|
Recent Additions
Budget Components Audacious Audio J. Gordon Holt
Loudspeakers
Amplification
Digital Sources
Analog Sources
Accessories Listening / Art Dudley The Fifth Element / John Marks Music in the Round / Kal Rubinson Fine Tunes / Jonathan Scull Special Features Reference Interviews Think Pieces Historical Recording of the Month Records 2 Die 4 Music/Recordings Stephen Mejias Robert Baird Fred Kaplan Wes Phillips Audio News Past eNewsletters RMAF 2009 SSI 2009 CES 2009 RMAF 2008 FSI 2008 CES 2008 RMAF 2007 CEDIA 2007 HE 2007 FSI 2007 CES 2007 China 2006 RMAF 2006 HFN 2006 CEDIA 2006 HE 2006 FSI 2006 CES 2006 Forums Galleries Vote Previous Votes AV Links Audiophile Societies Contact Us Customer Service New Subscription Digital Subscription Renew Give a Gift Sub Services Recordings Backissues More . . . Phono Preamp Hi-Fi Phono Cartridge Amplifiers Stereo Speakers |
Audio Research Reference 1 preamplifier & VT200 power amplifier:
Reference 1 preamplifier: Tubed line stage with remote control. Inputs: Tape, Tuner, Phono, CD, Video, Aux 1, Aux 2, Aux 3 (XLR and RCA connections). Outputs: 2 main, 1 tape (XLR and RCA connections). Tube complement: eight 6922/E88CC dual-triode (vacuum tube audio circuit, solid-state power supply). Frequency response: 1Hz–200kHz, ±0.5dB. Distortion: <0.015% @ 4V RMS, balanced output. Gain: 12.3dB balanced, 6.3dB single-ended at main output; 0dB at tape output. Input impedance: 220k ohms balanced, 110k ohms single-ended. Maximum input: 7.0V RMS balanced, 3.5V RMS single-ended. Output impedance: 400 ohms balanced, 200 ohms single-ended, 20k ohms minimum load recommended, 200pF maximum capacitance. Rated outputs: 4V RMS, 2V RMS single-ended into 100k ohm balanced load. (Maximum balanced capability is 30V RMS @ <0.5% THD @ 1kHz.) Noise: 13µV RMS residual noise (IHF-weighted), balanced output with gain minimum (110dB below 4V RMS output, 93dB below 2V RMS single-ended output). Power requirements: 100-135VAC, 60Hz (200–270VAC, 50/60Hz); 90W maximum. VT200 power amplifier: dual-mono tubed power amplifier with ultralinear output stage. Tube complement: eight 6550C in matched pairs, ten 6922 (six driver, four input). Output power: 200Wpc continuous into 8 ohms (23dBW), 20Hz-20kHz. THD @ 1kHz: typically 1% @ 200W, <0.01% @ 1W. Power bandwidth: 12Hz–120kHz, -3dB. Frequency response: 0.5Hz–200kHz, -3dB @ 1W. Input sensitivity: 2.5V RMS, balanced or single-ended (27dB gain into 16 ohms). Input impedance: 200k ohms balanced, 100k ohms single-ended. Output taps: 1, 2, 4, 8, 16 ohms. Output regulation: approximately 0.8dB with 16 ohm load to open circuit (damping factor approximately 11). Overall negative feedback: 10dB. Slew rate: 25V/µs. Rise time: 1.5µs. Hum & noise: <0.2mV RMS, 109dB below rated output (IHF weighted, input shorted, 16 ohm output). Power-supply energy storage: approximately 674 joules. Power requirements: 105–125VAC, 60Hz (210–250VAC, 50Hz); 990W at rated output; 1200W maximum; 680W at idle. Both: Approximate number of dealers: 65.
Article Continues: Associated Equipment »
|
||||||||||||||||||||||||||||||||||||||||||


