LATEST ADDITIONS

The $25,000, 500W Mark Levinson No.53 digital-switching reference monoblock amplifier made its regular non-playing appearance at CES 2012 but this time with an illuminated cutaway display, allowing its lead design engineer, Mark Seiber, to walk me through its circuitry. The transparent panel, which the display used in place of heatsinks allowed me to easily see the No.53's four major subsections (analog input stage, modulation, amplifier output stage with its eight air-core inductors, and power supply section, which is at the bottom of the chassis.

In response to Mark Levinson Audio Systems' 40th Anniversary, the company has announced a new line of products for the two-channel audiophile, the 40th Anniversary Collection at CES 2012, which includes the $25,000 No.52 Reference dual-mono preamplifier, the $10,000 No.585 integrated amplifier, the $6000 No.519 SACD player and the $6000 No.560 digital processor. I was most intrigued by the $10,000 No.585 integrated amplifier shown in the photo, which is rated at 225Wpc into 8 ohms, and provides a dedicated subwoofer output.

Soulution Audio's Cyrill Hammer was on hand to discuss the company's "small" Soulution 501 mono Amplifier ($55,000/pair). Similar in design to the Soulution 710 stereo amplifier that had so impressed Michael Fremer in the August 2012 issue of Stereophile, the more diminutive 501 monoblock amplifier is rated at 125W into 8 ohms, utilizes six switching-mode power supplies, and features a high-bandwidth, zero-feedback voltage-amplification input stage. Unlike the 176 lb Soulution 710 stereo amplifier that required three good men to move into Mikey's listening room, the 501 weighs in at a "mere" 80 lbs per chassis.

Harman Specialty Audio's Kevin Voecks demonstrated his latest portable room-response testing system, an iPad 2 running Studio Six Digital's "Audio Tools" iTunes app. (A favorite of JA’s.) The iPad 2 plus a $50 external mike and an accessory box from Studio Six becomes a portable audio test system with up to 1/48-octave resolution. Kevin used this tool to set up Revel's new M106 and F208 loudspeakers on the 35th Floor of the Venetian Hotel. He demonstrated frequency response graphs and a virtual SPL meter—seen in detail as a graphic representation of a huge analog SPL meter on the iPad screen.

Luke Manley and Bea Lam of VTL were on hand as host and hostess at the VTL exhibit suite at the Venetian Hotel to present their two new stereo tube amplifiers, the $33,500, 400Wpc S400 Series II amplifier, and the $10,000, 200Wpc S200 Stereo Signature amplifier shown in the photo. Although the S400 was configured into a floorstanding tower and the S200 in the rack-mounted chassis used for their MB-450 monoblock amplifier, both new products feature VTL's latest tube technology, including fully balanced, differential input stage, VTL's SmartTube technology with automatic bias and screen supply adjustments and fault sensing, and a new user-adjustable damping factor feedback control. The feedback loop amount can be precisely set to suite the listener's taste via three-position switches located between the input tubes on the top of the chassis.

A close-up of the Joshua Joseph-designed tie. A 2012 CES highlight!

I know of speakers where, depending on the crossover, the same 5" or 6" driver is used as midrange or as woofer, but I've never encountered a speaker where a driver normally designated as a tweeter also functions as a midrange. This is the unusual design approach taken by McIntosh in some new speaker models, including the $10,000/pair XR100, and, judging by the sound, it certainly works for them. The driver is a 2" metal dome: eight of these are combined to serve as midrange, with two more as the tweeter flanking a supertweeter.