I don't want to embarrass my friend, so in this story I will call him O., for Mr. Objectivity.
One day, O. and I made a little pilgrimage to hear a mutual friend's million-dollar audio system. We listened for hours: LPs, CDs, hi-rez files—you name it. At the end of the session, both of us complimented our friend on the high quality of sound his expertly set-up system was generating.
During the ride home, I began quizzing O. about what he had experienced, and compared his observations to my own. After a lengthy discussion, it was clear that we had both heard the same sounds; we had both noticed the same bass, treble, midrange, soundstaging, imaging, and lack of distortion. But he loved the system. I only admired it.
I told O. I found it lacking in two ways: instrumental colors seemed less than full-spectrum, and momentums felt sort of staid and unsupple. I thought the system sounded Puritan. O. then reminded me that "The system's greatest virtue was its astonishing coherence." I agreed. At the close of our comparisons, I asked O. if he didn't think the system "sort of dragged its hind leg." He squinted and gave me an annoyed look. "Yes, Herb; maybe it did."
I learned something important that day: Experienced audiophiles will "observe" the same pulsing matrix emanating from the loudspeakers—but each, in his or her own naturally prejudiced way, will notice different things and assign different value to the phenomena they hear.
My need to tell you the above story appeared exactly one day after I installed the Emotiva Audio Corporation's new XPA Gen3 modular power amplifier in my humble Bed-Stuy reference system. This need occurred because, when I removed the heavy, two-box, dual-mono, single-ended, tube-rectified, five-watt Woo Audio WA5 amplifier ($5899), and replaced it with the much lighter, class-AB, balanced/single-ended, solid-state, 300W (into 8 ohms) Emotiva XPA Gen 3 ($999), I became anxious and confused. I had never before experienced such a dramatic difference in sound character by changing just one component. More important, I feel certain that Art Dudley and I and O. would all disagree about whether or not the sound had improved.
Description
The modular Emotiva XPA Gen3 can be ordered with two to seven channels. It's quite powerful, the two-channel version specified to output 300W into 8 ohms, 550W into 4 ohms, or 800W into 2 ohms. It's also relatively large, at 17" wide by 8" high by 19" deep, and relatively light despite its steel case: 35.5 lbs. The main cause of this relative lightness is the Gen3's switch-mode power supply and rail-modulating class-H operation: the B+ voltage can be instantly raised in response to increases in input-signal level. Emotiva refers to their implementation of class-H architecture, which increases efficiency and minimizes the need for massive heatsinks, as "Soft-Switch" technology.
The Gen3's front panel is simple and attractive, in an anthropomorphic way. The halo ring-light of its standby/on button, surmounted by two status LEDs, makes it look like a "wow" emoji. All three front-panel lights are activated by the rear-panel on/off rocker switch next to the IEC power-cord socket; above which is an oversize circuit-breaker button and a tiny switch, labeled Status LEDs, for turning off the front-panel eyes/status indicators. Each of the Gen3's amplifier modules (two for stereo) has switch-selectable unbalanced RCA and balanced XLR inputs, and a pair of five-way speaker binding posts.
The XPA Gen3's input impedance is 33k ohms balanced, 23.5k ohms unbalanced—which should be sufficient for use with tubed preamplifiers. The specified damping factor is high: >500 into 8 ohms.
Listening with the Zu Audio Soul Supreme
The first loudspeakers I connected to the superpowerful Emotiva XPA Gen3 were the supersensitive (97dB/2.83V/m) Zu Audio Soul Supremes ($5625/pair). Instantly, I noticed the fearsome potential force of the Gen3's output stage and switch-mode power supply as they insinuated themselves against the 16-ohm nominal impedance of the Soul Supremes' full-range drivers. I was shocked at how overtly solid every recording became. This unusual solidness was almost brutal. All aspects of soft or feminine had disappeared. Image focus was tight in the extreme—and felt very not real. Sharp-edged contrasts upstaged vocal nuances and delicate rhythms. I became concerned. I hadn't expected this. I was astonished by what a few extra watts and a high damping factor were doing to the low-power-friendly Soul Supremes. Obviously, this was a less-than-dreamy pairing of amp and speakers.
So I shrugged my shoulders and installed a pair of speakers with a totally different impedance characteristic: the Magnepan .7s.
