Description: Class-D stereo power amplifier. Inputs: 1 pair unbalanced (RCA), 1 pair balanced (XLR). Speaker connections: 2 pairs 4mm banana-plug binding posts. Modes: Stereo/Mono/BTL. Maximum output: 100Wpc into 4 ohms, stereo mode( 17dBW). Frequency response (6 ohms, 1W): 10Hz–30kHz, ±1dB. Total harmonic distortion: 0.02% at 1kHz, 80% output. Input sensitivity, gain: 300mV RMS, 37.3dB at max volume into 6 ohms, 1kHz, unbalanced input. Electrical consumption: 9Wpc (idle), 150Wpc (maximum output).
Dimensions: 13.7" (350mm) W by 3.7" (95mm) H by 14.6" (375mm…
search
Analog Sources: Stabi S turntable & Stogi tonearm; Denon DL-103, Ortofon 2M Red cartridges.
Digital Sources: Apple MacBook computer, Halide DAC HD, Western Digital T2 Mirror Drive (2).
Preamplification: Auditorium 23 A23 moving-coil step-up transformer, Shindo Laboratory Allegro preamplifier.
Power Amplifier: Shindo Laboratory Haut-Brion.
Loudspeakers: DeVore Fidelity Orangutan O/93, Snell Type J/II.
Cables: Interconnect: Analysis Plus, Shindo Laboratory. Speaker: Auditorium 23.
Accessories: Music Hall Aztec Blue & Mooo…
When I unpacked the Spec amplifier for testing, I was at first confused: Although Ken Micallef was supposed to have reviewed Spec's RPA-W7EX, a label on the amplifier's rear panel identified it as an "RPA-W5ST." It turned out that this very early export sample of the 'W7EX had been assembled before the correct labels were ready. Jonathan Halpern, of US distributor Tone Imports, assured me that the review sample was representative of current production.
Reassured, I performed a full set of measurements on the RPA-W7EX using my Audio Precision SYS2722 system…
You heard right. The Port Townsend Record Show is taking place Saturday, March 5, 11:00am–5:00pm (vendor set-up 8:00 am) in the ever-jumpin' American Legion Hall at 209 Monroe Street facing Port Townsend Bay. The show promises, as of press time, at least 28 vendor booths filled with vinyl and…
This was the place, the mood, the reverie with which I began my examination of Simaudio's Moon Neo 340i…
Description: Two-channel, solid-state, class-D power amplifier. Inputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Outputs: 2 pairs multiway binding posts. Frequency response: 3Hz–30kHz, –3dB. Continuous output power at rated THD, 20Hz–20kHz, both channels driven: >250W (>24dBW, no load specified). IHF dynamic power: 355W into 8 ohms, 640W into 4 ohms, 620W into 2 ohms. Clipping power at 1kHz, 0.1% THD: >300W into 8 ohms (24.77dBW). Peak output current, 1 ohm, 1ms: >50 amps. Input sensitivity: 1.6V. Input impedance: 17k ohms + 200pF (RCA),…
Phono Stage: Moving-coil
I change phono cartridges often. Therefore, I'm always happy when an integrated amplifier includes choices of gain (40 or 60dB) and loading (100 ohms or 47k ohms plus 0pF or 100pF), as does the Moon Neo 340i D3PX. Simaudio uses active circuitry—as opposed to transformers—for the extra gain.
Unlike most phono stages, in…
Manhattan System
Digital Sources: Oppo BDP-105 universal BD player; Baetis XR2 PC-based music server; exaSound e28, Merging Technologies NADAC+ multichannel D/A processors; QNAP TS569L NAS.
Preamplifier: Audio Research MP1.
Power Amplifiers: Benchmark Media Systems AHB2, McIntosh Laboratory MC303, Parasound Halo A 31.
Loudspeakers: Bowers & Wilkins 800 Diamond.
Cables: Digital: AudioQuest Vodka (HDMI) & Carbon (USB), van den Hul Flat 180 (HDMI). Interconnect: AudioQuest Earth balanced, Kubala-Sosna Anticipation (RCA/XLR).…