Pass Laboratories INT-60 integrated amplifier

If I told you that Pass Laboratories' INT-60 integrated amplifier ($9000) was engineered by meth-lab trolls, its faceplate was wonky, its transformers buzzed, and it made every instrument sound like a tambourine, you'd think I was a crackpot with some kind of axe to grind, right? Because I suspect that, like me, you've never experienced or even read about a Pass Labs amp that didn't sound good.

What if I said that the Pass INT-60 is a reference-quality stereo integrated amplifier that reproduces recordings in a manner refined and sensuous? That it has a nicely sculpted enclosure that looks expensive and feels timelessly tasteful? That it puts out 60Wpc into 8 ohms and powered every speaker I tried with steady, tantalizing assurance?

Review over. Are you ready for me to coddiwomple? Or would you prefer I discuss the virtues of high-bias class-A vs class-D amplification?

Or should I attempt to answer the No.1 question that the mere existence of the INT-60 poses to everyone who experiences it: Is it the best integrated amplifier ever?

Because I'm a New Yorker, I always answer a question with a question: How can I know if a painting I saw in a museum, a book I read, or that beer I just drank, would be considered "good" by anyone other than myself? Can I ever objectively assess the quality of my private experiences? Or yours? I think that assigning value to temporal experiences is, at best, a dodgy concept, but I do it all the time—inside my head. Sharing those in-my-head evaluations with a scrutinizing public is beyond difficult, and is best done with extreme caution. Even then, I can do it only in a comparative, anecdotal, or poetic fashion. Why? Because as quickly as my experiences occur, they are turned into memories—and you know how sketchy memories can be.

And what about measurements? Can John Atkinson's graphs of impressive sinewaves and squarewaves corroborate relative value? Maybe . . . but, as my friend Steve Guttenberg always says, "Measurements are useless at predicting user preferences."

Ultimately, the virtue of an audio component must be judged solely on the quality of experience it delivers to someone using it to listen to familiar recordings. Therefore, as a reviewer, the most effective tools I can employ are: memories of a lifetime of musical pleasures, a handful of interesting recordings, and some rigorously honed connoisseurship. If you stay with me, I will apply all three to the heaviest and most gratifyingly effective amplifier that has ever graced my Bed Stuy hermitage.

Description
Pass Laboratories, founded in 1991, has at least three Daoshi, or high priests of Taoist amplifier design: Nelson Pass and his colleague, Wayne Colburn, plus a new hire, Jam Somasundram, who designed the HPA-1 headphone amp, all of whom create fresh new inventions based on the ancient alchemy of single-ended, class-A amp design.

According to a statement by Pass on his company's website, the INT-60 isn't literally identical to its standalone counterpart, the XA60.8 [60W monoblock power amplifier]: "[I]n particular the INT-60 is a stereo amplifier using the hardware of a single-channel XA60.8, and it necessarily has lower bias current in the output stage and does not operate [in] class-A to 60W, rather somewhat less than half that.

"There are a couple new wrinkles to the 'preamp' portions of these two products. The volume-control circuit outputs are buffered by 6dB gain stages whose input JFETs present many megohms of load, getting attenuator distortions down below the 0.001% line. The extra gain allows optimal figures for the power-amp stages, and offers improvement over the previous 'passive' circuits."

The INT-60 comes set to 29dB gain; removing an internal pair of jumpers adds 6dB more. At the lower gain, about 800mV will drive it to full power. "Each channel has 20 power transistors rated at 150W each," Colburn told me. "The power supply is a large toroid rated at 1kVA feeding 240,000µF of capacitors in multiple filtered sections." Illustrating this point with comparisons to two different series of Pass Labs power amplifiers, Colburn said that the power supply in the INT-60 is an XA60.8 supply, not an XA60.5 supply.