Listening with the Magnepan .7
I suspect that the $999 Emotiva amplifier was specifically designed for difficult-to-drive, $1400/pair speakers such as the Magnepan .7. The .7 is a 57"-high, quasi-ribbon dipole speaker with a specified impedance of 4 ohms, and thrives on a class-AB amplifier that doubles its power each time the load impedance is halved. The Emotiva approximates but doesn't quite fulfill that requirement.
O. is no fan of the Magnepan .7. He thinks it is "not accurate to the source" and would likely "measure poorly." He should have heard the Maggies singing with the Emotiva XPA Gen3. I would never tell him this, but I think O. should smoke a joint before he listens. Nevertheless . . .
I wish O. had been there that dreary, rainy afternoon in late April when I played the title track of Miles Davis's Bitches Brew (LP, Columbia CS 9995). Miles's trumpet penetrated the dense, wall-to-wall, floor-to-ceiling soundfield with the most elastic and saturated tones. The bell of his trumpet was right there in front of me. The layered complexity and fierce drive of Bitches let Miles's dreamy brew feel new every time I play it, and that dark day it felt newer and fresher than usual, sounding extra-lush and expansive as it mixed with the clatter of a heavy rain. The Emotiva made the recording's reverberant space sound more musically and structurally relevant than I had previously realized. This record, these tall speakers, and the XPA Gen3 were producing really big, juicy Miles music, in CinemaScope and Technicolor. I thought, Not bad for $2400 total!
If there's such a thing as sweet, sexy sound, then that is the kind of sound Bitches Brew was making. The Emotiva amplifier held and guided the Magnepan .7s with almost a lover's touch: not too tight, not too loose. Together, they made vocal tones and instrumental textures into a pulsing, flowing, sensual delight, and made soundstages and performers' images on them larger and more tangible than they could ever be with a small, stand-mounted speaker.
The only thing O. could possibly say against this fantastic, moderately priced system is that it played a little softish and roundish. And it did. But so what? It made Black Uhuru's Red (LP, Island MLPS 9625 A) sound exactly as I'd always wanted it to. It made Paul Butterfield's first album, The Paul Butterfield Blues Band (mono LP, Elektra ELK-294), sound exactly as I remember it sounding from my Chicago childhood. It made me want to try music I'd never liked before.
If you're one of those readers who claim, "I'm a music lover, not an audiophile," or who think high-priced audio is mostly snake oil, then you absolutely must try the combination of Emotiva XPA Gen3 and Magnepan .7. It could satisfy your mind on both counts.
Listening with the KEF LS50
As I aligned my 24"-tall Sound Anchor speaker stands to the marks I'd made on my bunker's floor for the KEF LS50s, I thought, If the Emotiva XPA Gen3 can't make these speakers sing like birds, what good is it? I swear, if the Gen3 and LS50s don't let Ralph Stanley and Roscoe Holcomb take me to church, I'll be writing my first bad review in a long while.
 | |||||||||||
|
|
| |||||||||
COMMENTS
"I don't want to embarrass my friend, so in this story I will call him O., for Mr. Objectivity."
You should be proud of your friend. His is the correct way of assessing audio equipment. If measurements are bad, ditch the stuff!
Audio equipment is for listening to dude. Measurements matter only when you measure the right stuff, and we haven't figured out all the right stuff to measure yet and likely the right tools haven't even been invented yet
Measurements only tell us what we want them to tell us.
I am sure there are measurements that will effectively tell the whole picture someday. Until then, they simply reward preconception and bias. I wonder what each of the reviewers would write knowing what the measurements were ahead of time. I surmise the most brave and honest would not flinch in the least (notably MF and AD).
I think if every review were given the small side-bar of writing space and the brunt of the article devoted to measurements, there would a fraction of the readership.
'Stereophiles' will never get excited about how a component measures- only how it sounds. 'Sterophile' as a lover a stereo is still the best definition, incidentally.
Hello ,
That's a pretty ignorant position , listening and measuring occupies two distinct positions, both are required when making a decision .
Regards
I love these discussions.
Interesting, to me, almost all the 'objectivists' I know shop by listening to gear. Do you just check the specs?
What comprises your system?
Probably most interesting would be how you choose speakers. I find I can only do it by listening, which, of course, renders me a pitiful subjectivist.
Your second sentence is not an example of clear writing :)) But I'm doing my best to decode and answer it.
