Solid State Power Amp Reviews

Musical Fidelity AMS100 power amplifier Specifications

Sidebar 1: Specifications

Description: Solid-state, bridged, two-channel power amplifier with class-A output stage and switchable balanced and unbalanced inputs. Rated output: 100Wpc into 8 ohms (20dBW), 200W into 4 ohms (20dBW). Peak output voltage: 80V p–p. Peak output current: 200A p–p. Frequency response: 10Hz–40kHz, +0/–0.4dB. Input sensitivity: 650mV for 100W into 8 ohms. Input impedance: 50k ohms, balanced and unbalanced. Damping factor: 200, equivalent to an output impedance of 0.04 ohm. THD+noise: <0.005% unweighted. Signal/noise: >110dB, A-weighted, ref. maximum power. Power consumption: 1200W maximum, 14W idle.
Dimensions: 19" (483mm) W by 12.75" (325mm) H by 34.67" (880mm) D (inc. terminals). Weight: 220 lbs (100kg) net, 334 lbs (152kg) shipping.
Finish: Black with dark gray front-panel highlights.
Serial Number Of Unit Reviewed: AMG0003.
Price: $19,999. Approximate number of dealers: 15. Warranty: 5 years P&L.
Manufacturer: Musical Fidelity Ltd., 15-17 Fulton Road, Wembley, Middlesex HA9 0TF, England, UK. Tel: (44) (0)181-900-2866. Fax: (44) (0)181-900-2983. Web: www.musicalfidelity.com. US distributor: Tempo Distribution LLC, PO Box 541443, Waltham, MA 02454-1443. Tel: (617) 314-9227. Fax: (617) 336-3486. Web: tempohighfidelity.com.

COMPANY INFO
Musical Fidelity Ltd.
US distributor: Tempo Distribution LLC
PO Box 541443
Waltham, MA 02454-1443
(617) 314-9227
tempohighfidelity.com
ARTICLE CONTENTS

COMMENTS
soulful.terrain's picture
Submitted by soulful.terrain on September 3, 2011 - 3:19pm

Holy smokes! that is a beautiful beast. I'll take it!

John Atkinson's picture
Submitted by John Atkinson on September 3, 2011 - 5:09pm

Quote:
I'll take it!

You won't be able to lift it :-)

John Atkinson

Editor, Stereophile

soulful.terrain's picture
Submitted by soulful.terrain on September 4, 2011 - 11:33am

 

No doubt John. Geez, where did they pack in all that weight? Couldn't be the chassis alone. Or, could it?

Nevertheless, I can envision hefting that behemoth up the front steps... with the Ambulance arriving shortly thereafter. :-)

 

Mark

John Atkinson's picture
Submitted by John Atkinson on September 5, 2011 - 1:43pm

Quote:
Geez, where did they pack in all that weight? Couldn't be the chassis alone. Or, could it?

4 power transformers + 4 bifilar-wound chokes =  "Heavy Iron"

But all that for 100Wpc = equally heavy silliness!

But it did sound gorgeous.

John Atkinson

Editor, Stereophile

soulful.terrain's picture
Submitted by soulful.terrain on September 6, 2011 - 7:12am

 

No wonder it's so heavy.

John, Even though I have been involved in this hobby for quite some time, I still consider myself a novice when it comes to the more intricate aspects of Hi-Rez audio.

How come some of the best sounding amps are the 100 w/ch. amps as opposed to the mega watters in the 300-600 w/ch. range?

Am I wasting my time just going for the really powerful amplifiers?

Your opinion matters tremendously to me.

Thank you,

Mark

volvic's picture
Submitted by volvic on September 6, 2011 - 6:58am

You can turn off your baseboard heaters in the winter and rely on this baby to keep you warm.  Like you mentioned in the article I would imagine summer listening might be kept to a minimum.  It is beautiful to look at though and no doubt even more beautiful to listen to.  Doubt I will ever hear it at a hi-fi show though due to its excessive weight.  

Soothsayerman's picture
Submitted by Soothsayerman on September 6, 2011 - 8:56am

This silly product does prove the corollary true...

If you want to make a small fortune in high end, start with a very large fortune.

billyb's picture
Submitted by billyb on September 9, 2011 - 11:02pm

Hello,

I can't help but wonder why there were no other amplifiers in the same classification mentioned in this review. In fact, the premise of the article and Antony Michaelson seem to imply there are not other class A, 100 watt or more, solid state amps on the market.

     Am i missing something obvious here? Surely companies such as Sugden, Krell, Plinius, and Pass Labs all have current offerings similar in specification.  Wouldn't it be useful to compare something to this amp? If I were looking to buy it I would certaintly be doing just that.

John Atkinson's picture
Submitted by John Atkinson on September 18, 2011 - 2:07pm

Quote:
I can't help but wonder why there were no other amplifiers in the same classification mentioned in this review

That is a fair point. However, comparisons can only legitimately be done with products with which the reviewer is intimately familiar. In the case of the AMS-100, this was the case with the Classe and MBL monoblocks. Though both are more powerful than the Musical Fidelity, they do bracket its price.

John Atkinson

Editor, Stereophile

serdarsenturk's picture
Submitted by serdarsenturk on November 4, 2012 - 7:54am

I had bought AMS50 and primo preamplifier one month ago.  That was a demo unit that I had bought from the distributor. I had installed the system this week. Main complaint for me is the audible noise coming from the transformer of the AMS50. At night when there is silence you can hear the hum coming from the transformer. Also no input noise on the speakers when AMS primo is fully on is at audible levels.  I think that above issues are negative points for an amplifier, but these have not been pointed out in the review. Generally when read the rewieves I never do read any comment about the above issues. IMHO these two issues are important and must be mentioned.

regards,

darkmatter's picture
Submitted by darkmatter on September 28, 2021 - 10:38am

A question for JA

In your view John, could the AMS 100 drive a 1 ohm load such as the Apogee Scintilla?
A review published in the UK magazine HiFi News /RR March 2011 rated it at 660 watts into a 1 ohm load, but this was under dynamic conditions with 28 amps of clean (<1% THD) current over 10 msec.

I will have to dig out old reviews / measurements of the KSA50 / 100 to see what their current delivery was and to see how the KSA100 compares to the AMS 100 in this regard, and thus its suitability as a potential Scintilla driver?

Thanks

DM

X