Spectral X-Contamination: Problems in Op-Amp Chips The Pink Floyd Connection

40 years ago—"is the English way"...


Electronics for the greatest hi-fi show on earth

It's the 8th of August 1980 and Ben Duncan (top left), hand resting on his famous investigative clipboard, is leaning against the Pink Floyd The Wall concerts' huge front-of-house mixing setup, inside Earls Court, West London. The crew are getting ready for sound-check. It's the second night of a world tour, and there have been some teething problems. In front of the alleyway of racked outboard equipment, are an amazing 105 channels made with joined-up English Midas Pro4 consoles. These were built like tanks, lit like Las Vegas on tranquilizers (yellow illuminated meters, red and green LEDs galore, and UV-sensitive legend), with perfectionist metalwork and electronics engineering.

The heroic main designer, burnt-out by the feat, vanished. Like an echo of Syd Barrett.

Looking at the vast and inspiring schematics, gifted to the author in a Surrey country pub's yard a few months later by Midas's CEO Dave Solari, the Pro4 was years ahead of others, designed mid-1970s and updated in '78 with the new Mullard TDA 1034 single op-amp, an English/Dutch secret weapon, being the first op-amp made for serious audio. At about $80 a pop, today. Later cased in plastic and renamed NE5534 when production moved to Signetics' factory in US, which Mullard/Philips had acquired.

Millions of humans worldwide can attest to the sonic quality of a Pink Floyd show. Even Iron Maiden (who were doing their first tour at the time) cannot come close for dynamics and bombast.

The TDA 1034 is as asymmetrical as most op-amps, and there wasn't any symmetrical or bridged circuitry in the Pro4's myriad signal paths. Even the coupling capacitors were DC-biased, which like synth pads in deep ambient house music, and the Hammond B3 before, inject warm harmonics dynamically—a discovery made about biased capacitors, but possibly misunderstood, 25 years later, by Cyril Bateman.

Soon, big consoles could be more compact and might need a smaller crew to move them. But the use of dual and quad op-amps that helped enable this, we now know cannot have helped music purity. With the Floyd shows, audiences were often ear/awe-struck into silence—low-level details like reverb tails were as audible as in high-end home listening. Being also a recording console, a vinyl detective could track down which studios used this later TDA-based Midas Pro4, and figure which albums were recorded through it.

A decade later, Pink Floyd serially toured the world with seismic diva Durga McBroom on backing vocals and advanced English Turbosound horn speakers on PA, driven by EPC-780 amplifiers designed by genius Stan Gould (who also disappeared), guided by the author. The maker, BSS, was an offshoot of Midas. Inside was an Asymmetric bridge...aha!, operating in progressive class-A, then rich class-A/B then -G/H. With MOSFETs.

With pleasant sonics and orgasmic dynamics to match. "High Fidelity/first class" defines 40 years of Pink Floyd live shows.—Ben Duncan

The Author

40 years on—Ben Duncan busy working on a new product.

Ben Duncan began inventing, designing, making, modifying and mending electrical, electronic and audio equipment at age 9. This has not stopped. At boarding school, he took over the physics lab. Skip to 1978, BD was projected into the vanguard of pro-audio, publishing articles in magazines, designing a giant road-going tractrix horn, and making sonically superior equipment using TDA1034 ICs—aided by colleague Harry Day, bespoke mixing console maker, who imported them from the factory in Holland.

Ben Duncan soon met and worked with London's topnotch (read: audiophile) PA system operators and their sound engineers—them on never-ending tours across England, Europe or the US/the World, with an A–Z of UK and US artists. This lead to designing and contributing to, many of Britain's best-regarded professional power amplifiers, working with Jerry Mead, Stan Gould, and others.

COMMENTS
CG's picture

Very interesting reading.

There's far too much to comment upon here. Not the time or place... (Not to correct, but to ask for expansion. More of this would be great!)

One comment I will make. As Mr. Duncan pointed out, IM products tend to rise and fall over real time as the relative phases of the contributing signal components change. Other effects, such as thermal changes, also create different distortion patterns over time. This is why averaging the spectrum can be misleading.

If you look at the distortion spectrum over time with a more or less real time spectrum analyzer, you can see these peaks changing. The distortion products when averaged look like bumps in the noise floor. But, if you zoom in, they're more like fields of grass swaying in the wind. This isn't unique to audio systems - you can see the same thing with various RF systems as well.

What you really hear in an audio system are the peaks of each distortion product as they change over time, not so much the averaged signal power. Listening to plain old noise is a constant change of spectral content and levels. You can hear that.

