Recommended Components Fall 2022 Edition Interconnects

Interconnects

Audioquest Dragon, XLR: $11,900/1m pair
RCA: $9500/1m pair
Uses "Solid Perfect-Surface Silver (PSS)" conductors with a dielectric comprising fluoropolymer air tubes. MF compared the balanced Dragon with his TARA Labs' "The Evolution Zero" interconnect and concluded that it was considerably more open but not brighter, faster but not leaner. (Vol.45 No.9 WWW)

AudioQuest ThunderBird XLR: $3900/1m pair
RCA: $2900/1m pair
When he substituted the balanced Thunderbird for his previous interconnect, HR wrote that his system's sound changed so dramatically that he immediately realized that what he had perceived as the Bartók's slight grain and grayness disappeared almost completely with the ThunderBird wires, "replaced by a bright, waterlike clarity and a feeling that a dam had burst and the sun had emerged from behind a winter cloud." His conclusion? "Once again, I discovered that changing 3' of wire can be the difference between boring and thrilling, plain and beautiful, hard and supple, gray and colorful." (Vol.45 No.6 WWW)

Cardas Clear Beyond: $4250/1m pair
When he replaced the budget-priced Cardas Iridium between a dCS Bartók DAC and Genelec's G Three active speakers with the flagship Clear Beyond interconnect, HR wrote that "the apparent volume of the recording venue expanded dramatically—and with that expansion came an equally dramatic sense of separation [between orchestra and choir]. Moreover, I noticed a newfound well-sortedness and a new form of dark quiet—a silence quite unlike any I'd experienced before." HR concluded that the Cardas Clear Beyond endowed the sound from the Genelec speakers "with a sublime quiet, a grand spaciousness, and seemingly infinite LSD detail." (Vol.45 No.8 WWW; also see KM's Clearaudio Reference Jubilee turntable review in Vol.45 No.7 WWW)

Linn Silver: $452/1.2m pair
Single-ended interconnect AH found made a synergistic match with the Lejonklou Entity phono preamplifier. (Vol.45 No.7 WWW)

Stealth Helios miniDIN–RCA cable: $9800/1.2m, $10,400/1.5m
The manufacturer claims the construction of this cable allows it to be safely bent at a 90° angle at the jack/wire junction. MF found that used with the AXIOM tonearm, the Helios cable produced noticeable background quiet and far more transparency than that older, "budget" cable he had been using. (Vol.45 No.9 WWW)

Analysis Plus Silver Apex Interconnects: $1219.99 (1m pair)
The Analysis Plus Silver Apex uses as its conductor an oxygen-free copper "stabilizing strand" covered with pure silver, in an arrangement the manufacturer describes, somewhat elliptically (haw) as "a hollow oval cable inside a hollow oval cable inside a hollow oval cable," said to be double shielded and thus quiet. And MF found it to be so: In his words, the Silver Apex is "highly recommended!" (Vol.42 No.5)

Audio Art Cable IC-3 Classic: $120/1m pair (RCAs), $140/1m pair (XLRs)
The IC-3—available with Audio Art's own gold-plated brass RCA plugs or, for $10 more, DH Labs' Ultimate XLR plugs—uses conductors of silver-coated, oxygen-free copper, a foam polyethylene dielectric, aluminum-Mylar shielding, and a PVC jacket. Compared to AudioQuest's Big Sur, the IC-3 lacked some midrange body and warmth but produced a pleasantly forward, detailed sound with an unusually wide soundstage, said SM. Sold direct with a 30-day, money-back guarantee. (Vol.37 No.2 WWW)

AudioQuest Big Sur: $129.95/1m ★
AudioQuest Golden Gate: $79.95/1m
AudioQuest Evergreen: $49.95/1m
AudioQuest Tower: $33.95/1m
AudioQuest's Bridges & Falls interconnects (of which these are the four least expensive models) put left and right channels in a single cable, thereby minimizing manufacturing costs while maximizing termination possibilities. Available terminations include RCA-to-RCA, mini-to-RCA, mini-to-mini, DIN-to-DIN, RCA-to-DIN, iPod-to-mini, or iPod-to-RCA, making these interconnects ideal for desktop and portable applications. The Tower and Evergreen use AQ's solid Long-Grain Copper (LGC) conductors. Golden Gate uses higher purity Perfect-Surface Copper (PSC) conductors. Big Sur uses even-higher-purity Perfect-Surface+ Copper (PSC+) conductors, and upgrades the other models' gold-plated RCA plugs to gold-plated plugs of pure purple copper. All four models are insulated with foamed polyethylene, and are attractive, well made, and very flexible. Moving up the line, SM heard improvements in image focus, tone color, drama, and overall clarity and extension. "If you're in the market for truly affordable, truly high-quality interconnects, I can think of no better place to start than AudioQuest," he concluded. SM used it between his laptop and PSB Alpha PS1 desktop speakers. Compared with the stock PS1 cable, the AQ produced a larger, more present overall sound, with deeper silences, longer decays, cleaner highs, more realistic bass, and richer tone color. "Suddenly, I had real high-fidelity sound coming from my laptop," SM enthused. (Vol.36 Nos.7, 8, Evergreen; Vol.36 No.10 WWW)

