Vincent SV-737 integrated amplifier

Founded in 1995 by Uwe Bartel, Vincent Audio is owned by Sintron Distribution GmbH. Vincent launched its LS-1 preamplifier and D-150 hybrid stereo power amplifier the year the company was founded.

Vincent "offers two 'electrical concepts,'" states the Vincent website. "One side is solid state transistor products. The other is a hybrid technology featuring vacuum tubes on the input stages combined with solid state transistors in the output stage."

The Vincent Audio SV-737 integrated amplifier ($3499.95) is on the hybrid side. It has a "class-A/AB" output stage—biased to deliver 10W in class-A—said to be capable of 180Wpc into 8 ohms (10Wpc of that in class-A) or 300Wpc into 4 ohms. The SV-737 does digital, with a Burr-Brown PCM5102 DAC chip capable of PCM playback up to 24-bit/192kHz via TosLink or coaxial S/PDIF connections. Wi-Fi and Bluetooth are also included. There is no USB input.

"All [Vincent] products are designed and engineered in Germany," Frank Blöhbaum, engineering consultant to Vincent and a leading member of the design team, told me in an email. "Product manufacturing takes place in China, Germany, or a combination of the two. We have no unit which is 100% produced in Germany. Only the SA-T7, the SP-T700, and the new KHV-200 have final assembly in Germany." The SV-737 is manufactured in China.

The SV-737 is big. It weighs 47lb. Its casework is aluminum. The exterior is imposing, like a newly christened battleship. I found the matte black finish, thick faceplate, and hefty control knobs impressive, and I liked the little porthole that reveals a tube inside.

An Allgemeine Elektrizitäts-Gesellschaft tube
As black as coal, the SV-737's faceplate holds, left to right, four control knobs for treble, bass, input selection, and volume. All the knobs work smoothly and silently. A round, 2¼" display window appears at the center of the façade—a porthole, revealing a German-made, new old-stock (NOS) AEG (Allgemeine Elektrizitäts-Gesellschaft) 85A2 tube; more on that tube later.

Along the bottom edge of the front panel, below the knobs and glowing window, is a ¼" headphone jack followed by a row of fingertip-sized pushbuttons that are intermixed with LEDs. The headphone jack is said to support 'phones between 32 ohms and 600 ohms; when headphones are inserted, the loudspeakers are muted. The small buttons allow you to select between digital or analog sources; activate tone controls; or choose which set of speaker terminals is active. A "WPS" button facilitates setting up the 737 to work with your Wi-Fi network. The big button in the middle is for power.

621vinc.bac

On the back panel are the four digital inputs, the six line-level inputs, pre-out and amp-in connections (jumpered by default), a set of Record analog outputs, two sets of loudspeaker binding posts, the IEC input, a voltage selector (115/230V), and a pair of DC-trigger outputs. Top-right are mounts for the Wi-Fi and Bluetooth antennas.

The thin, brushed-black aluminum remote's controls include mute, input, and volume. It was easy to choose inputs using the remote, but I found it difficult to set just the right volume level. Another button on the remote controlled illumination of the 85A2 tube; three brightness levels are available. (Apparently, it's not tube light that's visible through the window.) The chassis's two sides are heatsinks.

Under the hood, I found a Chinese-made, "DC 5kV tested," 5.6" × 4.25" power transformer that Vincent says weighs 17lb, and I believe it. Also, prominent inside are two circuit boards that contain circuitry for the mirror-image, dual-mono output stages; five tubes including the AEG tube in the middle; an Alps volume control; capacitors from Elna, Wima, and Nichicon; and several Sanken bipolar output power transistors. Everything inside seemed well-ordered and methodically situated, down to the thick "Huaming Wire Mesh Co. Ltd." soldered silver wire affixing circuit board to speaker terminals.

The 737 preamplifier-stage array of two 6N1P and two 6N2P tubes is standard stuff, but the single AEG 85A2 tube (CV449/CV4048) peering out from the faceplate window is anything but. "It's a professional gas stabilizer tube, an integral part of the high-voltage power supply regulation for the preamplifier," Blöhbaum explained. "Allgemeine Elektrizitäts-Gesellschaft [AEG] was an icon of the German electronics industry, founded 1883." AEG developed "the world's first high-quality tape recorder in the 1930s" (footnote 1). The 85A2 "has tight tolerances and was used for voltage stabilization in professional equipment. For audio devices, it was never used up to now because it was too expensive."

621vinc.bac2

Considerable thought seems to have gone into lowering the noise floor of the SV-737. "The transformer has extra isolation between the primary and secondary windings and can therefore withstand the elevated 5kV test procedure," Blöhbaum wrote. "This extra isolation is not only favorable for added safety. It lowers the coupling capacitance between the primary and secondary coils and therefore has a damping effect on unwanted noise, which could be picked-up from the mains supply. In these days of myriad switch-mode power supplies in every household, this is an important feature."

I asked Blöhbaum about the design concept behind the SV-737. "The power amplifier is designed [to have] a very linear characteristic, like a 'straight wire with gain'," he replied. "It ... has a large phase reserve for dealing with complex loads easily (footnote 2). While the power amplifier consists of transistors, the preamplifier uses tubes." The tubed preamplifier, though, is designed to have "a linear characteristic with a tiny flavor of the sweet second harmonics of triodes. 'Tiny' is important! It should not harm the signal integrity at all! An amplifier is not a musical instrument, but it should bring the amplified music to life. The idea was to combine a very linear and neutral power amplifier with a sweet, singing tube preamplifier. Finally, the result should be like a triode amplifier on steroids, ... capable of playing music with a well-balanced clarity."

