LATEST ADDITIONS

Audio retailer Wes Bender Studio had a room set up in the Venetian to feature their selected product lines, and the Viola Crescendo caught my eye. It's both a preamp and DAC with both analog and digital inputs on the back. Digital includes 24/192 USB and SPDIF and the Crescendo should be available in the US in a Marchish kind of time frame. Retail is $19k and that includes an iPod touch.

Ron Sutherland had a rack of his components at CES to drive Vandersteen Quatro floorstanding loudspeakers. The rack consisted of the two monophonic Phono Block phono preamplifiers, recently reviewed by Brian Damkroger in Stereophile; the $15,000 Destination Line Stage (one non-audio signal carrying control unit with Nixie tubes, and one audio chassis for each channel); and the $10,000/pair, 200W monoblock power amplifiers. Except for the amplifier and control chassis, most of these units are configured into two side-by-side subunits—one for power supply and one for audio signal—attached only by front and rear panels.

Ron Sutherland of Sutherland Engineering taught me all I need to know about Nixie tubes at CES. Used as the main visual display device used in his Reference N-1 preamplifier and in his Destination Line-Stage preamplifier's control unit shown in the photo, the Nixie tube was invented in 1955 as the first electronic display tool for reading out the numbers 0–9. The Nixie's designers fashioned a wire mesh into 9 layers, each layer in the shape of a number, resulting in a tidy small stack. This tiny wire stack was inserted into a small glass envelope, filled with neon gas, and then sealed. When any of the separate metal layers was charged with 175 volts, the neon gas around the wire ionized, and lit up. When plugged into a circuit board, the tube would read out the numbers, with each number appearing at a different depth. Paul was fascinated with the retro look of this type of readout, so he has installed it in his $15,000, three-chassis Destination line stage, and into his new $10,000 reference N-1 preamplifier.

The $25,000, 500W Mark Levinson No.53 digital-switching reference monoblock amplifier made its regular non-playing appearance at CES 2012 but this time with an illuminated cutaway display, allowing its lead design engineer, Mark Seiber, to walk me through its circuitry. The transparent panel, which the display used in place of heatsinks allowed me to easily see the No.53's four major subsections (analog input stage, modulation, amplifier output stage with its eight air-core inductors, and power supply section, which is at the bottom of the chassis.

In response to Mark Levinson Audio Systems' 40th Anniversary, the company has announced a new line of products for the two-channel audiophile, the 40th Anniversary Collection at CES 2012, which includes the $25,000 No.52 Reference dual-mono preamplifier, the $10,000 No.585 integrated amplifier, the $6000 No.519 SACD player and the $6000 No.560 digital processor. I was most intrigued by the $10,000 No.585 integrated amplifier shown in the photo, which is rated at 225Wpc into 8 ohms, and provides a dedicated subwoofer output.

Harman Specialty Audio introduced the new Revel Performa 3 series of loudspeakers at the 2012 CES. Kevin Voecks, lead audio engineer in the design, was delighted at the increased performance of Performa 3 series, including the $4500/pair, three-way, F208 full-range floorstander and the $1750/pair M106 two-way bookshelf. The F208 replaces the more expensive, $7500 F32 Performa in the previous series.

Harman Specialty Audio's Kevin Voecks demonstrated his latest portable room-response testing system, an iPad 2 running Studio Six Digital's "Audio Tools" iTunes app. (A favorite of JA’s.) The iPad 2 plus a $50 external mike and an accessory box from Studio Six becomes a portable audio test system with up to 1/48-octave resolution. Kevin used this tool to set up Revel's new M106 and F208 loudspeakers on the 35th Floor of the Venetian Hotel. He demonstrated frequency response graphs and a virtual SPL meter—seen in detail as a graphic representation of a huge analog SPL meter on the iPad screen.