Floor Loudspeaker Reviews

Sort By: Post DateTitle Publish Date
Floor Loudspeaker ReviewsAudacious Audio
Wilson Audio Specialties Alexandria XLF loudspeaker
Michael Fremer  |  Dec 28, 2012  |  64 comments
The Wilson Audio Specialties Alexandra XLF costs $200,000/pair. So does a Ferrari. Perhaps if Wilson Audio Specialties sold as many pairs of XLFs as Ferrari sells cars, the price might drop. For now, $200,000 is what you pay.

Can a loudspeaker possibly be worth that much? Add $10,000 for speaker cables, and that's what I paid for my first home in 1992. Today, the average American home costs around $272,000, which is likely less than the cost of an audio system built around a pair of Alexandra XLFs.

Continue Reading »
Floor Loudspeaker ReviewsAudacious Audio
Wilson Audio Specialties Alexia loudspeaker
John Atkinson  |  Dec 02, 2013  |  11 comments
With the help of 20:20 hindsight, it looks as if I made a decision when I joined Stereophile: to review a loudspeaker from Wilson Audio Specialties every 11 years. In June 1991, I reported on Wilson's WATT 3/Puppy 2 combination, which cost $12,740/pair in an automotive gloss-paint finish. This was followed in July 2002 by my review of the Wilson Sophia ($11,700/pair). And now, in December 2013, I am writing about the Wilson Alexia, which costs a not-inconsiderable $48,500/pair.
Continue Reading »
Floor Loudspeaker Reviews
Wilson Audio Specialties Alexia Series 2 loudspeaker
John Atkinson  |  Jun 14, 2018  |  107 comments
One of the benefits of being a reviewer is that, of the large number of products that pass through my listening room, occasionally there are those that I really would like to see take up more permanent residence. One of these was Wilson Audio Specialties' Alexia loudspeaker, which I reviewed in December 2013. "Its clarity, its uncolored, full-range balance, its flexibility in setup and optimization, and most of all its sheer musicality, are, if not unrivaled, rare," I wrote, and concluded: "If I were to retire tomorrow, the Wilson Alexia would be the speaker I would buy to provide the musical accompaniment to that retirement." Nothing I subsequently heard disabused me of that dream, though a couple of other speakers, in particular Vivid Audio's Giya G3 and KEF's Blade Two, joined the Alexia on my bucket list.
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Alexia V loudspeaker
Jason Victor Serinus  |  Dec 22, 2022  |  19 comments
In the very first copy of Stereophile I encountered, back when issues were digest size, one review infuriated me. The writer went on at inordinate length about the fine wines he'd consumed during the review period. On and on he went, gushing about the costly drinks, until I exclaimed (in a sentence laced with expletives), "What in the world does any of this have to do with audio?!"
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Alexx loudspeaker
Michael Fremer  |  Apr 27, 2017  |  33 comments
Having discontinued the MAXX3 loudspeaker ($68,000/pair in 2009, when I reviewed it), Wilson Audio needed to plug the resulting gaping hole between the Alexia ($48,500/pair) and the Alexandria XLF ($210,000/pair). Company founder Dave Wilson was busy with the limited-edition WAMM Master Chronosonic loudspeaker ($685,000/pair), so son Darryl Wilson set about creating a speaker with a retail price of about $100,000/pair. The result, the Alexx, finally came in at $109,000/pair.
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Alexx V loudspeaker
Jim Austin  |  Nov 17, 2021  |  22 comments
The Wilson Audio Specialties Alexx V ($135,000–$151,000/pair) is the biggest, heaviest, most expensive loudspeaker I've had in my listening room. It replaces the original Alexx in Wilson's lineup; Michael Fremer reviewed the earlier Alexx, bought it, and owned it until replacing it recently with the Wilson Chronosonic XVX.
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Chronosonic XVX loudspeaker
Michael Fremer  |  Apr 23, 2021  |  23 comments
Brand-fan excitement ran high among consumers and reviewers alike when Wilson Audio Specialties announced that it would roll out a nonfunctioning prototype of the Chronosonic XVX at the 2019 Rocky Mountain Audio Fest (RMAF). The Chronosonic XVX was rumored to be a replacement for the $210,000/pair Alexandria XLF, offering performance similar to that of the $850,000 WAMM Master Chronosonic system (including two Master Subsonics and a controller) at a less breathtaking price. (You won't catch me writing "affordable" here.) The static unveiling at RMAF intensified anticipation.
Continue Reading »
Floor Loudspeaker ReviewsAudacious Audio
Wilson Audio Specialties MAXX loudspeaker
Martin Colloms  |  May 11, 1999  |  0 comments
It's been five years since David Wilson's X-1/Grand SLAMM speaker system invaded our audio consciousness with its 500W power capacity and very high (95dB/W) sensitivity (footnote 1). Capable of an earsplitting 123dB at 1m, with a bandwidth to match, this was one speaker system that refused to be ignored. The X-1 has since evolved to $70,000/pair Mk.II form. It now provides some flexibility of tonal balance for different room acoustics, and is distinguished by greater subtlety in its differentiation of timbre. Beneath the X-1 in Wilson's range comes the WATT/Puppy ensemble, now in its 5.1 iteration (footnote 2). The WATT/Puppy has survived for over 10 years, and sets a benchmark for the Wilson line at its $17,270 system price.
Continue Reading »
Floor Loudspeaker ReviewsAudacious Audio
Wilson Audio Specialties MAXX Series 3 loudspeaker
Michael Fremer  |  Sep 14, 2009  |  0 comments
Though taller, narrower, deeper, more gracefully sculpted, and even more mantis-like than the MAXX Series 2 that I reviewed in the August 2005 Stereophile, at first glance the Wilson Audio Specialties MAXX Series 3 seems little more than a minor reworking of its predecessor with a major increase in price: from $44,900 to $68,000 per pair. But first looks can be deceiving. Take a closer, longer gaze—or, better yet, spend some time listening (especially if you've spent time with the MAXX 2)—and you'll quickly realize that while the familiar Wilson design concepts remain in play, the MAXX 3 is far more than a minor reworking of an older model.
Continue Reading »
Floor Loudspeaker ReviewsAudacious Audio
Wilson Audio Specialties MAXX2 loudspeaker
Michael Fremer  |  Aug 14, 2005  |  0 comments
When Wilson Audio Specialties' Peter McGrath offered me a pair of MAXX2 loudspeakers to review, I reminded him of just how small (15' by 21' by 8') my room is, and how close I sit to any speakers in it.
Continue Reading »
Floor Loudspeaker Reviews
Wilson Audio Specialties Sabrina loudspeaker
Robert Deutsch  |  Apr 21, 2016  |  13 comments
I first encountered the work of Dave Wilson in the late 1970s. He was then a recording engineer responsible for some great-sounding records, including pianist Mark P. Wetch's Ragtime Razzmatazz (LP, Wilson Audio W-808), which quickly became one of my favorite system-demo records.