One immediate burning question - why do these design guys disappear into the aether so often?

John Atkinson's picture
CG wrote:
One immediate burning question - why do these design guys disappear into the aether so often?

From an email I received from Ben Duncan this afternoon: "I am gathering quite a list of Electronic Engineers who have been broken by the mental ordeal of designing and putting perfectionist products into production."

John Atkinson
Technical Editor, Stereophile

CG's picture

And, I'm not even in the audio biz.

But, the glory, heart felt appreciation of the customers, and the money makes up for it. Oh - wait...

Bogolu Haranath's picture

.... and all those 'electronic engineers who have been broken by the mental ordeal', are now listening to and designing, single ended, class-A, zero feedback, triode tube amps :-) .......

tonykaz's picture

I made an attempt at selling perfectionist audio products.

The perfectionist aspect is the consumer, not the Product.

Audiophiles are neurotic & psychotic.

Perfection is a moving target that Guru types review and approve ( this month ).

The headphone world seems to have an accessible and stable True-North relating to Sound Quality ( perhaps because there isn't a $50,000 Headphone Amplifier just being released )

Tony in Venice

Bill Whitlock's picture

The late Deane Jensen co-authored an AES paper (see https://www.aes.org/e-lib/browse.cfm?elib=4719) on this very subject and coined the term "spectral contamination" back in 1988. Available arbitrary waveform generators of the day had limited resolution, which limited the sensitivity of the relatively simple test. I'm hoping to revisit the subject and take advantage of the newest generation of test gear. I'm convinced that such a test is the missing link between what we hear and what we can measure because it reveals the non-harmonically-related distortion spectrum that's so irritating to our ears. For me, it also explains the widespread love of vacuum-tube and transformer containing audio gear! - Bill Whitlock, AES Life Fellow and owner/chief engineer of Jensen Transformers 1989-2014

CG's picture

First, thank you for the reply!

I *think* the problem isn't so much the generator of such signals as it is the spectrum analyzers used to measure the results. Or, at least, how those spectrum analyzers are used.

When you average a zillion sweeps to minimize the noise floor you get what we all see. Averaging reduces that noise because noise is random. But, essentially most of the potential problems then get averaged out, too. Even a 1 dB change in the measured floor because of a bunch of pseudo-random events just gets ignored. Plus, this noise floor is usually very much below other basic noise sources found in a typical listening room, or even out in the desert. So, how relevant is this averaged noise floor then, really? Humans listen to discrete events, not the average.

Now, if a measurer used a "Peak Hold" or "Max Hold" display function, I suspect there'd be more detection of audible problems. That certainly is true in communication systems. (I bet the main effect of investigating this sort of testing would be to create yet another path for decades of arguments between audiophiles...)

Of course, a suitable generator would make life as a measurer easier.

BTW, Brockbank and Wass had some thoughts on the subject back in 1945. I guess some ideas just never catch on.

Ortofan's picture

... for the mill:

http://nwavguy.blogspot.com/2011/08/op-amps-myths-facts.html

http://nwavguy.blogspot.com/2011/08/op-amp-measurements.html

https://www.edn.com/negative-feedback-in-audio-amplifiers-why-there-is-no-such-thing-as-too-much/

https://www.edn.com/negative-feedback-in-audio-amplifiers-why-there-is-no-such-thing-as-too-much-part-2/

John Atkinson's picture
Ortofan wrote:
http://nwavguy.blogspot.com/2011/08/op-amp-measurements.html

From that article: "At gains of 5X and higher nothing could beat the $0.65 NE5532 except by a few dB in noise performance."

The NE5532 is the dual version of the NE5534, an op-amp that, as described by Ben Duncan on this article's "The Pink Floyd Connection" page, started life as the high-audio-quality, metal-can Mullard TDA1034. I first encountered the NE5534 in the phono stage of the Meridian 101 preamplifier and used it in a microphone preamplifier circuit I designed in the early 1980s.

Also from that article: "The older TL072, despite being used in thousands of audio devices, is way out of its league against newer op amps."

The Quad 34 preamp (or was it the 44) used TL072s. I asked Peter Walker why, when even then there were better-performing op-amp chips available? He felt that saving his customers money outweighed any measured advantage of higher-performance chips.

John Atkinson
Technical Editor, Stereophile

CG's picture
What most people measure is but a subset of the actual operating performance of devices. That's true whether it's an opamp or an amplifier in a snazzy box. There are practical limits of what a for-profit company can and will do. Really dedicated amateurs might measure more if they had the resources, which they almost always do not.

