Recommended Components 2022 Edition FM Tuners & Antennae

FM Tuners & Antennae A

DaySequerra FM Reference Signature Modification: $3800 (+ cost of tuner) ★
David Day's Signature Mod effectively addresses this ultimate FM tuner's cathode-ray tube's tendency to burn out. Switching circuitry has been added to allow the CRT to turn off when not needed. The Signature Mod also replaces the tuner's incandescent bulb with longer-lasting LEDs, and uses hand-matched, low-group-delay filters for lower distortion and better channel separation. LG noted punchy, quick bass response, a deeper soundstage, and a more transparent midrange. "The new CRT's greater range of brightness and longer life expectancy makes the Signature Modification essential for owners of the DaySequerra FM tuner." The FMR25 upgrade replaces older models' cathode-ray tube display circuitry with a much brighter and more reliable thin-film-transistor liquid-crystal display, and adds a post-FM demodulation filter to remove noise at 99kHz and above. "A run-don't-walk upgrade for owners of FM References," decided LG. Price is for upgrade only; does not include cost of tuner. (Vol.12 No.6, Vol.14 No.12, Vol.21 No.6, FM Reference; Vol.29 No.9, Signature Modification; Vol.36 No.11 25th Anniversary Edition WWW)

D

Tivoli Audio Model One BT: $199 ★
"The Tivoli Model One is a radio stripped to its essentials: no stereo, no station memories, no remote control, no tone controls," said ST. This design from the late Henry Kloss didn't like being played very loud, ST discovered, but was "plenty loud for a typical office, and, ultimately, loud enough for me." He heard "a richness, a warmth, a generosity of tone, and a clarity that made for enjoyable listening. I was never fatigued." "A bit boomy," says JA, "but pleasantly so." AD connected the Model One's record-out jack to his preamp inputs, then muted its speaker. Matching the Tivoli with a RadioShack 15-2163 FM antenna, he found that "the combination has been nothing short of wonderful in my system: a flexible, great-sounding monophonic source for a combined price of only $124." (Vol.24 No.3, Vol.27 No.7 WWW)

COMMENTS
donnrut's picture

Not a single disc player reviewed under $4 thou??? Come on. I don't drive a Porsche Taycan or a Lambo. I have a $7 thou turntable rig assembled over several years of upgrades. My SACD player died 5 years ago, and now, I am in the market for $500 or $1000 disc player. I'll stream eventually but I have listened to my CDs, tossed out the bad ones and have maybe 200 that are well engineered/mastered, about 50 SACDs. I want S'phile to help me get a decent player. There are maybe half a dozen newish models.

johnnythunder1's picture

been doing a little research. The Hegel (discontinued) was 5k. The Bryston is 3+k. Ive had my eye on a Rotel CD 11 Tribute. It's like $600 and gets very good reviews. https://www.rotel.com/product/cd11-tribute

AndyT2050's picture

I have a Rega Research Apollo Cd Player. Beautiful sound, nice design in my opinion. Not too expensive

moinau's picture

Nothing in the 500 to 1000$ range SACD player, although this Arcam might interest you.
Arcam CDS50

Ulfilas's picture

There is one recommended in the integrated amps category:

https://www.stereophile.com/content/quad-artera-solus-integrated-amplifiercd-player

I have one myself, and grateful for the recommendation I am.

rlo's picture

Can you please bring back the links on the mobile page that let you jump to the relevant recommended component page? This has been missing for the last few. It’s quite annoying to have to switch to desktop theme to be able to go directly to the page I want (e.g. loudspeakers, amplifiers etc)

Jonti's picture

I've had mine for about 18 months and still have a sense of quiet awe every time I listen to/through it.

Tube-rolling can also yield excellent results. I have switched to NOS Mullards, which work a treat by (to my EAR) thickening the syrup and stirring the pot in such a way that the ends and edges of trailing sounds glisten, firing off from a weightier centre. (The stock EAR-stamped tubes were fine, just different: lighter-sounding, I think; I assume Tim would have approved the use of NOS Mullards given his views on the quality of many new tubes doing the rounds.)

Just for the benefit of any readers thinking about rolling those tubes, here's some extra instruction I received from an engineer at EAR Yoshino on how to go about it:

"Remove the top cover by removing four screws on the bottom of the unit. The jumper plug is located on the left side of smaller power supply circuit board labeled ECC83 and 13D16. The default position for the jumper is 13D16 with standard 13D16 valves fitted. If ECC83 valves are fitted then move the jumper one position to the right in the ECC83. position."

And finally, on the subject of MM/MC carts, I think it's fair to say (as correctly reflected in its rating here) that the Phono Box gives a solid platform to MC carts but really excels with MM/MIs. Try it with a London Decca!

[Edited version of post on Herb's original review]

hesson11's picture

The comments under the heading "Harbeth P3ESR XD" seem to imply that the XD version is identical to the 40th Anniversary edition, which Herb reviewed. Is that, in fact, the indisputable truth? I don't believe I've ever seen any official word that this is, in fact, the case.

X