Then Wilson turned his attention to designing loudspeakers. His first model was the Wilson Audio Modular Monitor, reviewed for Stereophile by its then-publisher, Larry Archibald, in August 1983, who described it as "the most enjoyable speaker system I've listened to, and significantly valuable as a diagnostic tool." At $35,000/pair ($83,577 in today's dollars), the WAMM may have been the most expensive speaker then on the market.

Continue Reading »
Floor Loudspeaker Reviews
Wilson Audio Specialties SabrinaX loudspeaker
Brian Damkroger  |  Feb 19, 2021  |  68 comments
Many companies in high-end audio and elsewhere use a trickle-down approach to advance their products. The process begins with the development of a suite of new technologies, capabilities, components, or whatever the relevant entities might be. Typically, it's a flagship product that functions as the impetus, target, and first deployment of the new technologies. Subsequently, the new technologies trickle down to other models, each one incorporating a subset appropriate to its price point.
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Sasha DAW loudspeaker
Sasha Matson  |  Dec 20, 2019  |  23 comments
There is change, and also continuity, at Wilson Audio Specialties, the company founded in 1974 by recordist and loudspeaker designer David A. Wilson. David's son Daryl Wilson was appointed president and CEO in 2016. David Wilson passed away in 2018. And in 2019, Wilson Audio Specialties released the Sasha DAW loudspeaker ($37,900/pair), designed by a team led by Daryl Wilson and named in honor of his father.
Continue Reading »
Audacious AudioFloor Loudspeaker Reviews
Wilson Audio Specialties Sasha V loudspeaker
Sasha Matson  |  Jan 25, 2024  |  21 comments
Wilson Audio's new Sasha V loudspeaker (that's "V" as in victory, not "five") extends the line that began in 2009 with the debut of the Sasha 1 model. The installation manual includes a page titled "Sasha Evolution," with elegant line drawings of the various versions of the Sasha loudspeaker—now four—which were preceded by the two-box WATT/Puppy combo, which dates from 1989. The Wilson Audio Specialties Sasha V ($48,900/pair) replaces the prior Sasha model, the Sasha DAW, in the Wilson lineup.

The hefty, floorstanding Sasha V maintains a close family resemblance. The new Sasha's width and height are almost identical, logging 14½" and 45 1/16", respectively. The cabinets gain an inch in depth and now measure 23 15/16". The cabinets' subtle beveling is slightly different; probably only recent Sasha owners would notice. Extra thickness in the cabinets adds 9lb for a total of 245lb per speaker.

Continue Reading »
Floor Loudspeaker Reviews
Wilson Audio Specialties Sophia loudspeaker
John Atkinson  |  Jul 14, 2002  |  0 comments
Of the small number of times I have been totally swept away by listening to recorded music, a significant proportion have involved loudspeakers from Wilson Audio Specialties. It was my experience of their X-1/Grand SLAMM in the listening rooms of reviewer Martin Colloms, then-retailer Peter McGrath, designer Dan D'Agostino of Krell, and manufacturer Madrigal Audio Labs, that led me to name it my "Editor's Choice" for 1995 and join my vote with those of the Stereophile scribes to make it the magazine's "Loudspeaker of the Year." I wrote in my December 2001 "As We See It" about how a cross-country road trip had begun with a listen to the Cantus CD on the Wilson WAMMs in their designer's Utah listening room. And, as I wrote in my April column, auditioning Peter McGrath's 24-bit Nagra-D master tapes on Wilson MAXXes in the Halcro room was, for me, the highlight of the 2002 CES.
Continue Reading »

Pages

X