Columns Retired Columns & Blogs |
Like a Boss: The Philips Fidelio X2 Page 2
Ha!
Yes, after all that talk about how difficult it is to interpret measurements, that's exactly where I'm going to start my discussion of my listening experience.
The raw frequency response plots above compare the X1 (green and blue) to the X2 (red and orange). Plots are aligned at 800Hz. The first thing to notice is that the X1 is slightly more "U"-shaped in response than the X2. Below 800Hz the X2 plot shows essentially a flat response to 180Hz before beginning to rise about 5dB to peak at the primary driver resonance at about 60Hz. Below 60Hz the bass response falls of at about 12dB/octave which is basically unavoidable with an open headphone design. In contrast, the X1 rises slowly with decreasing frequency below 800Hz to peak at 60Hz at close to 10dB higher.
To my ears this is a very important change. When reviewing the X1 I considered it an open headphone for bassheads because of this ever increasing response and significant bass elevation. The X1 sounds warmer and thicker in the low-mids and bass than the X2. I usually site the desired neutral target for bass rise as about 3-5dB below 120Hz. It seems to me the X2 gets pretty close to this, and to my ears the bass response in the X2 is entirely appropriate. By that I mean that I consider this profile as neutral, and not bass emphasized. (See Harman response curve info here, here, and here.)
The fact that this is an open headphone having the natural steep roll-off below the primary driver resonance at 60Hz does, like all open dynamic driver headphones, cause the bass response to be slightly loose sounding. I have to say though that the bass response of the X2 is excellent for an open headphone...certainly one of the best I've heard. The tonal balance to me seems so spot on that it's very easy to forgive the slight looseness.
To those who might be worried about a lack of extension I'd point out that you have to get down to about 30Hz before you cross the level of the mid-range. This is a very tasty mid-range to bass response profilea nice strong bass response with nary a scent of bloat or thickness in the low-mids, which I did perceive in the X1.
Above 1kHz both cans rise to a peak at about 3.5kHzwhich is right in line with the Harman targetbut the X1 peaks about 3dB higher than the X2. So, from 60Hz to 3.5kHz the X1 is moderately more "U" shaped, and sounds it. The upper-mids and low treble of the X1 sounds slightly withdrawn due to the bass and mid-treble emphasis relative to the X2, and vocals do sound slightly more distant on the X1 than X2. The X2 in this area sounds remarkably neutral. The balance between 60Hz and 3.5kHz is simply terrific.
And now to that dip between 5-8kHz on the X2. Let me quote myself from the sound quality section of my X1 review:
The treble with these cans has me a bit baffled. In some ways it's just a bit gritty sounding, cymbals and brushes on drums are just a tad edgier than natural. On the other hand, the imaging is quite good, and an open sense of space is apparent; these things usually require pretty good treble response.
Well, I think that reduction in the mid-treble with the X2 did do some very good things to neutralize the edgy sound I was hearing from the X1. In addition, and it's not particularly easy to see, the X2 response above 10kHz is about 5dB higher in level than the X1. It's a bit noisy up there due to all the reflections, but you can see the red and orange traces are generally above the blue and green ones. What I hear is a better sense of balance throughout the treble ranges with the X2. Cymbals seem to have the right mix of crash, clang, and shimmer, while with the X1 there a sense of artificialness when the treble ranges are out of balance.
Additionally, this particular treble response gives the X2 a much better sense of stereo imaging, delivering greater width and depth than the X1. At this point I have to bring out my one complaint with the X2: it still does seem a little gritty sounding. While the treble has terrific balance, it's not quite as refined as I'd like, but it's certainly very good for a $300 headphone.
In the 300Hz square wave response shown to the right, you can see that the X1 is somewhat less noisy subsequent to the initial edge. This would normally lead me to believe the X2 is harsher sounding than the X1, but it doesn't quite come out that way perceptually. Yes, I think both cans has a slightly gritty and bothersome treble, but the treble balance of the X2 is so much better that it seems like the grittiness is significantly less apparent.
I think what we're seeing here is the iterative process of excellent product development at work. The X2 has clearly better balance than the X1 to my earsa great step forward. I expect we'll see Philips working to keep the spectral balance spot on as they work on creating a cleaner transient response moving forward. I'll add however, it may be that methods for continued improvement may up the cost of the final product. It may very well be that the way toward better response will involve more expensive materials and methods, and the next step forward may have to be a more expensive headphone. That's fine with me, I think the X2 is an outstanding value at its price, and at this point I'd totally welcome Philips attempt at a $600 headphone.
Comparisons with the Sennheiser HD 600
Any of you who have read my HD 600 review will know I hold them in high regard. In fact, many enthusiasts believe they may be the most important headphone in the hobby. Well, I don't think the X2 is going to change thatthe HD 600 was a great headphone very early on and will forever hold an historic place in headphonedombut I do think the X2 is the first headphone in the mid-priced, open headphone class that might deliver a superior listening experience.
Bass response of the X2 is tighter and significantly more satisfying in level. Treble response is a little less grainy on the HD 600, but it doesn't seems as well balanced. Image width and depth is much better on the X2. Mid-range is about the same on both, but the overall impression of the sound is much nicer on the X2. It's almost as if everything is accentuated on the X2, the overall balance is so good it's as if you get instant access to the whole of the music.
The only good reason to purchase an HD 600 over the X2, in my opinion, is when you're pairing it with a high output impedance tube amp. The 35 Ohm impedance of the X2 just isn't going to pair well with a 100 Ohm output impedance OTL amp. The HD 600 will remain an important headphone for those applications...unless Philips comes out with a 300 Ohm X2, then all bets are off.
Summary
With their offerings over the past year or so, I think Philips has become one of the major power-houses in headphone development. And for me, the X2 may be their best effort yet. For the first time, I think I'm hearing a near perfect tonal balance in a headphoneit's as if the entirety of the music is front and center. On top of that, its open design and attention to detail delivers superb headphone imaging without giving up any dynamic excitement. I'll nit-pick a bit and say it doesn't have quite the bass extension and tight punch of the very best planar magnetic cans, and the treble can sound a bit gritty at times, but in this class and price range I think it tops the charts.
Build quality, styling, ergonomics, and comfort are all good, but I do think the headband hammock elastic is a tad tight. Unlike the X1, the X2 does have replaceable ear-padsthank you Philips! The cable impedance has dropped to acceptable levels, and the flush mounted 3.5mm TRS entry jack on the left earpiece will allow for easy upgrades to aftermarket cables, if one so chooses.
The Philips Fidelio X2 is going to hit the Wall of Fame like a boss. The only thing keeping it from knocking the HD 600 off the wall is its low 35 Ohm impedance that makes it a poor match for high output impedance tube amplifierssomething that the HD 600 does very well. But for most folks seeking a solid mid-level headphone audiophile experience, the Philips Fidelio X2 may be just the ticket. A huge thumbs-up from me!
Video
Resources
Philips home page, X2 product page is not up yet as of this writing.
A very good review on Head-Fi here, and X2 thread here.
- Log in or register to post comments