anti skating question from a newb
- Read more about anti skating question from a newb
- Log in or register to post comments
Quote:
REAL MUSICANS don't play weddings!!! Then I don't know any accordian players or tumpet players. www.mattoree.com![]()
DUP, it can also be said that real musicians don't play the Lion's Den.
Now, this special oil is for tight tolerances, provides lubrication...hmmmm, the stuff that is $6 or $1.25/QT is designed for what? Hmmm hot engines, severe stress, all kinds of conditions, $65 for 25CC, what won't an audiophile not beleive? Bentleys, Audi, VW, BMW, Bugatti ain't got oils this pricey!!!! We need an audio review, compare the $100K TT at MF's house using this oil and the cheap stuff that goes into pricey cars.
Hello stereophiles,
Here is my situation, and hopefully you guys can help me.
I just bought a condo (1st floor and basement) that had just been renovated by a... lets call him Silly Party Person (SPP). What SPP did, is that he set up 4 speaker wires in the condo that all lead to a corner of the living room. The location of those are: Two in the kitchen/living room/dining room area (it's an open concept condo), one in the bathroom, and one in my son's room.
Okay, so NIN had their moment in the 90s. I'm not so fond of their music now, but what can I say when the band offers its complete new album THE SLIP, completely for free! (Trent Reznor's message on the site was something like, thanks for the support guys, this one's on me.) Best of all? You can choose to download in FLAC, Lossless, or 24/96!!!
Hi all
First of all, thanks for creating this section for newbies 
I'm looking for a recommendation for a new budget integrated amplifier to pair with my Paradigm Mini Monitor speakers (I will be upgrading my (low end) sources -- lp, cd, tape, ipod -- incrementally)
Parameters:
- Roughly $500 or so
- Must have a phono section (NAD, Cambridge Audio won't do)
- Does not need to be high power; 30W@8Ohms is probably adequate for me
Hi all im new to the forum and somewhat new to vinyl. I purchased a Thorens 166 MK II without the anti skating device. My question is can i rig one up, or do i need to track the real deal down? The only problem it is causing so far is that when i drop the needle it seems to "take off" in other words it jumps to the flat edge of the record. Thanks in advance for any advice