It was awesome to see the limited edition <a href="http://www.stereophile.com/floorloudspeakers/dynaudio_sapphire_loudspea… Sapphire</a>, cloaked in a stunning clear blue piano lacquer over a veneer of bird’s eye maple. The sound was just as fine: cymbals and horns had a natural bite, without edge or glare, blooming and blooming and blooming into the room.
In addition to the <a href="http://blog.stereophile.com/rmaf2010/soundsmith_cartright/">Cartright cartridge setup tool</a>, Soundsmith was showing the new EZ-Mount cartridge screws ($29.99, review to come from Michael Fremer), which allow for easy cartridge installation; Soundsmith’s new top-of-the-line Sussurro Paua moving-iron cartridge ($3499), inspired by Frank Schroder; the special edition, VPI-branded Zephyr high-output cartridge ($999), designed for use with VPI and other unipivot tonearms; and the neat, little “Intuitive” tool ($49.99), designed to make simple, precise adjustments of tracking force and azimuth to VPI tonearms!
If the Soundsmith room had been a van, it would have been rocking. (Hee-haw.) Seriously, there was a party going on in here and Peter Ledermann was the master of ceremonies, cueing up one record while a second was playing. But before I could take a seat, I was mesmerized by this awesome-looking device, the Soundsmith Cartright ($899.95, due early 2011), which resembles some sort of old-school, psychedelic Electro-Harmonix stomp box, but promises to simplify cartridge setup.
I caught up with the always affable Lars Goller of Gamut who was very proud of the company’s new S Series speakers. Here we see Goller standing beside the S5 ($30,000/pair), which boasts a very attractive cabinet made of form-pressed solid wood over multi-layered Finnish Beech ply. Externally machined canals in the speaker’s side panels divide the speaker into segments to better control vibrations and minimize coloration, Goller explained. In addition, two large port openings of 5mm-thick solid machined aluminum are threaded directly into the speaker’s rear panel to minimize port turbulence and noise.
It was a pleasure to meet with Genesis Advanced Technologies’ Carolyn Koh and Kosmic’s Joe Pittman in “one of the few rooms where everything is made in the USA.”
Kosmic’s Joe Pittman stands beside a Sota Millenia turntable equipped with a Kosmic tonearm and Magic Diamond cartridge, sitting atop a Kosmic equipment rack. Kosmic, a company that was new to me, manufacturers a tonearm, a music server, and equipment racks, which seemed like a strange product line. When I asked Pittman about it, he simply replied that all three areas are integral to the overall performance of any system. The Kosmic Server ($2295 with 500GB hybrid drive) stores approximately 1600 CDs in FLAC format, and provides FireWire and USB 2.0 output up to 32-bit/384kHz sampling rates and TosLink up to 24/96. Kosmic is located in Seattle, WA, and is also a dealer for Genesis loudspeakers.
Composer and artist Joel Durand (left, who in his free time designs <a href="http://www.durand-tonearms.com/">beautiful tonearms</a>) and TTWeights’ Larry Denham flank the mightily impressive Black Onyx turntable ($15,000).
I had been aware of TTWeight’s line of beautifully crafted, heavy-duty phono accessories—center weights and clamps, outer rings, and mats—and while I knew that TTWeight’s Larry Denham also designed turntables, it wasn’t until seeing them in person that I fully understood the extent to which Denham has gone in perfecting his designs. Turntables aren’t just a hobby or side project for Denham.
Clean and refreshing music and sound in the Audioengine room, from left: A5 active loudspeaker ($349/pair), P4 passive loudspeaker ($249/pair), N22 desktop amplifier ($199), and A2 active loudspeaker ($199; <a href="http://www.stereophile.com/budgetcomponents/1207ae/index.html">reviewed by Bob Reina</a>).
I wonder if our expectations drop somewhat when walking into a room occupied by small, inexpensive, neatly organized gear. The contrast from the massive, overwrought, wildly expensive components found in some rooms is undeniably refreshing, and might allow the music to take center stage. Such is always the case with Audioengine, makers of adorable loudspeakers whose quality belies their small size. The more I learn about the company and the more time I spend with their speakers, the more it seems that they’re here to stay. In fact, I expect great sound from Audioengine. The company simply continues to <i>surpass</i> my expectations.