The elegant front panel, designed by Desmond Harrington, has Standby and Mute buttons, four input buttons, a Volume knob, and one of Pass Labs' signature needle-and-scale meters, this one indicating when the INT-60 slips out of class-A and into class-AB. According to Kent English, of Pass Labs tech support, a "[p]ianissimo note has the meter staff left of 12 o'clock," and a "[f]ortississimo note has the meter staff right of 12 o'clock . . . and well right of 12 o'clock, the meter hits the right-hand stop at about rated output."

1216pass.bac.jpg

The INT-60's rear panel features four line-level preamp inputs: two that offer both XLR and RCA connectors, and two more offering RCAs only. Also included are two preamp outputs (XLR and RCA); two pairs of high-quality speaker binding posts, built with torque-limiting ratchets; and an AC power switch, IEC mains socket, fuse holder, and ground post.

Listening with the Zu Audio Soul Supremes
As some of you know, here in Bed Stuy, I'm my own one-man religious order: the Hermit of Hart Street. Wearing black and cloistered in my leafy grotto, I use as my daily prayers the sacred music of the world's diverse cultures. The biggest part of this spiritual practice involves listening to every LP of Gregorian chant or early music I can find. I especially enjoy the well-played, superbly recorded offerings from French Harmonia Mundi. Lost in meditation . . .

I'd taken at least a dozen tours of both sides of Konrad Ruhland and Capella Antiqua de Munich's Chants Grégoriens pour le Temps de Noël (LP, Harmonia Mundi 5112) before I noticed the single example of polyphony, "Iube Domne Silentium." But it took me no time at all to hear the Pass Labs INT-60 demonstrating to me why the Zu Audio Soul Supreme loudspeakers ($4500/pair), which I reviewed in the July 2016 issue, aren't merely good but great. (Think perfect tonal character mixed with palpable sensations of realness.) It took me even less time to recognize the clear sophistication the Pass integrated brought to these mesmerizing performances recorded in 1972–73. Imagine a real acoustic space vibrating with 10th-century plainsong floating above an abyss of reverential audio silence. Imagine the most delicate and well-defined choral textures. Imagine no excess added reverb distracting from the torchlit atmosphere of the recording venue.

The Soul Supremes can sing and chant with only a few watts; typically, they sound present, fast, and superdetailed through the midrange, but with a slight bit of extra energy between 2kHz and 8kHz. The INT-60 seemed to mitigate that extra energy. That clanky piano sound that John Atkinson referred to in his write-up of his measurements of the Zu became relatively unnoticeable. The Soul Supreme's bass is always quick, clean, and a little lean; with the INT-60 it was less lean, more muscular, and BIG.

In my room, this amp-speaker combination made me bless Pass and venerate Zu for their contributions to some of the best reproductions of music I've experienced this century. If you wonder about my personal taste in audio—what kind of sound I really like—this is it.

Listening with the Magnepan .7s
I don't care what class of "Recommended Components" El Capo puts them in—I love the Magnepan .7 loudspeakers' ($1400/pair) fundamental musicality, détail liquide, and spectacular imaging. The Pass Labs INT-60 drove the .7s with more subtle magic, slam, and lush joy than I'd previously heard from these speakers. But occasionally, that joy got a bit too lush.

COMPANY INFO
Pass Laboratories Inc.
13395 New Airport Road, Suite G
Auburn, CA 95602
(530) 878-5350
ARTICLE CONTENTS

COMMENTS
Allen Fant's picture

Great as always review- HR.
The Pass Labs & First Watt integrated amps are on my short list to demo. Several choices in each brand- which one shall I start auditioning?

findcount's picture

bet they could sell this amp 30-40% cheaper if they didn't used an over-the-top chassis

Anon2's picture

There's a whiff of a self-serving argument in the 6th paragraph of this article. I am sure that this integrated is a fine piece of equipment. But to dismiss "measurements" is one many postures of the audio community that needs to be challenged.

"Measurements" don't matter; only some ethereal out-of-body experience does. Well, then why not join the ranks of most audio publications and stop going through the sweat of "measurements" altogether?

