Progress is not an illusion
Sonically, the CTH-8550 was very much a twin of darTZeel's NHB-108 power amp: fast, dynamic, and detailed. On "Skeleton," from the Ginger Baker Trio's Falling Off the Roof (CD, Atlantic 82900-2), the CTH-8550 balanced the…
search
Description: Solid-state integrated amplifier with moving-coil phono section, remote control. Inputs: 4 pairs line (RCA), 1 pair balanced (XLR), 2 pairs Zeel (BNC), 1 pair MC phono (RCA). 1 pair MM phono (RCA, optional). Outputs: preamplifier (RCA), Record (RCA), darT (BNC), speaker (4mm binding posts). Maximum output power: 200W into 8 ohms (23dBW), 330W into 4 ohms (22.2dBW), 330W into 2 ohms (19.2dBW), "limited by software." Maximum voltage gain: 0–22dB, user-defined, 12dB as supplied (line stage); 50–70dB, user-defined (MC phono stage). Power stage voltage…
Digital Source: Ayre C-5xeMP universal player.
Integrated Amplifier: Boulder 865.
Loudspeakers: Klipsch Palladium P-39F, Thiel CS3.7, YG Acoustics Anat Reference II Professional.
Cables: Interconnect: Shunyata Research, Stealth Metacarbon. Speaker: Shunyata Research, Stealth Dream. AC: Shunyata Research Hydra & King Cobra & Anaconda.
Accessories: Ayre Acoustics Myrtle Blocks, Furutech RDP panels, RealTraps Mini & Mondo Traps.—Wes Phillips
I examined the darTZeel CTH-8550's measured behavior using mainly Stereophile's loaner sample of the top-of-the-line Audio Precision SYS2722 system (see the January 2008 "As We See It" and www.ap.com); for some tests, I also used my vintage Audio Precision System One Dual Domain.
Before performing any tests on an amplifier, I run it for 60 minutes at one-third its specified power into 8 ohms, which is thermally the worst case for an amplifier with a class-B or -AB output stage. Cold out of the box, the darTZeel offered 0.083% distortion at one-third power…
Description: Two-way, sealed-box, stand-mounted loudspeaker. Drive-units: 0.9" (22mm), ferrofluid-cooled, soft-dome tweeter; 6" (150mm), ep38 plastic-cone woofer. Crossover frequency: 4.8kHz. Frequency response: 75Hz–20kHz, ±3dB. Sensitivity: 85dB/2.83V/m, anechoic. Dispersion: within 3dB of response on reference axis, horizontal over 40° arc (±20°), vertical over 20° arc (±10°). Harmonic distortion (measured at 90dB/m): <1%, 100Hz –20kHz. Impedance: 8 ohms nominal, 6.3 ohms minimum. Power handling: 125W unclipped program.
Dimensions: 12" (305mm) H by 6.5…
Digital Sources: Ayre C-5xeMP universal player; Boulder 1021, Meridian 808i.2 CD players; Benchmark DAC 1 D/A converter; Logitech (Slim Devices) Transporter WiFi music player with Apple Mac mini for media storage; dCS 972 D/D converter.
Preamplifiers: Simaudio Moon Evolution P-8, Parasound Halo JC 2.
Power Amplifier: Simaudio Moon Evolution W-7.
Loudspeakers: PSB Imagine B, Rogers BBC LS3/5a (1978 vintage).
Cables: Digital: Kimber Illuminations Orchid AES/EBU, Stereovox CV2 electrical S/PDIF, AudioQuest OptiLink-5 S/PDIF. Interconnect (balanced…
A speaker as small as the Spendor SA1 can't be expected to offer a high voltage sensitivity; my measurements indicated that it was a little more sensitive than the BBC LS3/5a, at 83dB(B)/2.83V/m, though this is 1dB lower than specified. Offsetting the Spendor's need for volts is its high impedance. Fig.1 shows the speaker's impedance and electrical phase, the former plotted on a wider 5dB/division scale rather than our usual 2dB/division. The sealed enclosure is tuned to 80Hz, indicated by the impedance peak of 46 ohms at that frequency. The impedance drops below…
From the outset, Bligh complains about his cabin's not being cleaned properly. In an effort to save time and ingratiate himself with his superiors, Bligh ill-advisedly attempts to round the Horn in winter, and the Bounty is almost completely inundated by a huge wave…