AudioQuest Earth: $1095/0.5m pair
KR, who hates wrestling with stiff cables even more than Rick Grimes hates wrestling with stiffs, has welcomed into his home a set of AudioQuest's Earth balanced interconnects, terminated with XLR plugs and featuring AQ's 72V Dielectric Bias System (DBS). Cable conductors are solid, perfect-surface copper, while the plugs are high-purity red copper with hanging-silver plating. KR's only disappointment: AQ's omission of a latching feature from the "otherwise impressively designed" XLRs. (Vol.38 No.9 WWW)

Cardas Audio Clear Rev.1: $2020/1m pair, balanced; $1840/1m pair, unbalanced
Rev.1 applies to both Cardas's Clear balanced and single-ended interconnects; JM tested the balanced version, which incorporates Cardas's heavy, gold-plated CG XLR plugs. With the Rev.1 in his system, JM gained significant measures of detail and transparency. (Vol.36 No.12 WWW)

Fono-Acustica Virtuoso: $22,100/1.5m pair
The conductors are an alloy of silver and gold (shades of Burl Ives!), the styling is Spanish Cowboy Baroque, and the price is enough to buy a brand-new Volkswagen Golf and a couple of Brooks Brothers suits. What does that add up to? According to MF, when substituted for his reference TARA Zero Evolution interconnect, the Fono Acustica made for "more graceful, almost cautious, romantic, but somehow still precise and well-detailed attacks, and long, long sustains." On switching back to the TARA, did Mikey miss the Fono Acustica? "Yes—but you can't have everything!" (Vol.39 No.3)

Kimber Kable Hero: $380/1m pair with WBT-0114
The "strong, silent type" when it comes to cables, says the inestimable JM. "And reasonably priced, into the bargain." (NR, but see "The Fifth Element" in Vol.33 No.6 WWW)

Kimber Kable PBJ: $148/1m pair, as reviewed
Originally released in the late 1980s, PBJ is a minimalist design comprising three high-quality, multistrand wires in individual Teflon jackets, braided together and terminated with Kimber's Ultraplate connectors. With the PBJs in his system, SM heard greater clarity, detail, depth, and presence. Compared to AudioQuest's Sidewinder, the PBJ lacked body and warmth but was more muscular, insistent, and precise, said SM. (Vol.35 No.6 WWW)

Kimber Kable Tonik: $108/1m pair
Kimber's most affordable interconnect uses three stranded copper wires neatly braided in a noise-canceling pattern. Though they lacked the resolution of much more expensive interconnects, the Toniks "offered clarity without brightness, and reasonably good amounts of color, texture, and touch. For $80, that was A-okay with me," said AD. Price includes Kimber's Ultratike connectors. (Vol.34 No.11 WWW)

Kubala-Sosna Anticipation: $500/m pair; $180/additional meter
Like the K-S speaker cables (see "Loudspeaker Cables"), the K-S interconnects are based on a low characteristic impedance and solid construction. The results are uncolored sound and extremely low noise pickup. (Vol.29 No.7 WWW)

Kubala-Sosna Elation Interconnect: $7000/pair first meter, $1500/each additional meter
Expensive but superbly transparent interconnect that JA found worked synergistically with YG's Sonja 1.3 speakers. (NR)

Luna Red: $2400/1m pair
See Power-Related Accessories.