Yes, I mostly just check the specs. What else is to do there? Do studio engineers indulge in auditions to see what distortions they prefer or do they just go for the most accurate gear? You should do the same. I know I do.
I choose speakers based on measurements and budget (of course). Sometimes I listen to them, but find such "auditioning" to be an almost complete waste of time. Speakers sound different when you move them from the showroom to your listening room anyway. If you are serious, you will need to measure your room and reprocess the source music anyway. Start with speakers with a reasonably flat response curve and fix them with equalizers.
I must have made a typo on shop and Spellcheck changed it to should!
"Do studio engineers indulge in auditions to see what distortions they prefer or do they just go for the most accurate gear?"
They go for the distortions they can live with. I recall a session at Skywalker, WATTS were on hand to demonstrate the inherent limitations of the 16 bit recordings we were making. The Head engineer decided on some British Mini-Monitors he was used to, the WATTS were distracting in comparison.
I hope then you are praying for JA's continued good health... Apart from a certain German magazine (that does a bit of measuring), I don't know a single other magazine that shows such a comprehensive set of measurements. I'm not an objectivist, but even I enjoy reading them.
These are the good ol' days...
I am totally grateful for his measurements. For example, I traded in a pair of NEAT speakers after reading one of his his reviews. If a manufacturer produces even a single piece of gear that does not measure well, I refuse to buy ANYTHING from that manufacturer.
1. Micromega M-One + Focal Aria 936
2. Quad VA-One + Quad S1 (BTW, this amplifier is great if you like to measure gear -- and you should give measuring gear a try. That way you will know that they have not snookered you with a bad output transformer.)
3. O2 Headphone Amplifier + Philips Fidelio X2
And yours?
"Probably most interesting would be how you choose speakers. I find I can only do it by listening, which, of course, renders me a pitiful subjectivist."
That's not true. You can certainly have an objective viewpoint without running your own measurements.
IMO objectivism is simply an acknowledgement that there are factors which can be elucidated and judged regardless of individual preferences and psychological mechanisms.
- Is a speaker capable of reproducing the frequency from 20Hz to 20kHz?
- Is a DAC truly hi-res and able of >16-bit dynamic range?
- How many watts can that amplifier produce cleanly?
- What is the nature of the time domain step response for that speaker?
An objectivist I think tries to understand this stuff and incorporates that understanding in determining whether the product is worth the money. Some things are hard to do - eg. frequency response flat to 20Hz so if objectively a speaker can do this well, then I'd be happy to spend more money for example...
This is why I appreciate the value of Stereophile - that despite the arguments and debates, as a magazine it does try to incorporate the subjective and objective elements in a review.
Open baffle Lowther-based horns. (I don't like box resonances nor crossovers.)
McIntosh 275 amps in mono configuration.
ModWright SWL 9.0 Anniversary Edition pre amp
ModWright PH 150 phone preamp.
Sony PS X800 turntable, rechipped (!) with Clearaudio Maestro 2 cartridges.
Michell Gyrodeck, 1985, Pabst motor, Zeta Van Den Hul arm and Shure V-15 5 MR 'needle.'
Technics SL 1200 GAE with Charisma Reference 2 cartridge (I like vinyls.)
Esoteric DV 50 S digital player thing.
(I am playing with an IFi Micro 2, I think it is, for the Michell table. man, it is amazing for the price.)
_
I other rooms, I like various things.
I like to listen to how different gear sounds, so I rotate things in and out.
Current joy in a very small loft is a pair of Infinity Intermezzo 2.6 speakers (300 bucks, used) driven by an SMSL 160 (99 bucks from Amazon) and an Oppo UDP 205. A pair of Audioquest silver interconnects (o.5 meters via HCM Audio) and some home brew speaker cables. It sings. I wish we could post pics.
My M-I-L lives with us and in her apartment is a Yamaha C-4 preamp, M-4 amp, and NS 1000 speakers, with a Marantz SACD player from about 7 years ago.
Lastly, family hang out room. Marantz CD-SACD changer, also about 7 years old and drawer motor is dying so soon to be replaced. To Krel KAV 300i integrated to Cerwin Vega XLS 215...which I adore.
When we finish our basement, I have some fun stuff ready to go, hopefully 2018!
Cheers, and apologies for not checking back.
You have some very nice gear!
I am also thinking about getting the MC275, but would not use it in mono--too expensive, you need two.
