Columns Retired Columns & Blogs |
May 14, 2008 - 8:36pm
#1
Repair or throw out AR-48 speakers
Loudspeakers Amplification | Digital Sources Analog Sources Featured | Accessories Music |
Columns Retired Columns & Blogs |
Loudspeakers Amplification Digital Sources | Analog Sources Accessories Featured | Music Columns Retired Columns | Show Reports | Features Latest News Community | Resources Subscriptions |
If you need to spend money on other parts of the system and this amount of money would buy a better source (CD player or turntable) or amplifier, repair the speakers. Otherwise, if you can manage to buy what you like and still have $300 for speakers, write off the AR's and buy new. Speakers have improved considerably in this price range since the AR's were on the market.
If he liked the sound of the AR-48s by all means just refoam the drivers. Unless someone was careless with them I doubt they need new cones. Those are 80s vintage so the caps are probably OK as well.
For more information on reconditioning Acoustic Research speakers try: http://www.classicspeakerpages.net/IP.Board/index.php?showforum=3
Very few things are more fun (or maddening depending on who you ask) then demo’ing new speakers.
If you’ve never repaired speakers before it’s not that hard. However, visiting your closest high end audio store with a curated playlist is infinitely more enjoyable. And there’s the post listening session martini and burger which is way better than the smell of rubber cement and reading lousy instructions.
I had my Henry Kloss designed Advent speaker refoamed at Midwest Speaker here in the Midwest for $70
They sound amazing with the right power and placement and I even built custom Black walnut isolation stands for them.
The caveat to making my Advents really shine if offering them a bonafide minimum 75W per channel power which to my knowledge is indicative of old school passive speakers. You put serious clean power behind them and they come alive. Ideally I would be at 100W per channel but a guy needs to budget to get all this gear.
Hi there - normally, as a big vintage audio fan myself, I would say fix those suckers and enjoy! Are you buying brand new, or just new-to-dad speakers? Is the rest of his gear vintage or not? Just wondering because if buying new, you may find the power requirements for modern speakers a bit of a stretch for lower powered vintage amplification. Back in the day, when amps were commonly in the 15 - 30 watt / channel category, speaker efficiency was quite a bit higher (generally speaking) than it is now. Perhaps you should either fix up the ARs (new foam and recap the crossovers - an easy DIY job) or seek out some other vintage high efficiency speakers from the likes of Boston.
I will add as a note though that there are serious bargains to be had in the modern-era speakers, maybe those models in the 10 - 2- year old bracket. Whilst not vintage, they are old enough to be popping up in Facebook listings etc. I picked up a pair of Totem Tabu with stands yesterday, for just $350. If you look at what they cost new, that's a total bargain. They are 85.5Db efficient (so kinda inefficient) but for me they drive fine with my little NAD amp.