LATEST ADDITIONS

Harman Specialty Audio introduced the new Revel Performa 3 series of loudspeakers at the 2012 CES. Kevin Voecks, lead audio engineer in the design, was delighted at the increased performance of Performa 3 series, including the $4500/pair, three-way, F208 full-range floorstander and the $1750/pair M106 two-way bookshelf. The F208 replaces the more expensive, $7500 F32 Performa in the previous series.

Harman Specialty Audio's Kevin Voecks demonstrated his latest portable room-response testing system, an iPad 2 running Studio Six Digital's "Audio Tools" iTunes app. (A favorite of JA’s.) The iPad 2 plus a $50 external mike and an accessory box from Studio Six becomes a portable audio test system with up to 1/48-octave resolution. Kevin used this tool to set up Revel's new M106 and F208 loudspeakers on the 35th Floor of the Venetian Hotel. He demonstrated frequency response graphs and a virtual SPL meter—seen in detail as a graphic representation of a huge analog SPL meter on the iPad screen.

Luke Manley and Bea Lam of VTL were on hand as host and hostess at the VTL exhibit suite at the Venetian Hotel to present their two new stereo tube amplifiers, the $33,500, 400Wpc S400 Series II amplifier, and the $10,000, 200Wpc S200 Stereo Signature amplifier shown in the photo. Although the S400 was configured into a floorstanding tower and the S200 in the rack-mounted chassis used for their MB-450 monoblock amplifier, both new products feature VTL's latest tube technology, including fully balanced, differential input stage, VTL's SmartTube technology with automatic bias and screen supply adjustments and fault sensing, and a new user-adjustable damping factor feedback control. The feedback loop amount can be precisely set to suite the listener's taste via three-position switches located between the input tubes on the top of the chassis.

A close-up of the Joshua Joseph-designed tie. A 2012 CES highlight!

I know of speakers where, depending on the crossover, the same 5" or 6" driver is used as midrange or as woofer, but I've never encountered a speaker where a driver normally designated as a tweeter also functions as a midrange. This is the unusual design approach taken by McIntosh in some new speaker models, including the $10,000/pair XR100, and, judging by the sound, it certainly works for them. The driver is a 2" metal dome: eight of these are combined to serve as midrange, with two more as the tweeter flanking a supertweeter.

The business card of Eventus Audio's designer, Domenico Fiorentino, says "Fine Italian Products." But even if it didn't say that, even a casual look at the curved lines and impeccable finish of the Eventus speakers will immediately make you think that the speakers must be made in Italy. Their latest iO line is designed to bring the quality of their cost-no-object offerings to a more affordable level. North American prices are yet to be determined, but the stand-mounted two-way iO is 2500Euros/pair and the iO.f three-way floorstander is 5500Euros/pair. Fiorentino is pictured here with Angie Lisi of Audio Pathways, the North American distributor of Eventus.

Brent Hefley, Marketing Manager of Ayre, walked me through the circuit layout of Ayre's newest amplifier, the $14,950, dual-mono, 200Wpc (8 ohms) VX-R. Based on the well-regarded and long-established MX-R monoblock and introduced at the 2011 CES, the VX-R uses Ayre's ultra-fast printed circuit board materials. Ayre is expecting great things, Brent told JA, from its recent hiring of ex-Classé and Linn engineer Alan Clark, who joins Charlie Hansen and Ariel Brown as the Colorado company's creative engine.