This product is a pre-trol. What, you may well ask, is a "pre-trol?" Well, Threshold Corp. calls its FET-10 a preamplifier, but it isn't, really. In fact, it isn't an It at all; it's a Them. Only half of Them is a preamp, and you can buy each half separately. If that sounds a little confusing, maybe it's because some of the old, familiar language of audio is starting to lose its relevance.
Klyne Audio Arts has an almost Zen-like approach to the design of its products. Like the best Japanese designs, Klyne's preamps are aesthetically pleasing in appearance, do exactly what they're supposed to, and their controls are not only where you would expect them to be, but have an almost sensually smooth action. Internal construction, too, is a work of art—the kind of design which, transferred to a tapestry, would grace the wall of any listening room. You have to see the insides of a Klyne preamp to appreciate how attractive-looking an audio component can be. But physical beauty is only one aspect of Stan Klyne's designs; of all the electronics manufacturers I know of, Klyne Audio Arts also makes products more adjustable than any others, so as to appeal to the needs of what I call compulsive tweaks.
As I write this, I am recuperating from four days of frenzy at the 1986 Winter CES in Las Vegas, Nevada. I am also pondering why I was so unexcited by most of what I saw and heard of the high-end exhibits; high-end audio may have reached a developmental plateau of sorts.
The <A HREF="http://www.stereophile.com/phonocartridges/ortofon_mc-2000_mc_phono_car… MC-2000</A> may just have been the most impractical cartridge to be unleashed upon the audio community for some years. With a high compliance (20cu) that made it ill-suited for most tonearms, it also had a preposterously low signal output of 50 microvolts, which gave new meaning to the terms hum and noise. Few MC preamps had enough gain to deliver adequate driving voltage to a system, and none of those that did had low enough noise to be usable with the 2000. If the problem wasn't hum, it was hiss; if hiss was acceptably low, there would be too much hum. At least Ortofon had the sense to be aware of the problem and to do something about it, in the form of their T-2000 step-up transformer, which is the only device I ever found that would allow the cartridge to be operated without a constant background of hum or hiss. Despite all this, I have used the MC-2000 as my reference cartridge for the last two years. Why? Because of all the cartridges I've tried, it is by far the most accurate.
There are certain manufacturers for whom every new product implies the promise of countless modifications, Usually a month or so apart, culminating inevitably in a version so far removed from the original that it must be assigned a new model designation—usually a letter suffix ranging from A, to D. By the time E is envisioned, another CE Show is approaching, so the decision is made to give the unit an exterior facelift and a brand-new model number. Presto! A new product for CES.
Bill Firebaugh's first product, the outrageous-looking <A HREF="http://www.stereophile.com/tonearms/485well">Well-Tempered (tone) Arm</A>, established him as one of audio's most innovative designers. At the 1985 Winter CES, he showed a prototype companion product—the Well-Tempered Turntable—and was producing production units by January 1987. He discusses here the WTT's unusual design features. (Readers should note that, since we have not yet tested the new turntable, this interview is not to be interpreted as an endorsement of the product.)
Remember Rube Goldberg? He was a cartoonist during the late 1920s to early 1950s who specialized in devising the most outlandish and ingenious devices ever conceived by man, before or since. A Rube Goldberg mousetrap, for example, would occupy an entire small room. In taking the bait, the mouse would tip a balance beam, dropping a steel ball into a gutter, down which the ball would roll to strike a paddle whose spin would wind up a string that hoisted a weight into the air until it reached a trigger at the top, which would then release the weight to drop onto the unsuspecting mouse. Splat!
I'll say one thing right off about the Infinity RS-1B: It sure <I>looks</I> as if you're getting your money's worth.