Michael Fremer

Sort By: Post Date | Title | Publish Date
Michael Fremer  |  Jan 29, 2008  |  0 comments
Stop me if you've heard this one: Back in the early 1990s, just after the fall of the Soviet Union, I debated professor of music engineering and magazine columnist Ken Pohlmann on a talk show on the CBS radio network. The subject was analog sound vs digital sound, but I guess when Pohlmann felt I was getting the upper hand, he felt he needed to play the tube card. Derisively, he said, "I bet you're one of those tube guys, too, aren't you?" Before I could open my mouth, he continued: "You know, the Soviet Union's military gear, including the MIG fighters, ran on tube electronics, and look what happened to them!"
Michael Fremer  |  Apr 26, 2011  |  0 comments
The VTL MB-450 series began life in the late 1980s as the Deluxe 300, a pair of which I once owned. Over the years the basic design has been improved and modified, in the forms of the MB-450 (1996) and the MB-450 Series II (which I reviewed in January 2008). The tube complement remains the same: eight 6550s in the push-pull output stage, a 12AT7 input tube, and a 12BH7 driver. Into a 5 ohm load, the MB-450 III is claimed to produce 425W in tetrode mode or 225W in triode, from 20Hz to 20kHz.
Michael Fremer  |  May 02, 2014  |  0 comments
Big tube amplifiers were once scary monsters reserved for those who didn't mind heavy maintenance, careful tweaking, and the occasional explosion. Blown tubes required replacing, preferably with pricey matched pairs, then biasing with a voltmeter. Optimal sonic performance required regular bias monitoring and adjusting, and because of current surges on startup, you had to choose between leaving the heat-producing monoliths on, or turning them on and off for each listening session, thus shortening the life of the tubes.
Michael Fremer  |  Jul 10, 2004  |  First Published: Jul 01, 2004  |  0 comments
Leaving aside for a moment the fact that the Wavac SH-833 costs $350,000/pair—
Michael Fremer  |  Nov 18, 2001  |  0 comments
What's a pro audio company doing at CES?
Brian Damkroger, Michael Fremer  |  Dec 24, 2005  |  First Published: Mar 24, 2005  |  0 comments
Like the $29,000 Boulder 2008 phono preamplifier, the new Whest PhonoStage.20 with its MsU.20 power supply costs as much as a car. Fortunately for you, that car happens to be my first new Saab, which cost exactly $2737 back in 1972. The solid-state Whest costs $2595, so it's a few hundred dollars cheaper. But at only a tenth the cost, it comes closer to the Boulder 2008's performance than it has any right to. That it's good enough to be mentioned in the same paragraph should tell you something about how good I think it is. Nor did it come to me hyped by the manufacturer—it took me by surprise from the minute I first heard it. I began my listening right away, before reading anything about the circuit design.
Michael Fremer  |  Dec 28, 2012  |  64 comments
The Wilson Audio Specialties Alexandra XLF costs $200,000/pair. So does a Ferrari. Perhaps if Wilson Audio Specialties sold as many pairs of XLFs as Ferrari sells cars, the price might drop. For now, $200,000 is what you pay.

Can a loudspeaker possibly be worth that much? Add $10,000 for speaker cables, and that's what I paid for my first home in 1992. Today, the average American home costs around $272,000, which is likely less than the cost of an audio system built around a pair of Alexandra XLFs.

Michael Fremer  |  Apr 27, 2017  |  33 comments
Having discontinued the MAXX3 loudspeaker ($68,000/pair in 2009, when I reviewed it), Wilson Audio needed to plug the resulting gaping hole between the Alexia ($48,500/pair) and the Alexandria XLF ($210,000/pair). Company founder Dave Wilson was busy with the limited-edition WAMM Master Chronosonic loudspeaker ($685,000/pair), so son Darryl Wilson set about creating a speaker with a retail price of about $100,000/pair. The result, the Alexx, finally came in at $109,000/pair.
Michael Fremer  |  Apr 23, 2021  |  23 comments
Brand-fan excitement ran high among consumers and reviewers alike when Wilson Audio Specialties announced that it would roll out a nonfunctioning prototype of the Chronosonic XVX at the 2019 Rocky Mountain Audio Fest (RMAF). The Chronosonic XVX was rumored to be a replacement for the $210,000/pair Alexandria XLF, offering performance similar to that of the $850,000 WAMM Master Chronosonic system (including two Master Subsonics and a controller) at a less breathtaking price. (You won't catch me writing "affordable" here.) The static unveiling at RMAF intensified anticipation.
Michael Fremer  |  Sep 14, 2009  |  0 comments
Though taller, narrower, deeper, more gracefully sculpted, and even more mantis-like than the MAXX Series 2 that I reviewed in the August 2005 Stereophile, at first glance the Wilson Audio Specialties MAXX Series 3 seems little more than a minor reworking of its predecessor with a major increase in price: from $44,900 to $68,000 per pair. But first looks can be deceiving. Take a closer, longer gaze—or, better yet, spend some time listening (especially if you've spent time with the MAXX 2)—and you'll quickly realize that while the familiar Wilson design concepts remain in play, the MAXX 3 is far more than a minor reworking of an older model.

Pages

X