Nordost Valhalla 2 Interconnect: $9199.99/1m pair
Characterized by the inclusion of Nordost's Dual-Mono-Filament spacing between conductor and dielectric, as well as of Nordost's new Holo:Plug connectors, the analog interconnects, speaker cables, phono cables, and power cords in the company's Valhalla 2 Reference series impressed BD, whose system had been wired with Nordost's original Valhalla-series cables. With the new cables in place, BD heard gains in a number of areas—especially improved transparency and resolution, greater clarity in the reproduction of spatial information, and greater timbral warmth and richness—compared with his ca-2001 Valhallas. BD added that, of all the cable products in the new Valhalla 2 Reference series, "it was the 1m interconnect with RCAs ($7599.99) that had the greatest effect on the sound of my system." (Vol.39 No.7 WWW)

Pure Silver Connection (PSC) PST 8: $1500/1m pair
Balanced interconnects featuring solid, silver-plated 6N copper and round conductors. LG reported that they reduced system hum problems and were "highly recommended!" Price is for both balanced and unbalanced interconnects. (NR)

Raal-requisite SR728 Silver Headphone Cable: $1050
HR found that this cable always played "bigger, denser, and more colorfully" than the stock copper cables supplied with RAAL's SR1a headset. The SR728 Silver Headphone Cable "is a necessity—not an accessory," he wrote. "A necessory." (Vol.44 No.10 WWW)

RSX Beyond phono cable: $3150/1m pair
Fully shielded, double-grounded, paired cable with "long crystal, ultra-pure Laboratory Grade copper," "Teflon variant-plus-air dielectric," and ultralow-mass terminations said to minimize self-inductance. MF tried the Beyond with a Kuzma 4Point tonearm and his CH Precision P1 current-mode phono preamp. To his surprise, he found the result louder than with the standard Kuzma cable—it measured louder, too—due to the RSX cable's very low impedance. Once he'd matched levels, he still heard a big difference: While instrumental timbres remained the same, "the sound was more open. The reverb behind the instruments was presented in greater relief, and the soundstage widened, with more air." (Vol.45 No.1 WWW)

Stealth Sakra V16 interconnect: $12,000/1m, $7,600 each additional meter
Balanced version: $16,000/1m pair, $9,500 each additional meter
Lightweight, very flexible, and finished in an outer jacket of near-opalescent white, the Sakra interconnect is built into a hermetically sealed, helium-filled tube and terminated with proprietary solid-silver connectors. The overall sound was open and clean, with lightning-fast attacks, generous sustains, and long decays. Compared to the TARA Labs Zero, the Sakra had a bit more midrange body and texture but lacked some air and speed, felt Mikey. (Vol.34 No.6)

TARA Labs Air Evolution interconnect: $1995 1m; each add'tl meter is $200
TARA Labs Air Evolution w/Evo Ground Station: $2695 each add'tl meter is $250
A slightly less expensive alternative to TARA's Zero Evolution balanced interconnect, the Air Evolution also uses rectangular-core copper conductors for both its positive and negative legs. Its shield is floated with respect to the signal conductors, but is terminated at the source end with mini-banana plugs that can be connected to TARA's optional Evo Ground Station, designed to shunt shield noise to ground. Although MF observed that the Air Evolutions weren't "quite as resolved on top" as the costlier Zero Evolution, he thought the two models were "close." (Vol.40 No.1 WWW)

TARA Labs Zero Evolution w/HFX Ground Station: $20,995/1m, each add'tl meter is $2300
The Zero Evolution is an all-new, physically flexible, easier to manage air-dielectric interconnect than the original Zero with non-insulated square solid-core conductors. Because neither end of The Zero Evolution's shield is attached to ground, TARA employs the Floating Ground Station, a heavy, black box containing Ceralex, a combination of ceramic materials and metallic compounds that absorbs RFI and EMI. Switching from the original Zero to the new Evolution Zero, MF's system benefited yet further from an enormous addition of lushness, texture, and warmth, along with major extensions of air, detail, and transparency. Due to The Evolution Zero's ultrawide bandwidth, some outside transient noise can leak into the system when nearby appliances are activated. But—"I've heard nothing like it," he declares, adding "a genuine breakthrough, though hideously expensive. The TARA Labs Evolution Zero had a fast, clean, open overall sound, with airy highs and tight bass. The Evolution upgrade adds the rich, textured midrange of the Stealth Sakra, while continuing to produce faster attacks, longer sustains, and deeper decays, said MF." (Vol.29 No.12, Zero; Vol.34 No.6 WWW, Zero Gold; Vol.36 No.11, Zero Evolution)

TARA Labs Zero GX DIN-to-RCA tonearm cable: $3800/1m, each additional meter $600
Though it was "somewhat bereft of physicality," the Zero GX's accentuated sibilants and precise attack made it "a good choice for detail devotees," said MF. (Vol.32 No.7)