Bass fishing
I ran my Kuzma and Thorens turntables into the Tavish Audio Design Adagio phono preamp; a pair of Triode Wire Labs Spirit II interconnects connected the phono pre to the SV-737. For files and streaming, I used my Asus Windows laptop as a digital source, but because the Vincent lacks a USB connection—a notable omission in an age when computers are often used as digital sources—I used a Wyred4Sound µLink converter to adapt the laptop's USB output to TosLink. To play CDs, I connected my Tascam 200iL CD player to one of the SV-737's analog inputs via a 1m pair of Shindo Laboratory interconnects. To compare the Vincent's onboard DAC to my Denafrips Ares II DAC, I used an AudioQuest Forest digital cable and Triode Wire Labs Spirit II interconnects. I hooked up the Klipsch Forte III floorstanding loudspeakers to the amplifier, and off I went.


Footnote 1: AEG showed the first practical audio magnetic tape recorder, the Magnetophon K1, at the Internationale Funkausstellung Berlin in 1935.—Editor

Footnote 2: "Phase reserve" refers to the ability of an amplifier to deal with complex (specifically, capacitive) loads.—Editor

COMPANY INFO
Vincent Audio
US distributor: Pangea Audio Distributing
5500 Executive Pkwy SE
Grand Rapids, MI 49512
(866) 984-0677
ARTICLE CONTENTS

COMMENTS
georgehifi's picture

"It is possible that one of the small-signal tubes in the review sample was not performing to specification"

This happens all too much for my liking with reviews. You would think a manufacturer would make sure that the sample given for review, was even better than stock, before giving it for the review??

Cheers George

mememe's picture

After reading many reviews of tubed gear I've come to the conclusion that review samples are likely, but not guaranteed, to suffer from some form of
tube related problem. But hey, after paying for the product you should swap out the OEM tubes and get the sound the reviewer preferred.

tonykaz's picture

It's pricy enough to be designed & made in California with a 5 year warrantee, isn't it?

The rear panel is supposed to clearly show Country of Origin , we all know why it's not. Why are we allowing ?

Tony in Venice Florida

John Atkinson's picture
tonykaz wrote:
The rear panel is supposed to clearly show Country of Origin . . .

I take a photograph of a product's serial number when I receive it for testing. This was the Vincent's serial number label:

It doesn't include the country of manufacture but Ken Micallef does say in the review text that the SV-737 is manufactured in China.

John Atkinson
Technical Editor, Stereophile

tonykaz's picture

The last time we discussed this, you mentioned that You included the Country of manufacture in the Spec. list along with the Serial Number. Perhaps you changed the Editorial Policy. Still no specification inclusion this time. hmm.

The funny part is that no Photo of this product includes the Country of Origin, nowhere on a Google Search, nowhere on anyone's mentions.

Yes, the High Integrity Mr.KM does dutifully say China but he's not anyone, he's Somebody !

Thanks for writing, nice hearing from y'all.

Tony in Venice Florida

ps. hiding China seems Shame Based

Jack L's picture

Hi.

Agreed. 'Cunning' business !!

An audio manufacturer already established 26 years in Germany apparently does not want to be criticized for productionn cost saving by OEM offshore in China or other so called 'undeveloped' countries at the expense of production quality compromise.

IMO, what can be a smarter business tactic: Killing 3 birds with one stone. Saving big production cost to mark down the selling price to sell more products & making good profit.

Simply NOT stating the country of production origin on the amp case, in the operation manual & on the packing carton box in order to steal the gooodwill of the consumers in the German brandname !!!!

Thnaks goodness. Stereophile reviewers are always so honest to their readers & tell nothing but true.

Jack L

PS: likewise, I always without exception acquire my cars built in its country of origin.

tonykaz's picture

China has been a Quality leader for most of the last 5 Centuries.
Why hide it ?

The product in the photos is probably for European distribution because it doesn't comply with USA labelling Laws. ( no one mentions that ).

Additionally, no-one mentions who actually manufacturers these devices.
There are Chinese outfits specialising in manufacturing all this Audio gear. Why not mention those outfits Company's Names?

There is the problem of Service: Is a Circuit Diagram provided for someone to service the darn things ? ( no- never ) Not accommodating service needs makes these pricy devices "throw-away" when it fails or has any sort of issue the Importer can't cope with. ( I've Imported Audio Gear )

I expect a High-Integrity Journalistic Standard when it comes to reviewing gear from a mostly hidden group of gear manufacturers. All that has to be done is to ask the Designers and importers who is manufacturing the piece. ( the embarrassing thing might be that they don't actually know ).

The 1,000 lb Gorilla is that "Made in California" will outsell "Made in China" by a considerable amount.

Tony in Venice Florida

ps. White House is asking Federal Trade Commission to rule in favour of "Right to Repair" which will open up Serviceability for all this unserviceable Chinese stuff.

ps. 2 ) Apple still does not provide Schematic Diagrams for any of it's products ( it did at one time ). & Apple is about to achieve a Dominant Position in most of High End Audio with it's highrez iTunes changes.

Long-time listener's picture

And well-implemented too, unlike the very strange tone control response curve seen in the recent Marantz Model 30.

Lars Bo's picture

Thanks, Ken - always great to read your reviews.

Maybe I misunderstand the quote, but the 85a2/OG3 tube is not new at all to audio. Several brands have used/uses this in voltage regulation, and for decades e..g. Croft have used this quite inexpensive tube.

Thanks again

X