Based on my research only Stereophile, Soundstage! (Canada), and audio.com.pl (Poland) bother to do comprehensive measurements on a regular basis. Credibility is gained in my book by the efforts made to subject equipment to the objectivity of measurements. Soundstage! proudly enters disclaimers of how their methodology complies with those of the Canadian Bureau of Standards.

And, yes, measurements do matter, particularly for those of us on a budget. Measurements show where there is superior workmanship done on a budget.

I recall reading in a leading car magazine about 18 years ago that my sporty, econobox Japanese sedan had "measurements" that were quite similar to a German import costing over 2 times as much. But perhaps I missed the sublimities of the leather seating and all of the prestige. Forget that the car was not much faster, not much more powerful, and had about the same dBs (bad ones for automotive pursuits) of sound inside the driver's cabin.

I have also found that my favorite brand of timepieces (available for a reasonable price today at a mall near you) has a 5 year warranty. To my surprise, much of the finery of Geneva and Le Chaux de Fonds, costing 10 times as much, or more, often comes with a much shorter warranty.

Instead of asking why "measurements don't matter," I'd ask another question. Why does a product costing $9,000 not have better measurements, in some areas, than a $999.00 Class C integrated amp listed on the current line-up of "Recommended Components" in this publication?

I for one am delighted that I have the "better measurements," and a good audio experience to boot, off of an integrated amp (the predecessor of your Class C item) which I purchased as dealer demo for 8.7% of the price of the item under discussion in this article. I hope this fine piece of gear in this article is 11 times better than what I found on a Saturday afternoon.

Oh, and my car: it lasted 17 years; probably it out-lasted its luxury rival, and spent less time in the shop. My watch is still going strong after 15 years.

This publication, and the audio hobby in general, can't afford to dismiss the value-for-the-money trade-offs that exist in this pursuit, most your readers do it every day; we look at the "measurements," too.

Jason Victor Serinus's picture

Read the paragraph again:

And what about measurements? Can John Atkinson's graphs of impressive sinewaves and squarewaves corroborate relative value? Maybe . . . but, as my friend Steve Guttenberg always says, "Measurements are useless at predicting user preferences."

jason

Long-time listener's picture

"Measurements are useless at predicting user preferences."

??? I find measurements quite useful at predicting MY preferences--and I'm a user, aren't I? I have learned, through correlating measurements with listening, to avoid like the plague any speaker that shows signs of upper-midrange or presence-region forwardness, or that has certain other anomalies that I hate. Likewise there are certain features I look for in amp measurements.

jmsent's picture

which measurements you are referring to that are inferior to the $999 model? From what I see, the measurements of this amp are quite excellent overall. Certainly nothing to disqualify it from sounding absolutely superb. All engineers engage in trade-offs. You can run tons of loop feedback in an amplifier and get lower distortion specs, but often at the expense of sound quality . That's not the way Pass designs their amps.

jim davis's picture

I recently displaced an Ayre AX5Twenty in my main system with the PASS INT-250. If one can afford the step up from the INT-60, I strongly recommend it. The added bonus is not only are the sonics superior, but so is the interaction with the manufacturer. Kent English at PASS couldn't be more invested in ensuring a new customer's delight with a PASS product. Apparently, Charlie H has schooled the Ayre staff to make it clear that customers were clearly misguided to call Boulder and that their concerns would be best directed to their respective dealer.

cgh's picture

My understanding is they are different. Both are "point 8" but the 60 runs a higher bias and is class A up until 30 watts. The 250 leaves class A at 16 watts.

jag's picture

i just purchased the new Rega Brio integrated amp. for $1000 it will give any SS amp i have heard a run for it's money. ethereal highs and profoundly musical. a heavy hitter at only 50 very powerful watts. seperate power supply for the pre-amp which simulate Class A sound. one does not have to spend crazy money for high end sound.

X