Klipsch Reference Premiere RP-600M loudspeaker Specifications

Sidebar 1: Specifications

Description: Two-way, rear-ported, stand-mounted loudspeaker. Drive-units: 1" (25mm) titanium-dome tweeter with hybrid cross-section Tractrix horn; 6.5" (165mm) Cerametallic-cone woofer. Crossover frequency: 1.8kHz. Frequency response: 45Hz–25kHz, ±3dB. Sensitivity: 96dB/W/m. Impedance: 8 ohms. Power handling: 100W continuous, 400W peak.
Dimensions: 15.7" (400mm) H by 8" (200mm) W by 11.9" (300mm) D. Weight: 16 lb (7.3kg).
Finishes: Black Ash (vinyl), Walnut, Piano Black Gloss.
Serial numbers of units reviewed: 106580418290330A & B.
Price: $549/pair for Ebony and Walnut (vinyl), $649/pair for Piano Black Gloss finishes. Approximate number of dealers: Not disclosed. Warranty: 5 years.
Manufacturer: Klipsch Group, 3502 Woodview Trace, Suite 200, Indianapolis, IN 46268. Tel: (800) 544-1482, (317) 860-8100. Fax: (317) 860-9170. Web: www.klipsch.com.

COMPANY INFO
Klipsch Group
3502 Woodview Trace, Suite 200
Indianapolis, IN 46268
(800) 544-1482
ARTICLE CONTENTS

COMMENTS
atomb's picture

...I've got one of them too.

Marvelousmarkie's picture

A very odd review of an unpleasant speaker.

liquidsun's picture

Did you spend your money on another speaker and now you jealous?

Ortofan's picture

... does JA1 give any consideration to using the same (type) of amplifier(s) as used by the reviewer that made the sonic assessment?
It would be interesting to see if there was a significant difference in frequency response when the speaker was driven by the tube-type EleKit TU-8600R as compared to when it was driven by the solid-state First Watt SIT-3.

d700's picture

The review tracks to my own listening, almost went with RP-600M but wanted to try the LS50 as my last listening room set were Klipsch. I really enjoy the LS50 too. When I first tried Klipsch's bookshelves way back when (62i or something), the seller told me they'd be 12db louder at my seating position given same amp level. I did an A/B with sound pressure meter and he was off by 1db. Its crazy how little power Klipsch's need. I'm thinking about a PowerNode 2i and RP-600M for the bedroom, probably be all one needs in a small room.

Bogolu Haranath's picture

Match these loudspeakers with either Rogue Audio Cronus Magnum III ($3,000) tube integrated or, Parasound HINT-6 ($3,000) transistor integrated :-) .........

tonykaz's picture

I'm wondering if these loudspeakers make Herb's superb electronics sound
1) superb,
2) better than they usually sound
3) less than they usually sound.

I think I'm reading Mr. HR is say'n their performance is commensurate with his system making them an Audiophile Bargain.

These things are Chinese, dammit.

I called the Klipsch Factory in Hope, they answered the Phone !

Can I call the Klipsch Factory in Mainland China ?

There are 2 Klipsch Factories, one makes throwaway loudspeakers , one makes Legacy Hardwood Loudspeakers.

The Klipsch technology is Scaleable.

Now, can we finally have Wilson Loudspeakers made in China ( for 10% of their USA price ? ) It will only take a little reverse engineereing and Poof, you have it : Cardboard Wilsons ! ( engineered material Wilsons )

Tony in Michigan

ps. Oh Hell, while we're at it, lets make all our pricy gear in China. dcs China gear, Audio Research China, VPI Turntables from China.

and

lets sell China all our dirty Coal to burn

brenro's picture

Two words in this article sum up my usual impression of Klipsch, "glared" and "hardness".

mns3dhm's picture

As someone who's slagged Stereophile for constantly reviewing products that are well beyond the means of a typical household, it's great to see a very positive review of a speaker that the average household can certainly afford. Bravo! I encourage you to devote page count to one (or more) products like this in each issue. I expect that some audio snobs and Klipsch haters will make sure to tell you how wrong you are in the comments which, to my way of thinking, is a clear indication you're providing stimulus EXACTLY where its needed most.

scottsol's picture

Except all we know is that the reviewer liked them when used with equipment the typical buyer would never come close to using with these speakers.

scottsol's picture

"What other speaker manufacturer has continuously manufactured the same flagship model for 73 years? What other speaker maker has three anechoic chambers, one engineered specifically for measuring the compression drivers of horns? What other speaker maker would sell a "Reference Premiere" model for only $549/pair?"

The above has absolutely no business being in a legitimate review. It reads like the spiel of a bad salesman. "Reference Premier" indeed, it is just as easy to put that moniker on a product as "The best we could do for the money". Are we to start evaluating speakers by how many anechoic chambers the manufacturer has.

If this is an example of the kind of blatant favoritism JA is now willing to accept, I am no longer saddened by his departure as Editor in Chief.

Marvelousmarkie's picture

https://www.audiosciencereview.com/forum/index.php?threads/klipsch-rp-600m-speaker-review.12138/

Edit: Oops, sorry, someone else posted this. In any case, it’s an honest, unbiased review, and consistent with what most discerning listeners will experience with these loudspeakers.

Bodhidan's picture

Audio Science Reviews shows you what a sound measuring robot would experience from a speaker. I think it's neat info but even his subjective reviews are from him listing to a single speaker. The last thing I think about when listing to music is raw data.

DougM's picture

I'm not a fan of these speakers, as I find them too recessed in the mids and too hot on top. However, that being said, ASR's measurements show a big 5db dip between 1 and 3khz, while John's show a much smaller 2db dip between 1 and 2 khz. Who do you trust, a rich guy who bought a Klippel system and now thinks he's the world's premier loudspeaker expert (who's only been measuring speakers since 2020), or John, who's been doing this for decades? I know my answer.
In spite of that, I urge anyone interested in this speaker to audition the RP500M, which not only costs less, but is a much better design that is far more balanced and better sounding without the big midrange dip and overly shrill treble of the 600.

nunhgrader's picture

Really love his writings and reviews! Thank you

organics1's picture

My ears bled. From the first note. OMG!
‘’Their gonna need a good couple hundred hours to break in,’’ said the Klipschophiles.
Not in this house. So, for two years they’ve been gathering dust.
A couple others have come and gone. Real HARD room. No treatment possible right now in this shared space.
Enter the LXminis. INSTANT sweetness! Without having to break anything in…or out. Even SWMBO fell in love with them. Of course, the downside of that is now I've got to share listening time. :(
Thought about using the 600Ms for firewood, but the walls are so thin they wouldn’t even make good kindling. If you own them don't EVER look inside!

X