In addition, those for-profit companies have budgets for every bill-of-material used in each product. They all cut costs where they think they can, unless they can find a good reason not to. Usually, that comes down to the marketing of a product and what the market is willing to pay.

That's not a knock on these companies. For every potential customer who might say, "That's great! Exactly what I want! The price is OK, too. Sold!", there's probably 873 who will consider the price first and foremost. (That could go either direction - Inexpensive might be a negative in many cases.) I don't envy the decisions and trade-offs they have to make.

What Ben Duncan's article highlights to me is that in general, we really don't fully understand what makes a sound system sound good. There are products with relatively high distortion compared to others that are beloved based on listening. Others that would seem to be great based on the traditional measurements, but don't sound as good. If you dig deeply enough, you can usually discover why one product sounds more appealing than another. It might not be obvious, and the conclusion will almost certainly be contentious. But, you can often find it.

So, who is going to do that? They don't give out many grants for hifi performance research these days. Magazine reviewers and their editors? I don't think they have the resources. One resource being time. I also don't envy the reviewers or editors for the choices they need to make...

Ortofan's picture

... to sing the praises of the 5532/5534. His 4-part article in EE Times, entitled “Op amps in small signal audio design”, includes a survey of various devices.
He does suggest, though, that the LM4562 might finally be an improved replacement for the 5532.
Likewise, the OPA2134 is suggested as an upgrade for the TL072.
https://www.eetimes.com/op-amps-in-small-signal-audio-design-part-1-op-amp-history-properties/

The QUAD 44 preamp used many TL071 op amps – the single version of the TL072.

One advantage of the single 5534 is that the compensation pins are brought out, which enables the possibility of bypassing the input stage for applications where lower input bias current is needed.
An old Siliconix FET databook includes an application note illustrating such a configuration. The normal input pins are connected to the negative supply rail and the bipolar input stage is replaced with a cascode connected pair of 2N5912 dual FETs. The balance and compensation pins then become inputs to the second stage differential transistor pair.
While the 2N5912 no longer seems to be readily available, the Linear Systems LS5911 is a substitute.

One wonders if it ever occurred to Peter Walker to offer a “deluxe” version of his preamp with better performance, from the use of higher performance devices, at a commensurately higher price?
He might have responded that the existing design already performed as a “straight wire with gain” and asked what more than that did you need?

invaderzim's picture

"This has left the world with a legacy of smeared, mangled recordings"

It is so sad that many of us will never know what these performers really sounded like. The true performers from when our equipment just wasn't up to the task of capturing their sound.
Paintings can be restored, manuscripts can be repaired and duplicated but we can't clean or recreate the sound and have it be correct.

CG's picture

Perhaps - some day.

A bigger concern might be the care, or lack thereof, the keepers of the master tapes have shown over the decades. A lot has been thrown out and a lot has been lost to fire. There's some indications that the recording companies have invested a bit more to keeping the recordings - the ones they make their money from, which is crazy if you think about it - stored better. But, an incredible amount has been plain lost forever. I'm sure that has been the case with written documents and other forms of art, but the record companies haven't even been willing to protect their own assets.

CG's picture

I wrote a considered reply to a comment above. Nothing remotely derogatory, inflammatory, or impolite. No bad words.

Gone! It was saved, as shown by the blank text box.

Oh well. This may be a message from the cosmos that posting comments on the internet is not for me.

John Atkinson's picture
CG wrote:
I wrote a considered reply to a comment above. Nothing remotely derogatory, inflammatory, or impolite. No bad words. Gone! It was saved, as shown by the blank text box.

I don't know why the text disappeared but I inserted it from the email I was sent alerting me that there had been a response to one of my postings.

John Atkinson
Technical Editor, Stereophile

CG's picture

Thanks!

I still think the cosmos is trying to tell me something though...

tonykaz's picture

it happens, from time to time.

You can go back a page, in your computer, to retrieve it and re-submit.

It only happens in Stereophile Comments.

Tony in Venice

sdunbar's picture

As an Applications Engineer for Texas Instruments, I can tell you that with advancements in process (smaller die) and packaging (smaller packaged devices) there is very little reason to use dual or quad packaged op-amps in pro-audio applications.

Yes, one can still save some money using dual/quad packages, but the need to use these packages to save space is relaxed.

