech phono preamps, Sonic Frontiers Line-3 line stage, VAC CPA1 Mk.II preamplifier.
Power amplifiers: VTL Ichiban, VAC Renaissance 70/70.
Loudspeakers: Audio Artistry Dvorak, Magnepan 1.6 Q/R, Thiel CS2.3, Gershman Acoustics Avant Garde.
Cables: Kimber KCAG,…