There was always a number of manufacturers who regularly displayed their wares at the Stereophile show and always achieved good sound, no matter what they…
There was always a number of manufacturers who regularly displayed their wares at the Stereophile show and always achieved good sound, no matter what they…
The Excite X12's reproduction of the lower…
Description: Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1" (26mm) silk-dome tweeter, 5.7" (145mm) magnesium-silicate polymer-cone woofer. Crossover frequency: 2kHz. Frequency response: 50Hz–23kHz, ±3dB. Nominal impedance: 4 ohms. Sensitivity: 86dB/2.83V/m. Power handling: 150W.
Dimensions: 11.2" (285mm) H by 6.7" (170mm) W by 10" (255mm) D. Weight: 14.3 lbs (6.5kg).
Finishes: Maple, Cherry, Rosewood, Black Ash real-wood veneers; add $75/pair for high-gloss white or black.
Serial Numbers Of Units Reviewed: 03632378/9.
Price: $1200…
Analog Sources: VPI TNT IV, Rega Planar 3 turntables; Immedia RPM, Syrinx PU-3 tonearms; Koetsu Urushi, Clearaudio Virtuoso Wood cartridges.
Digital Sources: Lector CDP-7T, Creek Destiny CD players.
Preamplification: Vendetta Research SCP-2D phono stage, AudioValve Eclipse line stage.
Power Amplifier: Audio Research Reference 110.
Integrated Amplifier: Creek Destiny.
Loudspeakers: Amphion Helium2, Epos M16i, Monitor Audio RS6 Silver.
Cables: Interconnect (all MIT): Magnum M3, MI-350 CVTwin Terminator, MI-330SG Terminator. Speaker: Acarian…
I performed the quasi-anechoic measurements of the Dynaudio Excite X12 with DRA Labs' MLSSA system and a calibrated DPA 4006 microphone. The speaker's rather clumsy grille was left off for the measurements. The Excite X12's specified voltage sensitivity is 86dB/2.83V/m; my estimate of its sensitivity was a bit lower than that, at 84.8dB(B)/2.83V/m, which is below average. This speaker will work better with relatively high-powered amplifiers, such as the Creek integrated and Audio Research power amp BJR used for his auditioning. However, while Dynaudio specifies the…
Description: Tubed, stereo integrated amplifier with 3 single-ended inputs, certified iPod dock, S-video output from iPod, subwoofer output, return loop, tape out, ¼" headphone jack, IR/RF remote control. Tube complement (hand-matched): eight EL84, two 6416, two 12AT7. Maximum output power (1.5% THD at 1kHz): 32Wpc into 5 ohms (UL mode), 18Wpc into 5 ohms (Triode mode). Frequency response: 15Hz–58kHz, –1dB. Maximum gain: 35dB. Volume-control range: 102dB (1dB/step when turned slowly). Input sensitivity (UL full power): 210mV in = 32W out into 5 ohms at maximum…
Digital Sources: Theta Miles CD player via S/PDIF output, Benchmark DAC1 D/A converter/preamplifier, Sony Vaio laptop running Sony Soundforge 9, M Audio Fast Track Ultra USB interface.
Power Amplifiers: Rogue Audio M180 monoblocks, Pass Labs Aleph 3 & XA 30.5.
Loudspeakers: Revel Performa F30 & Ultima Gem, Totem Acoustic Forest, Klipsch Palladium P-17B.
Cables: Digital: Stereovox HDXV coaxial. Interconnect: Sain Line Systems pure balanced. Speaker: Kimber BiFocal XL. AC: Sain Line Systems Reference.—Erick Lichte