No need to apologize, we all have other things to do, not just audio.
Best,
MM
"Measurements matter only when you measure the right stuff, and we haven't figured out all the right stuff to measure yet and likely the right tools haven't even been invented yet"
How do you know this? Can you recommend any peer reviewed studies?
For many things, an "N" of one is powerful enough to determine whether or not a hypothesis is valid.
Example: I hypothesize that stepping in front of an oncoming train is dangerous. How many trials are necessary before my data qualifies as valid?
So, if I listen to a piece of gear and say I like it, or not, why on earth would you want to insist I have a peer reviewed validation of my opinion?
You can't take my word for it that I prefer one thing over another?
With regard to Mr. O, did you notice how he reached his conclusions about all the different gear? Yup, subjectively. Inside every 'O' is an 'S' who is repressed.
my reports for Stereophile ARE "peer reviewed studies"
in the start of your review, but then was annoyed when caught out in his own act of 'lying' to himself about the sound. (By 'lying', I mean trusting ones' own preferences, rather than challenging ones' audio value-system consistently.)
There were huge flaws that you heard, but only until you brought them to his attention, did he admit that this system was flawed.
His possible bias (about money dumped on the system and it's 'inherent' performance expectations) is much like a bias about measurements. It encouraged a bias that was proven wrong when one further defines and explores what one heard (and confounds as well... if this expensive system measures well, and was reviewed well, what gives?? Set-up, synergy and component matching...)
I have heard some really crappy $100,000 system demos (with very well reviewed components) in the past that my cohorts admit after challenging them; that it too, was a poorly-set up and performing system with major issues, after they got past the price-tag demanding such 'admiration' from the casual listener.
Proof that a review needs more than a few hours of listening, and how 'peer reviewed' input can assist in breaking bias. I think the same holds true for measurement assumptions.
One draws assumptions by analyzing measurements and only when the review and the data coincide do they provide meaningful insight into a component's sound. When they differ, head-scratching always follows (and doubt from those that don't trust their ears first).
(Yes, I heard you this month and I do agree about attention as a concept, and personally, I try to challenge my own attention 'requirements' at every critical listening opportunity possible for many years. Without that, how I am learning about my own system?)
(All audio purchases require a return policy from a trusted audio dealer that will allow the true nature of the component- in our own system- to shine through, and give us recourse when it does not fit our long-term attention.)
AD and Herb have brought the concept of 'Force' to the minds of many readers... and reviewers! Kudos again to both reviews. Very thought-provoking and extremely important to the study of our hobby.
I think we have a different interpretations of "peer review". In science, your peers can ask you to update/improve your papers. They can also reject your submissions. I don't think that anyone has the courage or clout to reject your reviews :)
@ mrkaic : Are you asking for specific peer reviewed studies that look at exactly what i wrote...or would pointing you to the IEEE site where you can for yourself search the number of new measurements techniques, methodologies and "tools" created over the last 5, 10, 15 , 20, 30, or 40 years be enough to extrapolate the very essence of my meaning. Alternatively if you are a member of the American Association for the Advancement of Science (AAAS), you could do the same there. The point being that if one has an applied science or science background one should know that research is continuous and furthermore these fields have advanced beyond what I would have imagined when I graduated in the 1980's. Spend some time perusing the fields of nanotechnology and spintronics to get an understanding of where we are headed. Good luck, its actually fun and fascinating.
I can do the search, but you seem very knowledgeable about these things. If you can provide a few links, it would be great.
@mrkaic
"Measurements matter only when you measure the right stuff, and we haven't figured out all the right stuff to measure yet and likely the right tools haven't even been invented yet"
How do you know this? Can you recommend any peer reviewed studies?
----------
LOL! Nice one. Now, back to sanity...
Assessing audio is not equivalent to stepping before a running train. Yours is a bad analogy.
I like the idea that the person paying for the purchase determines the decision criteria. Humans are a highly subjective species.
Emotiva is about value. There are many among us who's budget is Class H, and to find Class B sound at Class H prices is a home run! Thanks for the review!
I believe Class B is considered to be inferior. Perhaps you meant Class AB. Maybe Emotiva would prefer to present its own value claims.... lol
In this context, Class B and Class H refer to the classification within Stereophile's Recommended Components list. Meaning this Emotiva warrants a performance designation of Class B and a cost measurement of Class H. By definition, that's value!