Tellurium Q Black II XLR: $450/1m pair
A new company based in Somerset, UK, Tellurium Q is a cable specialist offering three lines of products, with Black squarely in the middle. JM responded well to a pair of Black balanced interconnects, which he found "on the slightly warm or musical side of neutral," and praised for sounding "quieter and far less closed-in at the top" than his comparatively plebian Canare interconnects. Extra points for emphasizing engineering over fancy packaging. According to JM, this entry-level-premium cable line is "well worth exploring." Black updated to Black II, at a lower price. (Vol.38 No.4 WWW)

Wireworld Platinum Eclipse 8 Interconnect: $3600/1m pair
Though it wasn't as transparent as the TARA Labs Zero, when used with the Constellation Centaur Mono monoblock amplifiers, the Eclipse 7 "produced a much better overall picture in terms of tonality, texture, and transients," said Mikey. (Vol.36 No.11)

COMMENTS
Auditor's picture

The text under the J. Sikora Initial is the same as under the J. Sikora Reference, which is obviously a mistake.

John Atkinson's picture
Auditor wrote:
The text under the J. Sikora Initial is the same as under the J. Sikora Reference, which is obviously a mistake.

Fixed. Thank you.

John Atkinson
Technical Editor, Stereophile

lesmarshall's picture

I was very surprised to read that the Benchmark DAC 3 is no longer a Recommended Component . In the earlier 2022 edition of Recommend Components , it was an A+ component . Your stated reason for the deletion was because it was not auditioned in a long while . Well why not audition it then ? Also, why is an audition necessary ? It measured as one of the best DACs ever . Why would its measurements change simply because you have not auditioned it recently ? I understand its your policy , but it seems rather unfair to Benchmark that you no longer recommend it for that reason . I believe a much fairer policy would be that a highly rated component should only fall off the recommended list if it is auditioned periodically and you determine that its current level of recommendation is no longer justified based on the factors that you use to include a component of the recommended list .

JRT's picture

Les, toward some light hearted amusement, consider a reductio ad absurdum.

The quoted material below was excerpted from the first version (published 01 May 1963) of Stereophile's recommended components, just the A,B,C rated amplifiers and preamplifiers:

Quote:

Preamplifier-Control Units
A: Marantz 7, McIntosh C-20
B, C: Dynaco PAS-2

Power Amplifiers
A: Marantz 8B, McIntosh MC-60 (footnote 5), Marantz 9A (footnote 5)
B, C: Dynaco Stereo 70

Footnote 5: mono amplifier.

Reductio ad Absurdum... Should the old gear listed above continue as currently recommended gear, or is it best left in its original context in the circa 1963 article? ...and why or why not? ...and is it a much too different set of cases for comparison? ...why? Would that old gear be good fodder for a listing of recommended vintage gear, and is that good subject matter for the current Stereophile readership? These are mostly rhetorical questions, but not all.

JRT's picture

Would you also include the essentially similar PAS-3, and then also the PAS-3X with updated tone controls, and then maybe also Frank van Alstine's improved Super PAS Three, etc.? The original short-list can grow large.

https://www.stereophile.com/content/recommended-components-1-0

https://www.stereophile.com/tubepreamps/1088vana/index.html

xtcfan80's picture

lesmarshall...a few years ago I believe it was the late Art Dudley who explained why gear drops off the RC list. Do a search and read it, explained in classic Art Dudley fashion. Cliffs Notes Version: GET OVER IT! A piece dropping off the list does not invalidate any past purchasing decision, only the ego of the complainer...

Soundguy123's picture

“I was very surprised to read that the Benchmark DAC 3 is no longer a Recommended Component . In the earlier 2022 edition of Recommend Components , it was an A+ component.”


I agree with you Les. Benchmark products are indeed remarkable! They belong on any A+ list. Benchmark LA4 Preamplifier and AHB2 Power amplifier are currently on Stereophile’s recommended list. So Benchmark is probably recommended in more categories than anyone else!

georgehifi's picture

It would be nice if the "title" of the piece recommended was clickable, so one could easily then read the full review of all these thousands of "recommended components" instead of searching like a ???

Just a thought??

Cheers George

liquidsun's picture

I must say I'm surprised to see Perlistens into Restricted Extreme LF category as I thought they were full range speakers.

