Designed for smaller, modest systems, the Elgar Powerline conditioner is hand-built in Anaheim, CA. “It does three things really,” Babineau said. “A high quality circuit breaker, it also…
search
Debuting at CES 2011, Running Springs Audio’s Elgar Powerline conditioner is so new that Dan Babineau has yet to produce product literature. A trickle-down, opening price-point piece ($999/6 outlets), it can handle 1800W maximum. The 100% passive, non–current-limiting design employs the same filters as all other Running Springs Audio products, but uses a smaller-laminate inductor to increase dynamics.
To celebrate the 25th anniversary of Purist Audio Design, founder/designer Jim Aud has just introduced their 25th Anniversary cable. Shown at T.H.E. Show for the first time, the 25th anniversary line consists of interconnects ($8100/1m pair) and speaker cable ($18,000/1.5m pair).
“Basically we’re using solid silver, single crystal wiring surrounded by Ferox 103, which is a proprietary doped silicon,” Aud explained. “Our other cables only use copper or copper alloys, and don’t use the Ferox 103.” While Purist still makes two cables that contain fluid, the 25th Anniversary cabling does not…
Gary Koh of speaker manufacturer Genesis was happy to show off the new Absolute Fidelity Interface cables. Being sure to note that the product does not use the Genesis name, because it has been designed to be used with all loudspeaker brands, it has been give its own dedicated Absolute Fidelity website.
“To me, a cable should not function as a component; it should be an interface between two components,” said Koh. “Since every component is different, and draws power differently, I’ve designed different cables to interface between different components.”
The Absolute Fidelity…
Glenn Phoenix, President of Westlake Audio, was touting the loudspeaker company’s cable muffs. Made of foam, the muffs are used to support and separate cables. They are also said to benefit cables that are under-damped.
“We have a rule in the company to keep cables between 2” and 4” apart,” he said. “Putting left and right channels too close together can increase crosstalk, while positioning them too far apart may lead them to generate and pick up interference.” I hope I got that right.
Westlake Audio manufactures cable muffs with a number of different size holes and slots to…
Looking at the ginormous horn speakers in the Silbatone room, all I could think was "how did they get them through the door?" The speakers were a hybrid, the lower half being vintage Western Electric with field-coil–energized 18" woofers, and the midrange and highs being modern recreations from GIP in Japan.
I hadn't been aware of the Silbatone brand before this CES. Their website says that "The goal of Silbatone Acoustics is to recreate the musical enjoyment of the great theater systems in the home, creating practical realizations for today's serious music listeners." Okay. It turns out…
Utah-based Zu Audio does indeed goes its own way, with retro, almost-full-range pulp-cone drive-units used in high-sensitivity designs. (See Art Dudley's review of the $4000/pair Essence in the October 2009 Stereophile. All of Zu's speakers have been moderately priced, so I was not expecting to see and hear a design costing $40,000/pair when I went into the Zu room at T.H.E. Show.
The Dominance uses three 10" paper-cone drivers, each with a whizzer cone, to cover the range from 27Hz to 12kHz. Each is in its own sub-enclosure featuring Zu's proprietary ZuRG loading (See AD's review) with…
The Paragon VL-2 Signature ($8600/pair) from Hong Kong-based Volent Corp. combines a unique dual-ribbon tweeter with a titanium/graphite-sandwich–coned woofer in an attractively curved enclosure filled with wool. Frequency range is specified as 30Hz–60kHz, impedance as 4 ohms, and sensitivity as 88dB/2.83V/m. Driven by MSB's M202 tower amplifiers and MSB digital source, the sound was much larger than I was expecting from these stand-mounts.
Pride of place in the Avatar Acoustics room at the Venetian went to the four-way Siena speakers ($24,995/pair) from Italian manufacturer Rosso Fiorentino. The designer teaches electroacoustics in Florence, but is a graduate from the University of Salford in the UK. A pair of aluminum-cone 8" woofers in a separate sealed enclosure are combined with a 6.5" paper-cone midrange unit (a ScanSpeak Revelator), a 1" silk-dome tweeter, and what appeared to be a Murata "ultrasonic generator," to give a specified response of 35Hz–100kHz, –3dB.
The Siennas were demmed in a system comprising Dr.…
Austrian Vienna Acoustics set up its own distribution company in the US in 2010 and when I popped my head in the door of their suite at the Venetian, I saw they were demming the Kiss speaker ($16,000/pair) reviewed a year back by Wes Phillips. (The rest of the system comprised Ayre KX-R preamp, MX-R monoblocks, and DX-5 "universal audio engine, with Transparent cabling.)
The Kiss looks like a stand-mount but it is really a floorstander with an integral stand. The sound in this room really flattered piano, whether it was a 24/96 file of a jazz trio featuring a Fazioli instrument, or Glenn…
The Estelon speakers from Alfred & Partners ($43,900/pair) were one of the hits of last year's RMAF, so I made a point of taking a listen to them at CES. The ceramic-diaphragm floor-standers were being used in more than one room—Conrad-Johnson was also using them, in their first "live" Show dem in two decades—but I was drawn into the Kubala-Sosna room by the sound of Jimi Hendrix playing "Born Under a Bad Sign." Source was a Korg DSDx2 recorder, which Joe Kubala had used to record the track from LP, and the sound, with Audio Research Reference 5 preamp, Tenor 350M monoblocks, and Kubala-…