The OPA1641 that is now already 10 years old and available in a small VSSOP package could be a good start. Other very capable devices are in smaller packages, such as SOT-23. There are literally 100's of devices to choose from, and there is no need to use exactly the same op-amp throughout an entire signal chain. Part of the discretion of design is to use the right part in the right place. Some areas maybe you can cut corners if you know what you're doing, others you cannot.

Linearity is of course the key to good reproduction. I have yet to see a widely accepted definition of a test for characterizing this parameter. Something based on a comb of multiple, yet non-harmonically related tones and then measuring the residual harmonic and IM distortion and expressed as an RMS value might be a good start. It would be necessary to reduce the tone amplitudes so that the peak/average ratio of the combination is still within the boundaries of the op-amp. But clearly there is plenty to argue about here.

CG's picture

There is this:

https://www.ap.com/technical-library/using-multitones-in-audio-test/

A test like this lets you examine the odd and even order IMD products. The fundamentals aren't eliminated, though. That probably could be handled through software trickery.

I'd think that an even more complete test would be to weight the levels of the applied test tones spectrally, so as to simulate some facsimile of the music/sound track/spoken word power distribution. There's higher levels in the lower frequencies than at 20 KHz. Why not shape the test signal? At the analysis end, you could also potentially use A-weighting to approximate the human's ear's sensitivity.

In addition, using some kind of peak hold measurement so that the maximum value in each FFT bin is saved would be desirable. Although averaging helps you look at very low levels because of the randomness of true noise, it also misses distortion peaks that occur when the relative phases of the distortion tones line up to add. You'd hear these peaks, but an averaging scheme would, well, average them them out to be less representative of the reproduced sound.

As for whether it would be widely accepted, I'd doubt it. You can't get anybody to agree on anything. Don't you agree? :8^)

sdunbar's picture

If one knows where the fundamentals are (because the test gear is generating them) and there are no FFT leakage artifacts, it should be simple matter to arithmetically subtract out the fundamentals, leaving the HD and IMD products behind.

Notice how far they have backed-off the magnitude of each tone? No doubt to manage the crest factor/peak-to-average ratio. I would think there are diminishing returns to adding more and more tones; you can argue that more tones better represents real audio, but at the same time you still need to be able to accurately extract the fundamentals and resolve the FFT.

Real audio tends to have lower amplitude content at higher frequencies so using the same amplitude for every tone is probably not the right thing to do, either.

All of this needs to boil down to a single "number" that can be used for comparison purposes. So, RMS of residual.

Surprised that IEEE hasn't standardized something like this decades ago. In a sense, audio is such a commodity now it really SHOULD have industry standards. Since audio is so dependent on linearity, seems like an obvious parameter to quantify.

But your right... it's hopeless.

CG's picture

In the CATV world they've long relied on multi-tone testing to determine the linearity of their systems. That analog testing has been done for at least 40 years. There is CTB - Composite Triple Beat - for odd order IMD products and CSO - Composite Second Order - for even order products. Plus SNR. Three numbers, but people understand what they mean. Today, that's gone away a bit, since the digital TV channels are QAM modulation, so the distortion artifacts are a little different than they were for plain ole analog TV channels. But, the new tests are similar.

In ye olde analog telephone days, the multiple analog channels were frequency division multiplexed so that you could get more than one phone call per line. In fact, they used groups that would let them get hundreds. There, the testing was done with white noise, with some small frequency bands notched out. During testing the noise power in the notched-out bands was measured and compared to the overall power, giving a single performance number called NPR - Noise Power Ratio. IMD of white noise is more white noise, so this gave them a sophisticated way to measure not only the distortion of a group of channels, but also the basic noise level. They pretty much stopped using analog phone channels in the 80's sometime. They were performance testing way before that.

I don't know what the answer is. Perhaps somebody ought to just put a stake in the ground for some sort of test and see how it progresses. The problem then becomes, just what can we hear and what is bad for sound reproduction?

sdunbar's picture

It’s impossible to argue with someone else about THEIR hearing ability. Certainly doesn’t work with my elderly mother-in-law living with us.

I'm the first to admit that my own ears are probably not that attuned. While my own mother had a degree in music and was a piano teacher, I completely squandered that opportunity... nevertheless, I did listen to quite a bit of audio growing up.

Not to be an "HLO", but my general assumption is that if someone/anyone can hear some difference, then that difference can be measured since we can build test equipment that is far more sensitive/perfect than our ears. This article seems to support that assertion.

What’s aggravating is when such a claim is made, but then we’re just expected to take the listener’s word for it- show me on an analyzer, please.

