Luxman DA-06 D/A processor Specifications

Sidebar 1: Specifications

Description: Single-box digital-to-analog converter. Formats supported: all PCM and DSD codecs (AIFF, WAV, DSF, etc.). S/PDIF, AES-3, and optical sampling rates supported: 32, 44.1, 48, 88.2, 96, 176.4, 192kHz. USB sampling rates supported: the preceding, plus 352.8kHz, 382kHz, 2.8224MHz (1-bit), 5.6448MHz (1-bit). Digital inputs: USB Type B, S/PDIF (RCA), AES-3 (XLR), optical (TosLink). Analog outputs: single-ended (RCA), balanced (XLR). Maximum output voltage: 2.5V. Output impedance: 300 ohms single-ended, 600 ohms balanced. Signal/noise: 124dB. Channel separation: 120dB. Total harmonic distortion: 0.0005%.
Dimensions: 17.2" (440mm) W by 3.6" (92mm) H by 15.6" (400mm) D. Weight: 24 lbs (11kg).
Serial number of unit reviewed: M31100054.
Price: $4990. Approximate number of dealers: 30.
Manufacturer: Luxman Corporation, 1-3-1 Shinyokohama Kouhoku Ku, Yokohama, Japan. Web: www.luxman.co.jp. US distributor: On a Higher Note, PO Box 698, San Juan Capistrano, CA 92765. Tel: (949) 544-1990. Fax: (949) 612-0201. Web: www.onahighernote.com.

COMPANY INFO
Luxman Corporation
US distributor: On a Higher Note
PO Box 698
San Juan Capistrano, CA 92765
(949) 544-1990
ARTICLE CONTENTS

COMMENTS
maheshkc's picture

Hi
Great review as always
just one question, you say xlr has (pin2+) but manuel says normal(pin2 -)
which one is correct?

Thank you
sincerely
Mahesh kc

John Atkinson's picture
maheshkc wrote:
Great review as always

Thank you.

maheshkc wrote:
just one question, you say xlr has (pin2+) but manuel says normal(pin2-) which one is correct?

My measurements clearly indicated that the XLR jacks on our sample were wired with pin 2 hot, the DAC being non-inverting when connected to the Audio Precision, which has pin 2 hot.

John Atkinson
Editor, Stereophile

maheshkc's picture

Hi Thank you for your kind reply.
i tried to contact Luxman but no answer.....
sincerely
Mahesh kc

X