Michael Fremer raved, raved about the Soundsmith SG-200 strain-gauge phono cartridge system in the March issue. "The SG-200 is a unique game-changing product," he wrote, so I made sure I checked it out at Axpona. In a system featuring Soundsmith's own HE150 MOSFETamplifiers and Dragonfly two-way standmounts ($1500/pair), the strain-gauge cartridge, mounted in a Schröder Reference tonearm on a VPI turntable, breathed new life into Dave Brubeck's "Take Five," with a clean, open sound and excellent upper-bass clarity. When Mikey write that the SG-200 was "as addicting as its proponents say," my experience at Axpona convinced me he was correct.

The system in distributor The Signal Collection's room was decidedly esoteric: Klimo Labor Merlino preamp ($6699) and Tine class-A tube monoblocks ($8999/pair) from Italy, and the Transmission Audio M1i Ribbon Mini speakers from Sweden ($4499/pair), hooked up with Klimo Labor Reference interconnect ($2999/1.2m pair) and Stereolab Diablo speaker cable from the USA ($1395/2.5m pair). Source was a more mundane Oppo BDP-95 universal player ($999). The speakers caught my attention, as they are designed by the engineer responsible for the similar-looking Red Rose Music R3 that Michael Fremer reviewed for Stereophile a decade ago. However, the treble above 3kHz is now handled by four ribbon units. The sound in this room benefited from. . .

The room shared by Audio Physic and Esoteric was one I returned to, as I couldn't quite believe the superb treble quality being produced by the 25th Anniversary edition of Audio Physic's Virgo speaker (to the right of the photo, $12,800/pair). Couldn't believe it? It was because this speaker was using a cone tweeter. But as AP's Reinhard Goerner explained, with the break-up problems of soft-dome tweeters now well-understood, it made engineering sense to use a cone. The Virgo's aluminum-cone midrange unit features a cast basket with minimal surface area to interfere with the diaphragm's backwave and the twin woofers are mounted on the enclosure sides to minimize vibrational excitation. Esoteric was featuring. . .

"Designed by Ear. Verified by Science." So says the promotional material from Nashville-based LSA, who were demming the pretty LSA1 Statement speaker ($2600/pair) at Axpona, driven by their 150Wpc Statement hybrid integrated amplifier ($5000). This amplifier uses a pair of Electroharmonix 6922 tubes in its preamp section but a solid-state output stage. The speaker combines a treated paper-cone woofer with an Aurum Cantus folded-ribbon tweeter and uses Alphacore air-cored inductors in its crossover. Listening to a laidback blues from George Faber, "It Beats Working," I was impressed by the smoothness of the highs and the low-frequency extension of this nicely finished two-way.

The jewels of an audio Show are the rooms that wrest great sound quality from inexpensive ingredients. Such was the case in the second-floor room of the Sheraton shared by Wharfedale and Musical Fidelity. The Wharfedale Diamond 10.7 towers ($1299/pair)were being driven a Musical Fidelity M3i integrated amplifier ($1500) and M3CD player ($1500) that Sam Tellig raved about in his November 2010 column. If you don't count the kilobucks' worth of Transparent cabling that was being used, this system weighed in at a very affordable $4300. Elvis Presley's "Fever" sounded clean and open with excellent extension at both ends of the spectrum.

I have made a point of visiting rooms at Shows featuring speakers from the Adam, the German manufacturer successfully extending their expertise with professional monitor loudspeakers into the world of consumer audio. In the room at Axpona, strategically treated with RealTraps, Adam were showing off their Tensor Beta towers ($31,000/pair) with Accuphase amplification and CD player via Transparent cable. The speaker's two Hexacone woofers are mounted on the front and back of the lower enclosure and driven by an internal amplifier. The midrange and treble enclosure is decoupled from the woofer cabinet with three sand-filled leather bags and both double-walled enclosures have the space between the walls filled with sand. The glory of this speaker is. . .

This story originally appeared at InnerFidelity.com

Whenever I can, I spend time on the back of this beast: a 2005 Yamaha FJR 1300 super sport touring bike. This baby eats continents. I once left Bozeman, Montana in the morning and slept in a cornfield in Iowa that night. I really dig long-distance travel --- the gradual and ever-changing scenery, weather, and geology punctuated with little towns and churches is mesmerizing. Nonetheless, I need my tunes to complete the experience, and it took me a good long while to find just the right headphones to accompany me on my journeys.

I enjoyed speaking with Role Audio’s Erol Ricketts, who is proud of his company’s formaldehyde-free designs. After researching the harmful effects of heavy exposure to toxic substances such as formaldehyde, Ricketts decided it would be best for his own health, and for the health of his company, family, and planet, to manufacture a new sort of loudspeaker, one with a small, and environmentally friendly, footprint.

Because Role Audio believes hi-fi should aid in the discovery of new music&#151a philosophy I hold dearly&#151all of the company’s products are named after ships, vessels for discovery. The slim Sampan ($1400/pair) measures just 4” W by 4” D by 37” H, and uses a single 3.5” driver in a transmission line design. Mated to a Peachtree Audio iDecco, the system impressed me with its transparency and solid stereo imaging; these speakers “disappeared” like no others I heard at the show.

The larger speakers in the Role Audio room were the Model 100M from NSMT's Mastering Series ($5500/pair). An active two-way speaker, the 100M uses a coaxial drive-unit from SEAS in a well-finished enclosure made in the USA from formaldehyde-free materials. The sound, using a Squeezbox Touch and a Peachtree iDecco used as a DAC was rich, with good dynamics.

Upon walking into the Napa Acoustic room, I heard many expressions of awe and disbelief as attendees searched for subwoofers and asked, again and again, if the products’ stated prices were correct. Indeed, the system here&#151Napa NA208 A amplifier ($399), NA208S speakers ($199), and DT-307C CD player ($399)&#151filled the room with solid, believable sound and music.

The brand made its debut at last year’s Jacksonville Axpona. While all of Napa’s current manufacturing takes place in China, the company’s Joseph Kwong told me he hopes to produce an affordable vacuum tube amp right at home, in Fremont, CA, in the not too distant future.