This is further obfuscated when certain distortion products are considered "pleasing" to some people. It's fine if you like the sound of second harmonic distortion, for instance, but from a recording and reproduction perspective, it's still distortion.

CG's picture

Two things...

One is that being even a virtuoso on an instrument, or many, is no guaranty that you're a good listener. My wife went to a fancy music school, played with and was tutored by several recognizable musicians there, and so on and so on. She tells me that most serious musicians aren't concerned with fidelity when they are listening. They've certainly listened to a lot of lousy sounding music in bad halls, just as they've listened to great sound. For them, they hear the musical intent in their head. They fill in the blanks. So, don't feel badly about that part.

(Fun fact: After getting critical, umm, "compliments" from their teachers, most of the voice majors would go sing to themselves in the porcelain lined rest rooms, just to make themselves feel better. Most everybody sounded glorious in there due to the natural reverb. Not sure if the tuba players did that. The pianists certainly didn't.)

Second thing is that just because it's probably possible that we could measure whatever distortion if we only tried, that's not what's done. Test equipment is good in that it often measures one characteristic at a time. But, to do that, it often trades off sensitivity for some of the bigger picture. A good example is the use of averaging and very narrow FFT bins to be able to capture teeny tiny harmonic products. As you pointed out, that not only doesn't exercise the DUT with regard to crest factor considerations, but the distortion products that are subject to the moving peaks are deliberately ignored. Can your hearing system do that?

sdunbar's picture

Certainly this has been discussed ad nausium elsewhere, but whether or not something "sounds good" or "sounds xxx" where xxx is your favorite audio related adjective, will always be a subjective matter.

For it to be objective, it would have to be time and space invariant, and since we cannot transplant ears, etc... from one person to another, it will remain subjective. Even the most attuned, demonstrably astute, refined listener is still engaging in an experience that by its very nature is subjective, and their descriptions of the experience must then be so as well.

Everyone also has their own tastes that can be tempered only so much, and it just becomes more subjective.

There is nothing wrong with this; that's just how it is. There are things about an audio signal chain that may be objective. Linearity performance, cross channel contamination (hence the article), noise floor, power consumption, etc... all of these things can be objectively compared through experiments that can be reproduced at will.

While nothing can be "perfect" we can certainly compare two specimens to see which is better in any particular dimension. My fear is, and this is probably why so many of these audio electronics engineers have vanished, is that despite desirable and measurable improvements in signal chains, there's still some "audiophile" who just doesn't like how it sounds.

When it become irrational, it's no longer fun for the engineer.

CG's picture

I think that when it gets in the way of making a living, that detracts from the fun in a big way.

Audio is not my livelihood, so that's easy for me to say.

All that said, I think there's still more that could be measured in a way that would help give better definition of what is better. Obviously, we're not there yet.

For me, it's far easier to make adjustments and then measure through listening. Jumping to the end is probably not right, but it's hobby.

Herb Reichert's picture

And bravo (!) Ben Duncan for such a broad, knowledgeable, cultured view of some very complex (and thorny) topics.

I am envious of your skills.

hr

Ortofan's picture

... "Hard-Line Subjectivists"?
By not doing so, is he revealing his own biases?

Worth reading is the referenced letter from Bob Orban (split over two pages):
https://www.stereophile.com/content/scientists-ivsi-audiophiles-1999-more-letters
https://www.stereophile.com/content/scientists-ivsi-audiophiles-1999-more-letters-part-2

John Atkinson's picture
Ortofan wrote:
Worth reading is the referenced letter from Bob Orban (split over two pages): https://www.stereophile.com/content/scientists-ivsi-audiophiles-1999-more-letters . . .

Also in the referenced article, a superbly written letter from the late Harvey Rosenberg: www.stereophile.com/content/scientists-ivsi-audiophiles-1999-more-letters-part-4.

John Atkinson
Technical Editor, Stereophile

CG's picture

Dr. Gizmo sure was great!

I'm not sure that digital can't sound great, but an awful lot of recordings that were digitized were done in a hurry, with not much care as to the sound. Or, maybe worse - some, ahh, creative engineer (probably coked up to keep going at 3AM in order to get the releases out quickly) decided to add his or her own special interpretation of the original artists' and producers' work.

Ortofan's picture

... the "Digital Pact" neglected to ensure that the agreement included the recipe for second harmonic sauce.

Maybe Dick Burwen and Bob Carver should collaborate on a device to add transient and background noise into digital recordings to make them sound more like analog.

X