Kal Rubinson's picture

For most, they will be full range but, as you can see from JA's Fig. 4, the FR is rolling off smoothly below 100HZ such that it will easily mate with a complementary subwoofer. I believe that was Perlisten's intent. That said, unless you are assessing the sound of low, low organ pedal tones, explosions or thunder, the bass from the s7t is clean, powerful and musically satisfying.

Robin Landseadel's picture

There's a lot of Dance Pop/Techno music that gives the lowest octave a workout. Managed to blow out the small bass driver from a Paradigm bookshelf speaker with a Sarah McLaughlan track---"I Love You" from the album "Surfacing"---a quiet ballad with a synth bottom without overtones, so there's pure, deep bass. Another good example would be the work of Bill Laswell, a producer/bass player.

Kal Rubinson's picture

OK but how is this relevant? On the one hand, I am not surprised that one can blow out the small bass driver in a bookshelf speaker. On the other, I doubt if it would do that to the Perlisten.

Robin Landseadel's picture

Blowing out the driver of a Paradigm Atom might not be meaningful save that I blew it out with a track that is low in level and undynamic. More to the point, it sounds like the speakers in question could use a sub. Of course, you pointed out that the speakers in question are designed to integrate well with subs. My Infinity 250 speakers, small floor-standing speakers, also requires a sub for deep bass.

What is meaningful is that there is more to the bottom octave than organ pedals and explosions. Lots of modern productions take advantage of digital recording/playback's ability to record/reproduce the lowest octaves of sound.

Kal Rubinson's picture

Yes, there is a lot more to the bottom end than I cared to mention but the distinction between the small Paradigm Atom and the s7t is that the former needs a sub (or a LP filter) merely to survive wide-band signals while the latter does not.

Did you read my comments about the Garage Door test? I doubt that either your Paradigm or your Infinity could compete with the Perlisten, with or without a sub.

Robin Landseadel's picture

Doubtless. My point was more about program material and really deep bass. In any case, my Infinity Primus 250s are aided by my Sonance Son of Sub. As the system is in a small room, it's probably as much bass as the room can take.

Anton's picture

I like to hit this issue and pretend all my Hi Fi gear is gone and I have to start over with my budget and this list.

Glotz's picture

Droooooool.. and I'm done FOREVER.

Soulution, MBL... heaven.

KEFLS50W's picture

It will be interesting to see if Stereophile catches up to the focus on active, integrated designs. The relevance of separates seems to be waning in comparison to these sexy and modern designs (many of which are good value to boot) from KEF, B&W, Q Acoustic, ATC, Dali, and others. LS50WII for example gives me access to high quality, high current class a/b amplification I would not have been able to afford with separates. On another note, why are REL subs not listed - they would floor the competition listed in terms of sonics and build quality. Sorry but SVS is a home theater product and KEF KC62 is for kids.

Apollo's picture

Focusing on the Class A Solid-state Two-channel Amplifiers for sake of my question, I am struggling with the broad price range, from about $1K at the low end of the range, to about $100K at the high end of the range.

At its simplest, my question is: why spend $100K for an amp, when one can get a similarly rated amp, and therefore a similarly good amp, for $1K?

I am asking without sarcasm, criticism, or prejudice. I want the best SQ. And I would rather spend the $ difference on something else.

What I find fascinating, is that more and more reviews across publications/websites conclude with the statement to the effect: "unless you want to spend more money, this piece of gear is perfect and all one needs".

So how can the $100K audio OEMs survive when similarly rated gears can be had for 100x less? What am I missing? Why spend $100K for an amp, when one can get a similarly rated amp for $1K?

xtcfan80's picture

"I am struggling" ...and maybe hifi isn't for you if you don't understand why some Class A gear costs 1K and some 100K...Be Happy and Listen!!!

Audiolad's picture

It's interesting that this product is becoming disruptive to the streaming industry. Besides saving the buyer money, their engineering staff literally are adding updates and upgrades every month, and they schedule them in advance. $99

claud's picture

I'm looking to audition the Revel 226be and 228be and comparable Dali floor standing speakers for the front pair of a 5.1 system. Since the First Watt J2 amp was mentioned here, how might it sound driving the tweets and mids of these speakers vs. say a some of the best 300B SET amps? I suspect that the 300B SETs would badly trounce this otherwise respectable Class A amp. But has anyone actually tried this? Also, would the J2's warm up take longer than the 300B SETs to sound its best? Please share thoughts, experiences.

BillK's picture

You mention "VPI HW-40 Anniversary Edition, discontinued" but you also dropped the VPI Avenger Reference since Spring 2022 but don't mention why.

X