There is no Class H in the "Stereophile" Recommended Components universe. There are Class H amplifier topologies - I believe it means one thing in the US and another in the UK. My wry comment stands.
In all my prior comments I referenced Class H, but I meant Class K. So, what I literally said was rubbish as you wittily pointed out. I meant to say Class K - "keep an eye out" (my paraphrasing), which is not the best analogy either (Class B for Class K).
I only meant so say, Class B performance for not a lot of money, and I failed miserably!
It can be mildly amusing when people accidentally say the opposite of what they intended. Except when I do it. In those cases a neurologist should probably be summoned.
Emotiva has been exciting.
Now, Schiit has it's 400W. Mono Amp for $699.
During my Retail Days, I ( we ) favored Electrocompaniet Mono Amps., back then I'd be paying $2,000 each.
Now, we can have the Emotiva for $1,000 ... or a pair of Schiit Mono's for $1,400. Phew.
Schiit has Audiophiles loving them ( like me ), Emotiva is Pro stuff finding it's way into living rooms.
I'm a Left Coast leaner rather than an Elephant leaning Tobacco Country loving person. ( I just quit Smoking so I'm now a Tobacco Apostate ! )
Still, Schiit has that Shitty Name. My Minister Wife won't tolerate potty naming stuff or potty humor. Schiit should be Stoddard & Moffat Inc.
Schiit has that 4 ea 6SN7 PreAmp for $699. ( aren't 6SN7s the Kings of PreAmp Tube-ology? )
The Full Schiits would be $2,100 with their Big DAC adding $2,500 making the total of $4,600.
Can a Trustworthy Stereophile person ( HR ) pllllllleeeezzzzzeeee tell us what to do?, which way to turn?, what to believe?
What HI-Fi?
Thanks,
Tony in Michigan
ps. With Baited Breaths, I wait, impatiently, for the story about the Manhattan DAC - I'm spitting out those dam worms, petueee!
...and assemble a superb amplifier yourself.
Thanks for the tip, Mrkaic.
I could agree with that type of thing except I seem to prefer Brand Name stuff to the junk I create with a soldering iron and a box of parts.
I don't even work on my Wife's Car.
I built Ham Radio Stations, back in the 1950s, till I could afford the Good Gear, then I owned Collins stuff.
I understand that the Recording Engineers will build and maintain their own electronics.
Now-a-days I like the shinny lights of CHORD stuff and the polished performance of well designed gear.
Thanks for mentioning Hypex.
Tony in Michigan
I didn't know it was out and will try to find a way to hear it!
Geez, we're able to have some pretty darn-good Music Systems for 1985 Era Money.
A CHORD Hugo2 + some Genelec 8020s w/Sub for $3,500
A Full Schiit System + some Magnapans for $6,500
A PrimaLuna System with nice Speakers for well under $10,000
Back in 1985, a Full Electrocompaniet System, a VPI Table/Arm/Koetsu + a Pair of Thiel CS3s w/MH750 Cables would Retail-out for $10,000.
I don't quite know if the Loudspeakers are any better now than 30 years ago but I'm feeling like the Electronics are better and lower priced, plus they don't have to cope with low signal sources like phono cartridges.
It's a great time to be an "Audiophile" or a "Stereophile" or simply a gear buying "Music Lover" ( like me ).
Tony in Michigan
Stoddard & Moffat Inc. = S&M???
People, Herb is O!!!
Herb is Tyler Durden!
I reread the review and O stands out like Patty Lane, or is O Cathy Lane!?!?!
Ofcourse listening impressions are the most important as the amps are for listening to music. Here the threshold of hearing v.s. distorsion is paramount.
Anyways, its remarkable that amps designed with todays tools and components are no better than amps from the eighties. Quality of design doesn't seem to be a priority nowadays.
Hi all, I'm deciding between the Emotiva XPA7 gen 3 vs Monoprice Monolith 7x. Which would you choose for watching movies? Assume the price is the same because although the XPA7 is cheeper, they do free shipping. So they are roughly the same price. thanks
SPONSORED VIDEO
FEATURED VIDEO
| Loudspeakers Amplification Digital Sources | |
Analog Sources Accessories Featured | |
Music Columns Retired Columns | |
Show Reports | |
Features Latest News Community | |
Resources Subscriptions |
© 2024 Stereophile
