The South Korean electronics manufacturer Allnic Audio seems determined to shock us out of our complacency with their first digital product, the D-5000 DHT—a 32-bit/384kHz DSD digital-to-analog processor that costs $11,900. Not…
search
There may have been a time when vacuum tubes and microprocessors seemed strange bedfellows. But nowadays—given the countless digital processors with tubed output stages, and an even greater number of tubed amps and preamps whose insides are crawling with the latest solid-state devices—we're more or less used to the idea. Here as elsewhere, hybrids are no big deal.
The D-5000 also distinguished itself with the title track of PJ Harvey's Let England Shake (AIFF ripped from CD, Vagrant VR651). Compared with the Halide, the Allnic's frequency range stretched further in the direction of both extremes—although the increase in treble information was a mixed blessing with this selection, exposing the recording's top-end graininess—and the D-5000 presented the music with far greater force, especially in the lowest octaves. (The bass drum sounded much more menacing through the Allnic than the Halide.) Greater force—and dramatic nuance of every degree—was also…
Sidebar 1: Specifications
Description: Single-box digital-to-analog converter. Tube complement: four 3A5, one 5654, one 7233. Formats supported: all PCM and DSD codecs (AIFF, WAV, DSF, etc.). Incoming sample rates accepted (USB, AES/EBU, coax): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz; DSD 64 & 128. Digital inputs: 1 optical (TosLink), 1 USB, 1 AES/EBU (XLR), 2 coaxial (RCA). Analog outputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Output: 2.5V RMS. Output impedance: 150 ohms. Frequency range: 20Hz–20kHz. THD: <0.1%.
Dimensions: 16.75" (430mm) W by 5.85" (150mm)…
A decade or two ago, I stumbled on a surprising demo room at an audio show. I don't recall most of the equipment, but I do remember a pair of Paradigm Studio 20 speakers at one end, their crossover entrails dangling free, connected to the rest of the system by a multiplicity of wires. At the other end, among the usual electronics, was a PC whose screen was a crazy quilt of graphs and menus that constantly twinkled in response to the ministrations of DEQX's Kim Ryrie. He seemed totally absorbed, but looked up and proudly offered to show me what he was doing. When I told him that I was…
Sidebar 2: Associated Equipment
Analog Sources: Garrard 301, Thorens TD 124 turntables; EMT 997, Thomas Schick tonearms; Ortofon SPU-A & SPU 95th Anniversary, Miyajima Premium BE Mono II, EMT OFD 15 & OFD 25 & TSD 15 70th Anniversary pickup heads.
Digital Sources: Halide Designs DAC HD USB DAC; Apple iMac G5 computer running Audirvana Plus 1.5.12 playback software; Sony SCD-777ES SACD/CD player.
Preamplification: Hommage T2 step-up transformer; Shindo Masseto & Allegro preamplifiers.
Power Amplifiers: Shindo Corton-Charlemagne monoblocks & Shindo Cortese,…
Here, DEQX adds a wrinkle that I love. I'd already measured the speakers and created the correction filters, but how did I know if it all did what was intended? Sure, I can trust my ears; below, I tell you what they told me. I could also pull out another toolbox and hope that the configuration and mike setup matched. However, DEQX provides a Verification Wizard that actually repeats the measurement procedure with the correction filters in place. If you've left the speakers and mike in the same positions, the resulting graph is very impressive.
Room Correction
The next step is to…
Sidebar 1: Specifications
Description: Stereo control preamplifier with DSP-based speaker/room correction and 24-bit A/D & 32-bit D/A conversion. Inputs: 2 analog at +17dBu (XLR, RCA), 5 digital (TosLink, S/PDIF RCA, S/PDIF BNC, AES/EBU XLR, USB), 1 XLR microphone with 48V phantom power. Outputs: 4 analog (L/R Main XLR & RCA, L/R Woofer XLR & RCA), 1 full-range digital (BNC), RS-232 port and USB port for computer control. DSP: Dual Analog Devices SHARC 32-bit floating point. System latency: typically 15ms with speaker correction. Crossover slopes: 6–300dB/octave. Analog input…
Sidebar 2: Associated Equipment
Digital Sources: Sony XA-5400ES SACD/CD player; Oppo BDP-105 universal BD player; Baetis XR2 PC-based music server; exaSound e28, Mytek Stereo 192-DSD D/A converters.
Preamplification: Audio Research MP1 multi-channel preamplifier, Meridian HD621 HDMI audio processor & 861 Reference v8 digital surround controller.
Power Amplifiers: McIntosh Labs MC303, Parasound Halo A 31.
Loudspeakers: Bowers & Wilkins 800 Diamond, Bryston Middle T; JL Audio Fathom f113 subwoofer.
Cables: Digital: Black Cat Veloce, van den Hul Flat 180 HDMI,…
Sidebar 3: Measurements
I let the Allnic D-5000 DHT warm up for an hour before passing any signal, to give the tubes' operating conditions a chance to stabilize. (When the unit is first turned on, the needle on the front-panel meter slowly rises until it rests just to the right of the indicator on the scale.) I examined the processor's electrical performance with my Audio Precision SYS2722 system (see www.ap.com and the January 2008 "As We See It"), mainly using the TosLink optical input, though I repeated some of the tests using a USB connection from my MacBook Pro Laptop running on…
Sidebar 3: Measurements
Before examining the DEQX PreMate's equalization and correction features, I wanted to make sure that its basic performance as a D/A processor was up to the expected standard—"First, do no harm" is as fundamentally important in digital signal processing as it is in healthcare. I examined the PreMate's electrical performance with my Audio Precision SYS2722 system (see www.ap.com and the January 2008 "As We See It"), mainly using the TosLink optical input, though I repeated some of the tests using a USB connection from my MacBook Pro laptop running on battery power.…